Kirloskar end suction pumps type DB Range : Delivery size upto 150 mm Capacity upto 550 m3 / hr Heads upto 100 metres. Application : Suitable for Circulation of Water in Industries, Air-Conditioning Plant, Power Station, Mine Drainage, Lift Irigation, Sprinkler systems, Fire Fighting, Booster service, pumping brine, alkaline solutions, oils, benzene etc. for liquids having temperature in the range of -100 to 1000 C. Constructional Features : These are single stage, single suction, horizontal shaft type. They are made in accordance with DIN 24255. Models are available to operate at 1450 rpm and 2900 rpm at 50 hz and 1750 rpm and 3500 rpm at 60 hz. Material of Construction : Pump Casing and : C.I. / Bronze / Ph.Br. Casing Cover Impeller : C.I. / Bronze / Ph.Br. Shaft : Carbon Steel / St. Steel.
Kirloskar Horizontal Axially Split Casing Pumps type UP Thrubore Range : Delivery size upto 250 mm Capacity upto 950 m3/hr Heads upto 52 metres. Application : Suitable for handling water with slight impurities in Industries, Water Works, Storm Water, Irrigation, Sprinkler Irrigation, Fire-fighting, Air Conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Direct or gear drive. * Rotating assembly available for inspection or maintenance by removing only upper half casing without disturbing suction and delivery piping and motor. * Pump axis horizontal or vertical * Vertical pump, direct drive or with universal shaft arrangement * Highest reliability. Material of Construction : Casing half Upper/Lower - C.I.. / Bronze / SGI / Cast Steel / CF8M Impeller - C.I. / Bronze / Ph.Br. / Cast Steel / CF8M Shaft - Carbon Steel / ST. Steel Other materials on request.
CE Pumps Constructional Features 'CE' pumps are dimensionally conforming to ISO:2858 and DIN 24256. These pumps are horizontal, radially split, single stage, centrifugal end suction volute with top centerline delivery. The pump feet are integrally cast with the Delivery casing. The Impeller is of an enclosed type. The Bearing housing is fitted with a support foot. The pump shaft is supported by grease lubricated antifriction ball bearings as a standard scope of supply. Models : Following models are available in 'CE' Pump series. Unit-30 --------- Unit-40 --------- Unit-50 32/20 ----------- 40/26 ----------- 25/32 40/13 ----------- 65/16 40/20 50/13 Application Of CE Pumps * Water supply * Fire Fighting * Sprinkling * Irrigation * Air conditioning * Brine * Light chemicals * Drinking water * Industrial water * Cooling water * Swimming pool water * Condensate * Hot water * Clear juice.
1. WOTAC air to water heat pump has been tested and designed in accordance with European standard EN14511. 2. Strong automatic defrost function. 3. Water flow switch inside for water flow protection 4. Can be used both heating and cooling 5. With the famous water pump inside 6. Uses World famous brand compressor. 7. Uses eco-friendly refrigerant R407c or R410a. 8. Stainless steel cabinet (Powder coated steel cabinet optional). 9. Air side fins heat exchanger with hydrophilic coating 10. LCD, Carel controller are both available. 11. Energy recovery exchanger inside for sanitary hot water is option. 12.With Kind of function such as: High Pressure, Low pressure, Over heating, Phase testing, Discharge Temp. etc. Heating Capacity:11.5KW~18.0KW COP: 3.5-3.9 Certificates:CE,CCC, ISO9001. Carton box or plywood
1. All in one design,install and maintain conveniently. 2. water and electricity system is completely separated, assure using safely 3.the water temperature is set freely within 30-55 4.with magnesium nod inside. 5.Intelligent control 6.Compact design with 200L/250L/300L available for option 7. Stainless steel tank inside, plus 50mm insulation 8. Refrigerant R407c and R410a are available for option 9.Automatic defrosting function included. 10.Electrical heating element inside as back up for emergent request 11 Stainless steel or other colors cabinet for option 12.50HZ and 60HZ are both available 13. The tank is available to have pipe coil inside for the external heating source, such as heat pump, boiler or solar system. Heating Capacity 2.6KW COP 3.4 Certificates CE,CCC, ISO9001. Carton box or plywood
