Find Verified Electric Power Suppliers, Manufacturers and Wholesalers

Power supply (AC/DC) AC 85-265V/DC 85-330V, DC18-90V (option)
Power Consumption:

Power supply (AC/DC) AC 85-265V/DC 85-330V
Power consumption:

Power supply (AC/DC) AC 85-265V / DC 85-330V
Power consumption:

FEATURES
Can measure all the electrical parameters
Four modules can choose
Can measure the harmonics
High accuracy 0.5s
PT,CT transformation ratio is settable

PARAMETERS
Electrical parameters
Power supply (AC/DC) AC85-265V / DC85-330V, DC18-90V (optional)
Power consumption:

FU2200B RJ45 digital power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200B with Ethernet port as photo shows here. Also two color of the shell can be choose, white or black.

FEATURES
True-RMS measuring parameters
ANSI and IEC 0.2 accuracy class
Power quality analysis
4 quadrant energy
2MB onboard memory, can be extended to 16M
Data logging
High-speed RS485, Ethernet port (option)
Measure individual harmonics from 2nd to 63st (option)
TOU, 4 Tariffs, 6 Seasons, 6 Schedules
Three years warranty
With PC management software; web browse data


APPLICATIONS
Metering of distribution feeders, transformers, generators, capacitor banks and motors
Medium and low voltage systems
Commercial, industrial, utility
Power quality analysis
Data logging
Monitoring system

PARAMETERS
Electrical parameters
Power Supply (AC/DC) AC85-400V / DC85-330V
Power consumption:

FU2200A Ethernet power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200A with Ethernet port as photo shows here.



FEATURES
True-RMS measuring parameters
ANSI and IEC 0.2 accuracy class
Power quality analysis
4 quadrant energy
2MB onboard memory, can be extended to 16M
Data logging
High-speed RS485, Ethernet port (option)
Measure individual harmonics from 2nd to 63st (option)
TOU, 4 Tariffs, 6 Seasons, 6 Schedules
Three years warranty
With PC management software; web browse data


APPLICATIONS
Metering of distribution feeders, transformers, generators, capacitor banks and motors
Medium and low voltage systems
Commercial, industrial, utility
Power quality analysis
Data logging
Monitoring system

Power Supply (AC/DC) AC85-400V / DC85-330V
Power consumption:

It can be applied to electric power dispatching center, relay protection department or relay protection in power plant. Its metric division class makes it suitable for petroleum, railways and the iron and steel industries also.
FEATURES
Simultaneously measuring three-phase voltages, current, power, frequency, power factor, phase, etc.
Display vector map for the use of user directly.
Horizontal liquid crystal big screen TFT displays all electric parameters;
The smallest current it can measure is 1 mA, 2 mA above can display vector diagram;
Small volume, light weight and the operation is simple, convenient;
DSP digital signal processing chip, wide measuring range, high accuracy, good stability;
It can store data; data can be using computer software to upload for management;
Range switches automatically, software for be calibrated.

FEATURES
Ultra-compact design, handheld, small size, light weight.
The usage of multi-channel power supply, AC power supply can also be rechargeable battery-powered machine.
High accuracy instrument, good stability and wide range of voltage monitoring 0-1200V, current 0-500A.
It can be divided into direct current clamp measurements and precision measurements.
It can measure three phase voltage, current, active power, reactive power, power factor, frequency, phase, etc.
Showing the AC waveform, vector diagram and determining the 3P3W connection errors.
It can measure harmonics ration from 2nd to 64th and the harmonic analysis.
The measured data can record, query and upload print.
Instrument calibration by using software to facilitate the correction instrument variation.

FUNCTIONS
Measuring energy consumption values: the precise timing measurements of electrical equipment for short-term energy consumption; energy resolution; milli-watts; time resolution; milli-second; they are difficult to available for common instrument of power. The functions are used by pumping, cranes, air conditioning and other equipment in a work cycle connected power consumption.
The value of the measurement process: it can be recorded and tested continuously of voltage, current, active power, reactive power and other electrical parameter values and curves in a dynamic process and graphically display.
To measure the instantaneous values - including the exchange parameters: U, I, P, Q, PF, phase angle, frequency, harmonics, etc.
Measuring harmonics: measure/display voltage and current waveforms and harmonic bar graph.
Calibrator meter: load calibration of various single phase and three phase energy meters.
Vector analysis: based on the voltage, current and phase error, display vector graphics.

FEATURES
3s statistical interval, continuously record 168h
Support multi-brand current transformer
Up to 32G data storage space
Record up to 461 power energy parameters simultaneously
Up to 10000 screenshots saved
Support periodic recording function
Up to 3.9M/s USB high-speed transfer
Recording wave

FUNCTIONS
Energy loss calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: simultaneously measure AC output power for power electronics systems.
Power wave data capture: GF438II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: GF438II capture 50/60 cycles (50/60Hz) of each event that is detected in all modes, without set-up
Automatic transient GF438II analyzers capture 200 kHz waveform data on all phases simultaneously up to 1000V.
Fully class-A compliant: GF438II analyzers conduct tests according to the stringent international IEC 61000-4-30 class-A standard.
Mains signaling: GF438II analyzer measure interference from ripple control signals at specific frequencies.
Troubleshoot: analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: with included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic trending: every measurement is always automatically recorded, without any set-up.
System-monitor: ten power quality parameters on one screen according to EN50160 power quality standard
Logger function: configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: with included analysis software.
Battery life: up to 5 hours operating time per charge on Li-ion battery pack.

