The integrated skid-mounted ozone generator system combines PLC,The integrated equipment of intelligent variable frequency pulse power supply and plate discharge body.The product optimizes the layout of equipment and pipelines, has small space requirements, high integration, and is easy to install.The skid-mounted ozone generator system is finalized and quantitatively produced in advance,With sufficient inventory and stable transportation channels, the delivery speed is fast and the lead time is short.
1) The large-scale ozone generator (1kg/h-150kg/h),
producing Typy:
*Cabinet type ozone generator,
*Container integrated ozone generator device
and supply for ozone systemic design and fix according to client requirement. We can often supply for skill service and training service and fitting for our customer.
2)large-scale ozone generator -oxygen supplier and PSA air source series.
3)Ozone generator technical parameters.
Pingshang Technology's precision chip resistor series focuses on the pursuit of quality, and Pingshang is better at serving mid-to-high-end products! We must have what others have, and we can have what others don't! Customized services to meet your different needs!
Detailed description of precision chip resistors
Series: 0805
Resistance: 0R 500M 0 22M full range
Power: 1/20W 1W
Deviation: D=±0.5%, B=±0.1%
Product features of precision chip resistors
1. Resistance error is ±0.5%, temperature coefficient is ±50ppm/
2. Small size and light weight;
3. Adapt to reflow soldering and wave soldering;
4. Stable electrical performance and high reliability;
5. The assembly cost is low, and it is matched with the automatic mounting equipment;
6. High mechanical strength and superior high frequency characteristics;
7. Comply with ROHS directive requirements.
Application areas include handheld products, computer products, industrial and medical instruments, etc.
Products Introduction
The power department did some tests to solve some problems. According to theories and test results at home and abroad, the 50KV Very Low Frequency high voltage generator withstand voltage test can solve this problem. Its advantages are that not only the test results are the same, but the instrument size is small and the weight is greatly reduced.
output rated voltage power fuse Refer to the following table
Features:
Extensible and non-extensible range
Flexible arrangements of functions, providing the exact solution
1 to 4 functions in a single SF6 - insulated stainless steel enclosure
Hermitically sealed stainless steel switching chamber
No on-site SF6 gas handling for installation Intuitive single-line mimic diagram
Vacuum interrupter technology for circuit breakers
Suitable for indoor and outdoor applications Circuit breaker protection using a wide range of self-powered and auxiliary relays
Motorisation for remote control
Easy integration with SCADA networks
Front access cable terminations, with DIN 400 Type C bushings
Cable earth & test facility
Applications:
Energy:
Generation: wind power, solar power
Distribution: compact substations, distribution networks
Infrastructure:
Tunnels, airports, ports, metro railway stations
Description:
Portable Medical Oxygen Molecular Sieve is high-efficiency oxygen molecular sieve of X-type molecular sieve(pore diameter:10 angstroms). It is suitable for household and medical oxygen generator with PSA. It has good selectivity of N2/O2. Easily desorption.
Power Transmission Steel Towers are used for electrical transmission and distribution. It is set up outdoor, including many types for 110-500 KV electricity transmission lines.
Transformer load box is also called current transformer load box, voltage transformer load box, PT load box and CT load box. Current, voltage transformer load box and transformer load box. When testing current and voltage transformers, PT/CT mutual inductance The load box provides a variety of effective loads and is an ideal accessory product for various transformer verification devices.
PRODUCT FEATURE:-
Rain Proof
100% Full load Built-in Test
Forced air cooling by Built-in DC ball bearing fan
1 year Warranty
LED Indicator for Power On
VLF high voltage generator 60KV.The capacity of it is 1/500 of traditional way. Greatly simplify testing procedures, That is why commonly used in the developed countries, china ministry of electric power entrust Wuhan high voltage research institute to drafting 35Kv and below XLPE insulated power cable ultra-low frequency (0.1Hz) voltage withstand test methods for promoting this approach. The instrument is developed according to China's made of this need. It can be widely used in cable, large-scale high-pressure rotary motor, power capacitors into AC voltage withstand test.
