Sop caliber: ª¦80mm;
Water exceeding caliger: ª¦65mm;
Maxinmum torque: 22hp/3600rpmú+
Way of starting : electric start
At rated pressure: 1400l/min/0.95map;
Priming time : ín20s;
Sucation head max: 7m
Maxfully offers single acting reciprocating triplex piston mud pump; high pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; skid mounted and truck mounted pumping units and pump parts.
Api certified.
The 3s series high-pressure reciprocating triplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required.
It is designed and built for compactness, efficiency and long service life. Its systematical design with inlet and discharge connections on both sides offers great flexibility of string lay-out and ease of installation.
According to individual requirement, the pump comes with different types of motors; standard motor, permissible motor, frequency modulation motor, or magnetic adjustable-speed motor. To meet with ever changing working parameters, we provide custom-made high-pressure pumps too.
The 3s series pump consists of gearing part, driving part, hydraulic part and motor, and is installed on a metal base plate. With built-in pressure relief valve, pulsation dampener, pressure control and overload protection device, the pump is safe to operate and easy to maintain.
Maxfully offers Single acting reciprocating triplex piston mud pump; High pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; Skid mounted and truck mounted pumping units and pump parts.
API certified.
The 5S series high-pressure reciprocating quintuplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required.
It is designed and built for compactness, efficiency and long service life. Its systematical design with inlet and discharge connections on both sides offers great flexibility of string lay-out and ease of installation.
According to individual requirement, the pump comes with different types of motors; standard motor, permissible motor, frequency modulation motor, or magnetic adjustable-speed motor. To meet with ever changing working parameters, we provide custom-made high-pressure pumps too.
The 5S series pump consists of gearing part, driving part, hydraulic part and motor, and is installed on a metal bass plate. With built-in pressure relief valve, pulsation dampener, pressure control and overload protection device, the pump is safe to operate and easy to maintain.
2166 Electric Pumps Suppliers
Short on time? Let Electric Pumps sellers contact you.
TONSON Pneumatic double diaphragm pump is designed for volatile and hazardous chemicals to be explosion-proof, absolutely safe, convenient, saving you time and money. It can be installed without power supply and fastness. The material includes aluminum alloy and stainless steel.
We have established the competitive product lines in pumps including FZB pumps,belt pulley gear pump,Centrifugal Pump,Sewage Pump,Chemical pump,Three-screw Pump,Jacket Bitumen Pump,Thermal oil pump,Thermal Conductive Pump ,stainless steel Rotor Pump,Fire Fight Pump,Multi-stage Pump,Oil Pump,Vacuum Pump,Magnetic Pump,W Hydro Ejectors,W vortex pumps,QJ Deep well pumps,Diesel Engine Pump,Diaphragm pumps,Control Panels,water supply,Valve,Barometric bottle,Seal Member and all kinds of pump sets.
If you have interesting for our pumps, please inform me your detail requirement, I will be more than happy to assist you. Hope we could cooperate successfully with mutual benefit and become longtime friends.
CQB-F Series Fluoroplastic magnet pump adopts the permanent magnet into centrifugal pump. The pump has the advantages such as fully sealed and no leakage and anticorrosion etc.
CQB-F Series Fluoroplastic magnet pump is made of PVF2. The material has the good anticorrosion and high mechanism intensity and no aging and no toxin distribution etc.
The pump uses the stationary seal to substitute the rotary seal. The flow passage parts are in full seal to insure no leakage. The pump has the compact structure and good appearance and low noise and small volume and steady operation etc.
The pump is widely used to transport acid and alkali and oil etc rare liquids and toxin and volatile liquids in chemical industry and pharmacy and electroplate and food and photo etc and water circulation system and filter system. It is especially for flammable and explosive and leaky liquids.
MP Series minitype magnet pump is fully sealed without mechanical seal. The magnetism material in shaft and impeller attract each other for coincidence. Torsion of motor is driven by active magnet and passive magnet to let impeller work. Ceramic bearing has very good wearable and anticorrosion performance.
The pump is widely used to transport acid and alkali and oil and rare liquids and toxin and volatile liquids in chemical industry, pharmacy,petroleum, electroplate,food, photo etc and water circulation system and filter system. The pump without explosion proof motor is especially for flammable and explosive and leaky liquids.
The wet parts of this pump are made of full stainless steel material to perform outstanding corrosion resistance to organicacid,organic compound,alkali,neutral solution and a great many of gases. double helix carbon graphite bearing and hard alloy bearing are provided with good abrasion-resisting property to ensure the service life of product.It is an optimal pump for handling corrosive mediums without leakage.
CQ Series magnet pump is the new centrifugal pump used with magnetic coupling. The material of magnet pump has the stainless steel and reinforced polypropylene and engineering plastic etc. The pump has the advantages of reasonable design and entire seal and no leak and anticorrosion characteristic. The rotary seal replaces the stationary seal to insure no leak because the parts which contact with liquids are entirely sealed. Magnet pump is made of engineering plastic with anticorrosion and high strength and ceramic and stainless steel to insure good anticorrosion performance.
Magnet pump has single structure and good appearance and small volume and low noise and reliable operation. The pump is widely used to transport the acid and alkali and oil and toxin and volatile liquids in chemical industry, pharmacy, petroleum, electroplate and food, etc. It is very suitable for leaky and flammable and explosive liquids.
Zcq series self priming type magnet pump is the magnet pump with 4meter self priming height but it need not install foot valve and pour guide water. Rotary ring replaces stationary ring so that parts which contact with liquids are entirely sealed and no leak. Pump body and parts which contacts with liquids are stainless steel and ceramic and teflon etc material to insure the good anticorrosion performance
KF-O/1/2 SERIES PERIPHERIAL PUMP
KF-O0/1/2 series water pumps have peripheral type impeller. On the extremities of the extremities of the impeller there are several radial paddles of the impeller and the pump body.
This characteristic enable the pump obtaining a regular and not pulsating flow and high pressures with quite slopping curves.
Working conditions
Max Temperature of Fluid up to+80
Max pressure:10bar.
Max Ambient Temperature up to 40
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector inside.
Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft, etc, will be available upon request.
QB/PM SERIES PERIPHERIAL PUMP
QB/PM series are suitable for pumping clean water. They are particularly suitable for domestic applications as supply water from well, pool etc,It is also suitable for water pressure boosting,gardening and automatic water suppiying system if composed with other appliances.
Working conditions
Max Temperature of Fluid up to+80
Max pressure:10bar.
Max Ambient Temperature up to 40
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector inside.
Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft, etc, will be available upon request.
4SD4 Series Stainless Steel Submersible Pumps
For water supply from wells or reservoirs.
For domestic use, for civil and industrial applications, for garden use and irrigation.
Working conditions
Water temperature up to 55íµ.
Minimum internal diameter of well: 102mm
Maximum immersion depth: 40m
WRS Series Pipe Pume
These series are WRS pumps.The WRS pump is an air venting pump.It is equipped with an air vent tousing,suitable for using in conjnction with any commercially available automatic air went,vertical mouning of the air vent at any pump position.Motor overload protection is not required.The motor operates non-overloading.
These pumps are suitable for heating water to VDI 2035 and water/glycol mixtures up to a ration of 1:1,They are extremely reliable,economical and quiet to use,being particulary suitable for domestic applications such as central heating installations,industrial circulating systems,air conditioning and chilled water circulation systems,etc.
Working conditions
Fluid temperature rang:-10+110
Maximum ambient temperature:40
Manual 3-speed control
