Especially developed for indication and supervision of
the single-phase circuit, replaces an analogical
voltmeter, reducing installation manpower and
optimizing the used one of spaces in the panel.
Ideal for protection of single-phase networks is
monitored and generally to own alarm superior and
inferior. Protection of the parameters of programming by
password.
Especially developed for indication and
supervision of the three-phase circuit, replaces
an analogical ammeter, reducing installation
manpower and optimizing the used one of
spaces in the panel.
Ideal for protection of three-phase networks is
monitored and generally to own alarm superior
and inferior. Protection of the parameters of
programming by password.
BJ195DCE DC Energy Meters are mainly used to
measure the energy consumption for different load
connected to it. DC energy consumption for the loads
like telecom BTS (Base Transceiver Stations), solar
panel and any applications need DC power parameter
monitor. The meter calculated energy data by
connecting appropriate shunts in the loads circuit. The
voltage drop across shunt is fed to DC energy meter
input terminals. The millivolts across shunts are
converted into current depending upon the shunt ratio
used in circuit.
The DC Energy Meter is a micro-controller based product that measures DC voltage and
currents, power, energy data and displays them on a 7-Segment five digital LED display
with auto scrolling. Blue Jay can set the parameters of DC energy meter from the
customer request.
As the world wide aim is necessary to reduce the power consumption and optimization the
use of available power/energy supplies. The application of smart energy meters are seen
as ideal solutions by providing monitoring the energy consumption in an accurate manner.
BLUE JAY DC current panel meters with a DC
signal conditioner board combine high accuracy with
high read rate and a wide range of isolated output
options for computer interface and control. Accuracy
is 99.99% of full scale ±1 counts
DC ammeter operation provides four full-scale
current ranges 5.00A with 25mA resolution. The
5.000 A range measures can connect current shunt to
expand the measure range.. All current and ranges
are factory calibrated, without recalibrating the meter.
External current shunts are fully supported. Scaling is 75 mV - 5A, more than 5A will set transformer ratio
from the front panel of the meter. The scalable readout is four full digits up to 9,999 counts. Shunt is
remotely located for direct sensing. This allows the current carrying wires to take a more direct path to the
batteries and alleviates the need to route them through the meter case.
Especially developed for indication and
supervision of the three-phase circuit, replaces
an analogical voltmeter, reducing installation
manpower and optimizing the used one of
spaces in the panel.
Ideal for protection of three-phase networks is
monitored and generally to own alarm superior
and inferior. Protection of the parameters of
programming by password.
21562 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
BLUE JAY DC energy meters with a DC signal conditioner board
combine high accuracy with high read rate and a wide range of
isolated output options for computer interface and control.
DC energy meter operation provides four full-scale current
ranges 5.00A with 25mA resolution. The 5.000 A range measures
can connect current shunt to expand the measure range. Voltage
ranges from 5V with 25 mV resolution to 600.0 V with 5V
resolution. All current and voltage ranges are factory calibrated,
without recalibrating the meter.
External current shunts are fully supported. Scaling is 75 mV - 5A, more than 5A will set transformer ratio
from the front panel of the meter. The scalable readout is four full digits up to 9,999 counts. Shunt is
remotely located for direct sensing. This allows the current carrying wires to take a more direct path to the
large current and alleviates the need to route them through the meter case.
BLUE JAY DC voltage panel meters with a DC
signal conditioner board combine high accuracy with
high read rate and a wide range of isolated output
options for computer interface and control. Accuracy
is 99.99% of full scale ±1 counts
DC voltmeter operation provides and six full-scale
voltage ranges from 200.00 mV with 10 mV resolution
to 600.0 V with 5V resolution. The 200.00 mV and
2.000 V ranges provide a high input impedance of 1
Gohm to minimize the load on the voltage signal. All voltage and ranges are factory calibrated, without
recalibrating the meter.BLUE JAY DC voltage panel meters with a DC
signal conditioner board combine high accuracy with
high read rate and a wide range of isolated output
options for computer interface and control. Accuracy
is 99.99% of full scale ±1 counts
DC voltmeter operation provides and six full-scale
voltage ranges from 200.00 mV with 10 mV resolution
to 600.0 V with 5V resolution. The 200.00 mV and
2.000 V ranges provide a high input impedance of 1
Gohm to minimize the load on the voltage signal. All voltage and ranges are factory calibrated, without
recalibrating the meter.
Especially developed for indication and
supervision of the single-phase circuit, replaces
an analogical ammeter, reducing installation
manpower and optimizing the used one of
spaces in the panel.
Ideal for protection of single-phase networks is
monitored and generally to own alarm superior
and inferior. Protection of the parameters of
programming by password.