Power capacitance of single-core XLPE insulated cable (µF/km)
0.1Hz -60KV Ultra-Low Frequency High Voltage Generator
Model
Rated Voltages
Load capacity
Fuse
Weight
Useful
VLF-60
60kV
(peak )
0.1Hz, 0.5 µF
25A
Control 6
HV TANK-I30
HV TANK-II 33
25KV and below the cable Generator
0.05Hz, 1.0 µF
0.02Hz, 2.5 µF
0.01Hz, 5.0 µF
Precautions
1.Please use the STOP button and discharge by rod then shut down the power if you need to discontinue the machines which in the high pressure conditions.Otherwise it will damage the instrument!
2.Please operation it according to the screen instructions.
3.It is a normal phenomenon to see small amount of oil spill after boosting the pressure because the insulating oil in the booster is full, besides, it will not affect your use.
4.When carrying out 10KV cable test, one-phase test is strongly suggested. The voltage shall be 18KV and the frequency shall be 0.1Hz 0.05Hz 0.02Hz 0.01Hz. The manual said load capacity is the theoretical value, the scene 10KV cable length can reach 3-20km.
AC and DC dual purpose AC and DC withstand voltage tester. The winding is theconcentric pagoda and multilayer cylindrical type low-voltagewinding in inner high-voltage winding in outside; Outer cover is portable which has characteristics such as volume smallness weight light the shape prettiness and move convenience and so on.
xc control cabinet Technical Paramenters:
environment temperature 0-40
altitude < 100m
relative humidity < 85%
Main product specifications
type specification capacity power source output operating mode Refer to the weight
anthroposcopy (V) (A) (V) (A)
XC-2 2 1 220 50 0-220 10 manual operation 14
XC-3 3 1 220 50 0-220 15 manual operation 16
XC-5 5 1 220 50 0-220 20 manual operation 18
40KV vlf high voltage generator of this product fully complies with the standards of the electric power industry. Mechanical methods are widely used to modulate and demodulate ultra-low frequency signals, but there is no standard sine wave, some errors in high-voltage part measurement and spark discharge. The product can overcome the above shortcomings.
How to choose the suitable products for test
Please make sure that the capacitance of test products is below the instrument rated capacitance. The waveform will be influence if the capacitance of test products is too small and the instrument can not normally output when it below 0.05µF. 0.05µF capacitor in parallel to auxiliary output. Below is capacitance of some instrument for your reference.
40KV vlf high voltage generator parameter :
Model
Rated Voltages
Load capacity
Fuse
Weight
Useful
VLF-40
40kV
(peak )
0.1Hz,1.1µF
20A
Control 6
Body Boost 50
Used for cable and generator with corresponding voltage
The Portable single-phase electric meter Test Equipment is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the calibrator also can be used as one high precision standard power source, ac voltage source and current source.
Single-phase electric meter field calibrator is suitable to test various types single phase meters on site and can also be used to test alternating current parameters.
Feature
1. Current clamp and meter combined together, colorful and touch-screen display;
2. One AAA Li-battery can continuously working 4 hours;
3. Wide voltage, current measurement range, voltage range: 15-300V, current range: 0.05-120A;
4. Display all the measuring parameters in one screen;
5. Current clamp has automatic compensation function, 0.2% class accuracy;
6. Current clamp has automatic calibration function;
7. Integration design of the meter and clamp;
8. 16bit high accuracy AD switch 32 bit ARM processor core.
9. Automatically record and save 999 groups calibrate data;
10. Micro-multifunction optic sampler
Technical index
1. Manual/automatic test inductive single phase meters;
2. Manual/automatic test electric single phase meters;
3. Measure virtual value of alternating voltage (15~300Vrms);
4. Measure virtual value of alternating current (50mA~120Arms);
5. Test parameters: active power, phase angle of voltage and current, frequency and etc;
6. Automatic store testing data, and 999 group test results can be saved.
21481 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
