Wind turbine generator we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality. S43/600KW Wind Generator Sets Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg (Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall (Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg (Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m (Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm (Tower: height 38.5or48.5m/weight 33000 or45800kg (Yaw system :type, active/yaw rate 0.2 S48/750KW Wind Generator Sets Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s (Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall (Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97 (Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm (Tower: height 65m/weight 75000kg different dimensions
Diesel and turbo generators We can provide diesel and turbo generators widely used for stationary and mobile. The diesel generator's capacity varies from 100kw to 2200kw per units. For the turbo generators, the capacity is of 6mw to 200mw. Diesel generator: Model 200gf, 250gf, 300gf and 350gf diesel generating set with capacity of 200kw to 350kw is composed of model n6160 stationary diesel engine, 3-phase synchronous generator and low-voltage control board. It is equipped with protective equipment against overload short-circuit and under-voltage. Diesel engine is coupled by flexible coupling with generator and they are mounted on the common base frame. It's very convenient to user, if the diesel generating set has been needed to install or move. 200kw and 250kw diesel generating set is an ideal emergency power source in small industrial area, enterprise, guesthouse, hospital and public area. Model 500gf diesel generating set with capacity of 500kw is composed of model 6300zd2 stationary diesel engine. Brushless synchronous generator and low-voltage control board, it is equipped with protective equipment against overload, short-circuit and over-voltage, and alarm system giving warning in the event of low lubrication pressure, over-temperature of cooling water and oil. Model 1000gf(1000kw) diesel generating set is composed of model g6300zd6 stationary diesel engine, brushless synchronous generator and high or low-voltage control board.
High o/p driers Specially designed for very high o/p at madium to moderately high hot air temperatures, optimum use of power&fuel.Stainless steel construction with carbon steel & aluminium.Hot air fan with aerofoil impeller.Pneumatic discharge/screw conveyor arrangement.Fully automatic process control system.Compatible with all types of hot air generators.
Switching power supply Switching mode power supply (smps) s-200 series (single) Low price and high reliability 105 output capacitor Ac input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the ac input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with emi filter, minimum wave. 1) switching power supply (smps) output: Dc voltage/rated current:5v/40a or12v/16.5a or15v/13.3a or24v/8.5a or27v/7.4a 2) switching power supply (smps) input: Voltage range: 85 ~ 132vac / 170 ~ 264vac selected by switch 248 ~ 370vdc Ac input frequency: 47 - 63hz Ac current:4.2a/115vac 2.2a/230vac Inrush current (max.):cold start 30a/115vac 60a/230vac Leakage current:
Switching Mode Power Supply (SMPS) S-60 Series (Single) Low price and high reliability 105f¦ output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with EMI filter, minimum wave. 1) Switching Power Supply (SMPS) Output: Dc voltage/Rated current:5V/12A or12V/5A or15V/4Aor 24V/2.5A 2) Switching Power Supply (SMPS) Input: Voltage range: 85 ~ 264VAC 120 ~ 370VDC AC input frequency: 47 - 63Hz AC current: 2A/115VAC 1A/230VAC Inrush current (max.):cold start 30A/115VAC 60A/230VAC Leakage current:
Switching power supply Switching Mode Power Supply (SMPS) S-40 Series (Single) Low price and high reliability 105 output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effectively With short-circuit and overload protection 100% full-load burning test Installed with EMI filter, minimum wave. 1) Switching Power Supply (SMPS) Output: Dc voltage/Rated current:5V/8A or12V/3.5A or15V/2.8Aor 24V/1.8A 2) Switching Power Supply (SMPS) Input: Voltage range: 85 ~ 264VAC 120 ~ 370VDC AC input frequency: 47 - 63Hz AC current: 1.2A/115VAC 0.6A/230VAC Inrush current (max.):cold start 15A/115VAC 30A/230VAC Leakage current:
Electronic KWH Energy Meter Single/three phase static energy meter single/ three phase prepaid static energy meter single/three phase multi-tariff static energy meter single/three phase tamper-proof static energy meter single/three phase wave carrier static energy meter single/three phase multi-function static energy meter single/three phase wireless multi-function static energy meterenergy distribution monitor. And the accuracy class is 0.5, 0.5s and 1.0. The voltage range is from 100v to 480v. And the current range is from 1.5a to 100a. It is packaged by box.