Specifications
Current inputs (TRMS) Communication (Option)
CT primary 10 000 A Link RS485
CT secondary 1 and 5 A Type 2 ... 3 wires half duplex
Sampling Rate 2 per sec Protocol Modbus RTU mode
Resolution 0.001 to 1, depending on the range MODBUS speed 4800/9600bauds
Burden < 0.5VA, < 0.2VA in 20A Analog Outputs (Option)
Auxiliary power supply Number of outputs 1 channel
AC voltage DC/AC 85~265 ± 30 % Type Isolated
Frequency 50 / 60 Hz Range 0 / 4 ... 20 mA or 0-5V
Consumption < 10 VA Maximum current 30 mA
Front panel Alarm Outputs (Option)
Display Type Red LED Super Bright Display Number of relays 1 channel
Maximum Display 9999 Counts Type Passive nodes
Polarity Indication "-" is indicated for negative input(option) Weight
Case / Housing Material Approximate 250~400g
Installation Panel mounting Environment
Terminal Block Thermoplastic with Tin Plated Brass Terminal Calibration 27°C ± 5°C
Dielectric Strength Operation 0 to 50°C, RH < 70%
2.5 kV at 50Hz for 1 min Storage -10 to 60°C, RH < 70%
Intelligent temperature & humidity controller with
completed FUZZY algorithm provides very precise
of temperature monitor. FUZZY algorithm control
fan or heater to maintain sensible & latent capacity
follows temperature/humidity curve by
automatically.
Display unit can show environment temperature
and humidity as per configure by user. The user
also can adjust environment condition very easily.
Bently Nevada 3500/15 AC/DC POWER SUPPLY
The 3500/15 Power Supply is a half-height module and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one ortwo power supplies with any combinations of AC and DC. Either supply can power a fullrack
Offered in a wide variety of measurement range options, Bently Nevada 3300 XL Series of sensor systems are the best performing and longest lasting sensors available today. Featuring superior performance in a variety of harsh environments, our 3300XL series is the the result of over 50 years of transducer system engineering, which is why the Bently Nevada name is synonymous with best in class proximity sensor systems.
Features and Benefits
The industrys most extensive selection of machinery measurement parameters combined with software configuration for virtually all monitor options
Maximum reliability with extensive self-checking and fault tolerant design features
Rugged design that is fully compliant with the American Petroleum Institutes Standard API 670 and API 618 requirements, Canadian Standards Association (CSA), Factory Mutual (FM), GOST, ATEX, and CE requirements
Compatibility with a variety of locally or remotely mounted displays
Flexibility for configuration with various levels of redundancy, ranging from simplex modules to dual power supplies to redundant relay modules with wide ranging and flexible logical operator options for configuring complex relay logic as desired
An Ethernet port in the 3500/22M Rack Interface Module and a single network cable to communicate with GE's System 1® software, connecting condition monitoring and diagnostic software
Optional DNV and Class NK certifications for maritime applications, and communication gateway module to connect to plant control and automation systems
TV Functional Safety Certification that can be supplied for applications requiring up to Safety Integrity Level (SIL) 2, when the product is used as part of a safety instrumented system
What you care about
Quantity available: 1
Warranty: In excellent condition 12 months.
Lead time: 1-2 working days.
Terms of payment:T/T and Western Union.
NEW AND ORIGINAL FACTORY INDIVIDUAL INNER SEALED PACKAGE BOX AS PER PRODUCT SIZE
Related items number:
125720-01
125760-01
125768-01
125800-01
125840-01
126648-01
128229-01
133323-01
133396-01
135137-01
135473-01
135489-04
136188-02
136703-01
138708-01
146031-01
149992-01
Looking forward to your letter!
ROBO CYLINDER RCS-SM-I-100-H-300-M
ABB TAYLOR ELECTRONICS 6024BZ10300B PROCESSOR MODULE 6024BZ10300B-2513
ABB TAYLOR ELECTRONICS 6024BZ10300B PROCESSOR MODULE 6024BZ10300B-2500
Bently Nevada 3500/15 AC/DC POWER SUPPLY
The 3500/15 Power Supply is a half-height module and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one ortwo power supplies with any combinations of AC and DC. Either supply can power a fullrack
Offered in a wide variety of measurement range options, Bently Nevada 3300 XL Series of sensor systems are the best performing and longest lasting sensors available today. Featuring superior performance in a variety of harsh environments, our 3300XL series is the the result of over 50 years of transducer system engineering, which is why the Bently Nevada name is synonymous with best in class proximity sensor systems.