1. Famous water pumps inside, which ensures an easier installation and less space taken. 2.High efficiency compressor with R410a refrigerant. 3.Water flow switch equipped for water flow protection 4.Careful protection functions such as: high pressure, low pressure, and over-heating, overload anti-freezing, phase order, discharge temp .etc. 5.Water side equipped with AISI 316 steel plate exchanger 6. Carel and LCD controller is option. 7.Stainless steel cabinet for option 8..50HZ and 60HZ are both available Heating capacity 12~24.5KW. COP 4.92~4.96 Certificates CE,CCC, ISO9001. Carton box or plywood
1. WOTAC air to water heat pump has been tested and designed in accordance with European standard EN14511. 2. Strong automatic defrost function. 3. Water flow switch inside for water flow protection 4. Can be used both heating and cooling 5. With the famous water pump inside 6. Uses World famous brand compressor. 7. Uses eco-friendly refrigerant R407c or R410a. 8. Stainless steel cabinet (Powder coated steel cabinet optional). 9. Air side fins heat exchanger with hydrophilic coating 10. LCD, Carel controller are both available. 11. Energy recovery exchanger inside for sanitary hot water is option. 12.With Kind of function such as: High Pressure, Low pressure, Over heating, Phase testing, Discharge Temp. etc. Heating Capacity 25.0KW~38.0KW. COP 3.7-3.9. Certificates CE,CCC, ISO9001. Carton box or plywood.
All in one design, easy installation, low maintenance cost Unit, tanks all in one design, simple engineering installation, just connect water pipes and the power to use Maintenance and inspection is more convenient, simple operation Water, electricity is completely separated, safety use Unit-electric and water system is adopted without any connections, ensure security No auxiliary electrical heating, putting an end to such potential safety risks as electricity leakage, dry burning and power-on Water temperature is set freely, provide with softy Flexible setting the water temperature within 30 - 55¡æ, the widely range meet the user's needs Multi-purpose When heating, unit can be at the same time used for the indoor waster heat recovery, local dehumidifying, storage room cooling and ventilating Intelligent control Parametric design, for debugging on the scene Microcomputer intelligent control, scree lcd, room control, automatic power-down memory, defrost function, and automatic recovery to the original opareting mode after power-on. Temperature range is widely Using in -7 - 43¡æ condition All weather Regardless of the sunny, cloudy, rainy, nights, supplying with endless hot water Carton and splint
Durability: the advanced titanium water heat exchanger, can withstand the erosion of chloride ions in water, using shell quality double-sided galvanized steel plate, durability Energy saving and environment friendly: the heat pump technology, and other conventional water heating equipment (oil-fired boiler, gas boiler, electric boilers, and more) can save 65 to 80% compared with the operating costs of the environment pollution-free Design flexibility, easy installation: the overall design, compact unit pleasing in appearance, the installation of small size, isolation design, the air-cooled mainframe and auxiliary cold water separation structure, the water system entirely in indoor, completely prevent the winter freeze the situation Particularly suitable for the cold climate Easy to use: entirely in indoor, completely prevent the winter freeze, round-the-clock operation is enabled without being influenced by bad weathers and a precise water temperature controlling system is installed to ensure stable water temperature The use of safety: hydropower isolation, no fire, no leakage, and to ensure personal safe Carton and splint
Deep well water hand pump Hdpe and corrugated box
Flux: 4000ml/min Power: 18W Voltage: 24V DC.