FEATURES
Measure phase angle between two voltages, between two current or between voltage and current
Measure alternating voltage (U), alternating current (I), frequency (F), active power (P), reactive power (Q), power factor (PF) and so on.
Current signal is obtained by the clamp current transformer on line directly
Discern inductive circuit and capacitive circuit;
Directly read differential protection phase among every unit of CT
Can check connection of transformer
Measure two way voltage phase sequence
Can check whether the meter connection is right or not
Can evaluate the running speed of electric kWh meter
High resolution of current, so can be used as a leakage current meter

GF211 double clamp phase volt-ampere meter is a multi-functional portable instrument. It can measure not only alternating voltage, but also alternating current. Its important function is to measure phase angle between two voltages, between two current or between voltage and current. The current signal is obtained by the clamp current transformer without cutting off current wire. It can discern inductive circuit and capacitive circuit; can directly read differential protection phase among every unit of CT; can check connection of transformer; measure three way voltage phase sequence; can check whether the meter connection is right or not; can evaluate the running speed of electric kWh meter. It has high resolution of current, so can be used as a leakage current meter. It is an ideal choice for electric power bureau, factories, mine, petroleum -chemistry enterprises, metallurgy factories and so on.

Electrical parameters
Power voltage AC220V±10% or AC110V±10%, 50/60Hz±10%
Time measurement 0.1ms-999999.999s
AC current output
Phase current output (effective value) 3 x 0-30A
Maximum power output 260VA/phase
Maximum parallel current output (effective value) 0-90A
Long-term allowable working value of phase current
(effective value) >10A
Allowable working time of maximum current >11s
Accuracy class

PARAMETERS
Electrical parameters
Power voltage AC220V±10% or AC110V±10%, 50/60Hz±10%
Time measurement 0.1ms-999999.999s
AC current output
Phase current output (effective value) 3 x 0-30A
Maximum power output 260VA/phase
Maximum parallel current output (effective value) 0-90A
Long-term allowable working value of phase current
(effective value) >10A
Allowable working time of maximum current >11s
Accuracy class

Shandongsenyuan new energy technology co., LTD., SYNE founded in 1998, is a leading manufacturer of power generation solutions in China. We specialize in the design, sale, installation, maintenance and service of gas power stations produced by natural gas, methane, diesel, biomass gas, petroleum associated gas, coal gas, landfill and sewage treatment. And provide project consultation, system design, technical support and other services; www.sy-ne.com
Our products:
Farm power generation, diesel power generation, natural gas power generation, heavy oil power generation, garbage power generation
garbage power generation project design, the contractor and operation;
100Kw - 3000Kw generator set, etc.

Shandongsenyuan new energy technology co., LTD., SYNE founded in 1998, is a leading manufacturer of power generation solutions in China. We specialize in the design, sale, installation, maintenance and service of gas power stations produced by natural gas, methane, diesel, biomass gas, petroleum associated gas, coal gas, landfill and sewage treatment. And provide project consultation, system design, technical support and other services; www.sy-ne.com
Our products:
Farm power generation, diesel power generation, natural gas power generation, heavy oil power generation, garbage power generation
garbage power generation project design, the contractor and operation;
100Kw - 3000Kw generator set, etc.

ï¼?SYNEï¼?ï¼?Shandongsenyuan new energy technology co., LTD., founded in 1998, is a leading manufacturer of power generation solutions in China. We specialize in the design, sale, installation, maintenance and service of gas power stations produced by natural gas, methane, diesel, biomass gas, petroleum associated gas, coal gas, landfill and sewage treatment. And provide project consultation, system design, technical support and other services;
Our products:
Farm power generation, diesel power generation, natural gas power generation, heavy oil power generation, garbage power generation
garbage power generation project design, the contractor and operation;
100Kw - 3000Kw generator set, etc.

50w constant voltage led transformer

Generator capacitors Details Our company specializes in export run capacitor Basic Information: product: Generator capacitors Design Style: High Cylindrical Inner Core: one core Core material: Aluminum foil Capacitor connection type: two cables (Double lead), Sealing material: PO oil Outer.

Power of Lamp 4*1000W Generator Power 6KW
Elevation Height 700CM By Hand-operated Working Time 42-45H
Anti-wind Capacity less than 6-G Frequency 60HZ
Engine Brand KIPOR Power Rating 6KVA
Luminous Flux 440000LM Insulation Grade H
Generator Brand SENCI Model Number FHZM-T
Model Number FHZM-T SHIPPING SIZE 408*160*175CM

-