This series of power supplies generate high voltage AC square wave output at variable amplitude & frequency and mainly find application in plasma research. These units are housed in compact 19 racks.
This series of power supplies incorporate the high frequency switch mode technology to give precision regulated & highly stable rack mountable units with current range up to 600A catering to a wide variety of scientific and industrial applications.
This series of power supplies can generate output that ranges from 1kV to 100kV, 50W to 20kW and are housed in compact MS cabinets to give a highly regulated output
Permanent magnet generator, wind alternator, low speed alternator.
Transformers, generators, large and small gas and furnace oil turbines, lighting system equipment and supplies, lightning and grounding systems or power plants, switch yards and substations, electrical rooms and battery systems.
1:1 Replacement for Pulse Current Inductors 1:200 L*W*H:17.2*9.53*20.4 PIN:12.7 l:94.5mH Min DCR:4.5OHM Max Hi-pot:2750AC 6' 1mA
We are all types of supplies. specially rice, halal gelatin, chemical, telco equipment, non telco equipment, solar solutions along with equipment, alternative power solutions, genset, sound proof canopies, in door/out door cable trays, switch gears, distribution box (db's) tower (stand alone & guy mast), packaging material.All types of trading & supply chain services.
Plastic housing made of PP, POM or PA, rust free for water flow. Vertical or horizontal installation, easy to set up for different applications. Sensitive start up volume setting and accurate to measure volume. Features of plastic water flow switch Multiple mounting options: can be mounted vertically or horizontally. Different connecting options: barbed connector or threaded connector with different sizes. Wide range of application with working temperature up to 100â??. For more information about pvc pipe flow switch and buy position sensor, please feel free to contact us!
Use and scope of application This standard conforms to GB/T12173-2008 "General Electrical equipment for mining", JB 8739-2015 "Flameproof high voltage distribution device for mining", GB3836.1-2010 "Explosive environment Part 1: General requirements for equipment", GB3836.3-2010 "Explosive environment Part 3: Developed by the relevant requirements of the increased safety type "E" protected equipment "and other standards, the technical parameters and requirements of this standard are more specific, detailed and more operational. This standard specifies the type specifications, requirements, test methods, inspection rules, marking, packaging, transportation and storage of GKG mining general high voltage switchgear. This standard is applicable to GKG type general high voltage switch cabinet used in coal mine without gas, coal dust explosion danger places and other similar underground industrial production departments such as non-coal mine mountains. Manufacture and inspection of (hereinafter referred to as switchgear). Normative reference document The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendment orders) applies to this document. GB 3636.1-2010 Explosive atmospheres - Part 1: General requirements for equipment GB 3836.3-2010 Explosive atmospheres - Part 3: Equipment protected by increased safety type "E" GB/T11022-2011 Common technical requirements for high voltage switchgear and control equipment standards GB1984-2003 High voltage AC vacuum circuit breaker GB 4208â??2008 Enclosure protection Class (IP code) GB/T 12173-2008 General electrical equipment for mining GB/T 156â??2007 Standard voltage GB/T 191â??2008 Pictorial signs for packaging storage and transportation GB/T 2423.4-2008 Environmental testing for electrical and electronic products -- Part 2: Test methods -- Test DB: Alternating humid heat (12H+12H cycle) JB-2015 flameproof high voltage distribution devices for mining AQ1043-2007 Safety marks for mining products GB3906-2006 3.6KV~40.5KV Ac metal enclosed switchgear and control equipment
This product is suitable for 10~500kV substations, power plants, high-rise buildings, residential areas and other distribution rooms, as well as small self-owned power plants, as high voltage switches, relay protection, automatic devices and other operations, control power supply and emergency lighting power supply. It can also be used in other places that require DC current power supply. This product conforms to the technical requirements of ZBK45017-90 "General Technical Conditions for DC panel for power network system", DL/T459-200 < Technical conditions for ordering DC Power panel (cabinet) "and LS(W)30-40JT < Technical Conditions for microcomputer Control DC Power Cabinet" and other standards, and the product quality reaches the domestic leading level. The charging device of this product can use high-frequency charging module and phased charging machine. The controller of this product can be PLC control type and single chip microcomputer type.
2.4kWh-2kW Portable Power Supply Portable charging station is fashion and convenient to carry. This outdoor portable power generator, portable electricity generator can support power supply for many home appliances for emergency situation and can also meet the electricity demand of various outdoor operations and automobile tour. The ece energy's power bank equipped with large capacity battery and quick charging function, to help you ensure the normal operation of various electrical appliances in case of unexpected power failure. 2.4KWh-2KW Portable Power Station Detail AC Fast Charging Using EVE A grade lithium iron phosphate battery cells from ece solar, the cycle life is up to 4000+, the discharge performance is good, and it can be used in low temperature environments. Built-in LifePO4 battery It has multiple functional interfaces such as USB, AC, and DC, which can meet a variety of electrical application scenarios. Supports Fast Charging Supports fast charging with AC power adapter, fully charged in 5 hours, saving charging time. BMS Built in smart BMS and pure sine wave inverter, with high and low temperature protection, short circuit protection, overcurrent protection, overcharge and overdischarge protection functions 2.4KWh-2KW Portable Power Station Specification As a portable power supplier, we will do our best to meet all the needs of customers. If you want to know more types of solar off grid batteries, please visit our website.
Very good Condition, CATERPILLAR 3512B GENERATOR SET YEAR-2012,KW-1424,RPM-1800,Running Hours-1354 hrs Only. #cat #caterpillar #marine #marineengine #generator #engine #generators #gensets Very Good condition Caterpillar Very low Running Hours 1354 , Year 2012 Radiator Cooled set is available for sale. Engine Make:Caterpillar Type:3512B KW:1424 KVA:1700 RPM:1800 Volt: 450 Hz: 60hz Year:2012 ECM SOFTWARE Above Good Running CAT Generator has been Removed from ship. Condition is Excellent... Engine with Alternator on Common base Frame. This is Exclusive in the Stock of Euro Marine. More Photos Available on Request.
Generator
Generator, electric component.
Used generator, electric motor.
Diesel generator & alternator.
Custom 150w Outdoor Home Portable Lithium Battery Rechargeable Power Station And Solar Panel Emergency Portable Power Station Support devices Drone Laptop Camera PC Cooker Function Quick Charge Support, Solar Panel Charge, LED Display Type Fast Charging, High Capacity, PORTABLE, Power Staion, LED Display, 2 in 1 quick charger power bank, for outdoor Warranty 3-5 YEARS Weight 1.23Kg Dimension 206 * 120 *50.5mm Socket Standard Universal Protection Over-discharging, Short Circuit Protection, Over-charging, Low Tension, Other Material aluminium Alloy+PC (Top and Bottom)+ABS(Middle Frame)
Voltage stabilizer, generator, transformer, UPS, DC power supply.FOB
Electrical Power Tools And Mannual Tile Cutter.
This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) Type 2 (Female) Cable permits Single phase 32Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power