Applicable: access control, electric lock Description: Power supply: AC85~264V/50HZ Output:DC5V DC9V DC12V DC24V (optional) Power:40W Efficient:80% Noise:
Single-phase prepaid kWh meter Main Functions: 1.Both-way electric energy metering. Provides precise positive-negative active energy metering and one-way accumulating. Used for power metering and advance unchase of AC single-phase current rated. 2.Advance purchase quantity, preset maximum load-limit and IC card password. IC card transfers data and realizes data including total consumption, remaining quantity, accumulated quantity and total purchases etc.) backward reading. 3.Storage of leave-factory serial number, meter constants, initial data and the user's name and address etc.. 4.Alarm and switch off when overload. Alarm at low remaining power to remind user of timely purchasing. Main Characteristics: 1.High accuracy and import special metering chip. High accuracy, sensitivity and reliability, wide overload endurance, low power consumption, small volume and light in weight; easy installation, convenient auto-control and function expanding. 2.Long service life. With SMT technology and world famous, long-life components employed, its accuracy is not affected by frequency, temperature, voltage and higher order harmonics. Random installation location. No adjustment is needed if it leaves the factory as complete machine. Checkout period can be extended. Hence the workload of Watt-hour Meter testing and checking-out of electric departments is considerably reduced. Obviously better reliability than its similar. 3.Stable operation. Better stability for its wide range working voltage. 4.LED display, bright and clear prevent counter data from Losing at any times.
Single-phase prepayment kWh Meter Type: DDSY716 Name: Single-phase pre-payment electricity kilo watt-hour meters Accuracy: Class 1.0 Class 2.0 Power Consumption:
Diaphragm gas meter Description Model SY-RQM Diaphragm type gas meter applies to measure the consumption of coal gas, liquefied petrol gas and natural gas. It can also be used to measure the flow rate of are and other gases. Features New design, Exquisitely-made; High sensitivity, Accurate metering, Easily-installed and Maintained; quipped with anti-reverse facilities, Adopted advanced surface treatment, Corrosion-resistant, Long operation life, The shell is cast with aluminum-alloy, diaphragm structure. Big digital wheel equipped. The casings for SY-RQM-1.6 & SY-RQM-2.5 are identical
Testing equipment for 3-phase kwh meter Main technical indexes: 1.The accuracy class of the devices: Sy3582d-0.05 grade Sy3582c-0.1 grade 2.Output voltage: 57.7v, 100v, 220v, 380v Regulation range: 0-120% adjustable continuously Regulation step:
Single-phase prepaid kWh meter Type: DDSY716 Name: Single-phase pre-payment electricity kilo watt-hour meters Accuracy: Class 1.0 Class 2.0 Power Consumption:
2 x 1600KVA Generators for sale Type KTTA50G2
Gasoline generator Fuel tank capacity
DJ series gasoline engine generator, ohv design, efficiently and economical.Auto-decompression, easy start Reliable transistorized voltage regulator, Automatically stop the engine when engine oil level is low, prevent engine damage. Durable steel pipe frame surround all components, easy to transport and carry.Large fule tank for hours of continuous operation Fuel level and voltage indicating
Generators & copiers.
Model e hp series ( 10kva 500kva ) 3 phase i/p & 3phase o/p online ups e make input parameters nominal voltage 415 vac, 3 phase, 4 wire e.
Charge Station, Wireless Charger.
Ht/lt power, control & aerial bunch wires & cables.Manufacturer