Features and Benefits
The industrys most extensive selection of machinery measurement parameters combined with software configuration for virtually all monitor options
Maximum reliability with extensive self-checking and fault tolerant design features
Rugged design that is fully compliant with the American Petroleum Institutes Standard API 670 and API 618 requirements, Canadian Standards Association (CSA), Factory Mutual (FM), GOST, ATEX, and CE requirements
Compatibility with a variety of locally or remotely mounted displays
Flexibility for configuration with various levels of redundancy, ranging from simplex modules to dual power supplies to redundant relay modules with wide ranging and flexible logical operator options for configuring complex relay logic as desired
An Ethernet port in the 3500/22M Rack Interface Module and a single network cable to communicate with GE's System 1® software, connecting condition monitoring and diagnostic software
Optional DNV and Class NK certifications for maritime applications, and communication gateway module to connect to plant control and automation systems
TV Functional Safety Certification that can be supplied for applications requiring up to Safety Integrity Level (SIL) 2, when the product is used as part of a safety instrumented system
What you care about
Quantity available: 1
Warranty: In excellent condition 12 months.
Lead time: 1-2 working days.
Terms of payment:T/T and Western Union.
NEW AND ORIGINAL FACTORY INDIVIDUAL INNER SEALED PACKAGE BOX AS PER PRODUCT SIZE
Related items number:
125720-01
125760-01
125768-01
125800-01
125840-01
126648-01
128229-01
133323-01
133396-01
135137-01
135473-01
135489-04
136188-02
136703-01
138708-01
146031-01
149992-01
Looking forward to your letter!
Electronet series ELMAG-200 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes.
Due to its simple and rigid design, the flow meter is an obstruction-less and maintenance-free instrument in place of conventional mechanical flow measuring devices. The use of 'Pulsed DC' technology offers highest ability and better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow.
A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range.
Electronet series ELMAG-2516 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. The use of 'Pulsed DC' technology offers highest ability & better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow.
Generators made by ABB
Output: 9500 kVA
Voltage: 11000 V
Frequency: 50 Hz
Rotation speed: 750 rpm
Number x 4
Made in 2016
Condition: New article
3 years warranty included
There is also a generator of 7125 kva.
VFP series intelligent three-phase variable-frequency power supply is a new generation with precise and steady ac voltage and frequency, which is developed and manufactured by china's domestic manufacture.
CFP series variable-frequency power source can be used as power supply ideally for high-precision equipment. Cfp series is widely used in special power supply environment for equipment imported for domestic use or export of domestically produced equipment.,
VFP series can simulate various power supply environment around the globe and it is ideal to provide test power supply for the domestic exported equipment.,
VFP series provides stable frequency, high voltage accuracy, fast response, good impact resistance, three-phase voltage self-balancing, and many other advantages.
Dear, Sir/Madam. We are company from Poland. In our efforts to arrange used generators from Europe, 50 to 800 KVA, diesel, gas. Seaport of charging is Gdynia Poland.
Please, feel free to contact us. We are waiting for details from our company to prepare an offer.
Eft/ burst testers with a built-in coupling/ decoupling network for single phase or three-phase mains supply line and a hv terminal to connect a capacitive coupling clamp. Its performance fully complies with iec 61000-4-4 standard.
Features
1) fully compliant with latest standards iec/ en 61000-4-4
2) user friendly 7 touch panel display
3) support multi-language & facilitate users
4) built-in environment self-test program
5) programmable operation
6) pre-programmed iec 61000-4-4 test settings
7) the highest pulse frequency is up to 1.2mhz
8) rs232 interface, pc control operation & printable test report
9) comfortable use and convenient operation
Technical data
A lightning surge generator is used to evaluate the performance of device subjected to high energy disturbances from the power line port and other signal line ports. Our surge generators simulate these disturbances for all the necessary voltage levels in accordance with iec/ en 61000-4-5. See the following for more details.
Features
1) fully compliant with latest standards iec/ en 61000-4-5
2) user friendly 7 touch panel display
3) support multi-language & facilitate users
4) built-in environment self-test program
5) programmable operation
6) pre-programmed iec/ en 61000-4-5 test settings
7) surge voltage, surge current monitoring
8) eut intelligent detection
9) built-in voltage, current probe
10) self-calibration function, self-check function
11) rs232/ usb port, pc control operation & printable test report
12) comfortable use and convenient operation
Technical data
1) model: sur s6
2) surge waveform: open-circuit voltage wave: 1.2/50î¼s
Short-circuit current wave: 8/20î¼s
3) open-circuit voltage: 0.2~ â± 6kv
4) short-circuit current: 0.1~â± 3ka
5) polarity: positive/ negative/ alternating
6) phase angle: 0~ 359â°synchronous, asynchronous, or automatic
7) effective output impedance: 2 (common mode 12)
8) coupling/ decoupling network: built-in, single-phase three-wire, 16a (customer specific on demand)
9) coupling mode: differential mode 18î¼f, common mode 9î¼f/ 10
10) count: 1~ 9999
11) interval: 10~ 9999s
12) power supply: ac 220v â±10% 50/ 60hz
13) ambient temperature: 15, ~35,
21562 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