YSSP250C-2: 17.2/18.5kg 22í-16í-31cm 250W 230V/50Hz&115V/60Hz 5000l/h 46í-34í-33cm/4pcs YSSP350C-2:18.2/19.5kg 22í-16í-31cm 350W 230V/50Hz&115V/60Hz 6000l/h 46í-34í-33cm/4pcs YSSP400C-2:18.5/19.7kg 22í-16í-31cm 400W 230V/50Hz&115V/60Hz 7000l/h 46í-34í-33cm/4pcs YSSP450C-2:18.6/19.8kg 22í-16í-31cm 450W 230V/50Hz&115V/60Hz 8000l/h 46í-34í-33cm/4pcs YSSP500C-2:18.8/20.1kg 22í-16í-31cm 500W 230V/50Hz&115V/60Hz 9000l/h 46í-34í-33cm/4pcs YSSP550C-2:19/20.5kg 22í-16í-31cm 550W 230V/50Hz&115V/60Hz 9500l/h 46í-34í-33cm/4pcs YSSP750C-2: 20/21.5kg 22í-16í-34cm 750W 230V/50Hz&115V/60Hz 10500l/h 46í-34í-35cm/4pcs YSSP900C-2:21.5/23kg 22í-16í-34cm 900W 230V/50Hz&115V/60Hz 12000l/h 46í-34í-35cm/4pcs. 46*34*33cm/4pcs
YSGP600-3 600w 2800l/h 37.5*21*26cm 7/7.3kg 1400pcs/CTN YSGP800-3 800w 3200l/h 37.5*21*26cm 7.4/7.7kg 1400pcs/CTN YSGP1000-3 1000w 3500l/h 37.5*21*26cm 7.7/8kg 1400pcs/CTN YSGP1200-3 1200w 3800l/h 37.5*21*26cm 8.1/8.4kg 1400pcs/CTN. 37.5*21*26cm/4pcs.
Sea water pump.
Hand pump A range of Deep well hand pumps, like India Mark II, India Mark III VLOM 65 & 50, U3 Modified Deep well hand pump, Afridev Deep Well hand pumps and the Extra deep well version of India Mark II deep well hand pumps along with spare parts and tool kits for maintenance of pumps. The IM II family of pumps are being manufactured as per the required Bureau of Indian Standards that is IS15500:2004, where as the U3 modified and Afridev hand pumps are being manufactured as per SKAT, Switzerland specifications.
We have 200w, 250w, 350w, 400w, 550w, 750w.Max.Height:5-8m, max.Flow rate:5500-12000l/h, max. Depth:5-7m 42x30x32cm/4pcs, 18.0/19.0
Sop caliber: ª¦80mm; Water exceeding caliger: ª¦65mm; Maxinmum torque: 22hp/3600rpmú+ Way of starting : electric start At rated pressure: 1400l/min/0.95map; Priming time : ín20s; Sucation head max: 7m Dry Weight: í_92kg; Overall dimension[mm(in)](Lí-Wí-H): 650í-610í-650mm
Water pump Power: 0.75kw, 1hp
3s series water injection pump Maxfully offers single acting reciprocating triplex piston mud pump; high pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; skid mounted and truck mounted pumping units and pump parts. Api certified. The 3s series high-pressure reciprocating triplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required. It is designed and built for compactness, efficiency and long service life. Its systematical design with inlet and discharge connections on both sides offers great flexibility of string lay-out and ease of installation. According to individual requirement, the pump comes with different types of motors; standard motor, permissible motor, frequency modulation motor, or magnetic adjustable-speed motor. To meet with ever changing working parameters, we provide custom-made high-pressure pumps too. The 3s series pump consists of gearing part, driving part, hydraulic part and motor, and is installed on a metal base plate. With built-in pressure relief valve, pulsation dampener, pressure control and overload protection device, the pump is safe to operate and easy to maintain.
Maxfully offers Single acting reciprocating triplex piston mud pump; High pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; Skid mounted and truck mounted pumping units and pump parts. API certified. The 5S series high-pressure reciprocating quintuplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required. It is designed and built for compactness, efficiency and long service life. Its systematical design with inlet and discharge connections on both sides offers great flexibility of string lay-out and ease of installation. According to individual requirement, the pump comes with different types of motors; standard motor, permissible motor, frequency modulation motor, or magnetic adjustable-speed motor. To meet with ever changing working parameters, we provide custom-made high-pressure pumps too. The 5S series pump consists of gearing part, driving part, hydraulic part and motor, and is installed on a metal bass plate. With built-in pressure relief valve, pulsation dampener, pressure control and overload protection device, the pump is safe to operate and easy to maintain.
