PCUG - Series: Ultrasonic generator with digital current display and pulse sweep frequency adjustment for industrial cleaning and biodiesel production application. It can directly connect with our "PCUI" immersion transducers pack to form a power cleaning system OR biodiesel reactor to form biodiesel production system General Specification : Input: 120Vac / 220Vac, 50 / 60Hz Output Power: 600W, 900W, 1000, 1200W, 1500W, 1800W Output Frequency: 10KHz to 133KHz Pulse Sweep Frequency : 0 ~ 20Hz Feature : 1) Power Level Control 2) Pulse sweep frequency adjustment to improve cleaning effect. 3) Current Overload protection. 4) Thermal Overload protection. 5) Current indication. 6) Robust design and can be 24 hours continuously operation.
PCB type Ultrasonic cleaning generator can be used with ultrasonic transducers to make a perfect ultrasonic cleaning.It is more compact, economic and space save design to fit both light duty and heavy duty cleaning system. It is very durable and can be continuously used for mass production even 24 hours operation. The generator can provide a timing feature, power adjustment, and sweep frequency feature.
Pwug: ultrasonic welding generator Digital time setting ultrasonic welding generator can be used for plastic welding application. It is so simple and easy connection between generator and transducers. The output power can be 1000w, 1500w, 2200w, 2600w, 3200w and 4200w. The general operating frequency are 15khz and 20khz.
Electric meter The main functions and features : 1. Energy measurement ways: total single-phase power meritorious =positive meritorious + reverse meritorious. 2. Right through infrared interface programming meter settings and copied sheet data to support meter reading with shrinking table, table factory default is bar code numbers. 3. After the blackout enter low-power work, in the blackout shows that the current state of total consumption, continuous 24-hour blackout revealed about the closure. 4. Meter procedural device to prevent the failure caused flight function, and after the failure to stop measurement. Main technical parameters Reference voltage 220v Voltage reference 0.7 u un .2 b -1 Current specifications 10-40a Reference frequency 50hz Grading accuracy ++ level Starting current 0.4% ib Voltage power lines "2w Communication transmission distance 5 meters Environmental conditions -25fªf+55fª Relative humidity 25f+95+¦ Automatic relay depth Data transmission speed Center frequency Dimensions 150 * 122 * 56.5
Duct hot air generator
Powered by:zh60(2.0hp) Votage:230v Rate output:650w Surge output:750w Frequence:50hz Dc:12v-8.3a Dimension:380x315x325 0, 04cbm
Model KDE6500T3 Frequency Output power (kVA) 5.5 6.3 Max. power (kVA) 6 7 Voltage (V) 230/400 240/416 Current (A) 7.9 8.7 Engine speed (r/min) 3000 3600 Phase 3-phase Power factor 0.8(delay) Excitation system Self-excited constant voltage (AVR) Noise level£íº7m£©dB£íºA£© 72 Fuel tank capacity(L) 15 Structure silent Panel Ordinary Output socket One single-phase, and one 3-phase Output terminal post No DC12V output Terminal post Net weight (kg) 170 Dimension (L*W*H) (mm) 970X558X768 Engine model KA186FA Engine type Single-cylinder, vertical, four-stroke, air-cooled, direct injection Bore * stroke (mm) 86X72 Displacement (L) 0.418 Power (kW) 5.7/3000 6.3/3600 Fuel consumption rate(g.kW/h) 275.1 281.5 Compression ratio 19 Lubrication system Pressure splash Type Engine starting system Electric starter Diesel oil model Summer:0#, Winter:-10# Lube oil model SAE10W-30 (above CD grade) Lube oil capacity (L) 1.65 Battery capacity (V-AH) 12V-36Ah 970*558*768
Model Kde6500ew Frequency (hz) 50 60 Output power (kva) 2 2.2 Voltage (v) 230 240 Current (a) 8.7 9.2 No-load welding voltage (v) 65 Rated welding voltage v 26-30 Rated welding dc a 200 Current adjusting extension a 50-200 Electric welding load rate 50% Speed (r/min) 3000 3600 Phase Single phase Power factor 1 Excitation system Self-excited constant voltage (avr) Noise level£íº7m£©db£íºa£© 77 Fuel tank capacity (l) 12.5 Structure Open frame Panel Ordinary Output socket Two Output terminal post Two Net weight (kg) 105 Dimension (l*w*h) (mm) 760x515x710 Engine model Ka186fa Engine type Single-cylinder, vertical, four-stroke, air-cooled, direct injection Bore * stroke(mm) 86x72 Displacement (l) 0.418 Power (kw) 5.7/3000 6.3/3600 Fuel consumption rate(g.Kw/h) 275.1 281.5 Compression ratio 19 Lubrication system Pressure splash type Engine starting system Recoil starter ¡¢ electric starter Diesel oil model Summer:0#, winter:-10# Lube oil model Sae10w-30 (above cd grade) Lube oil capacity (l) 1.65 Battery capacity(v-ah) 12v-36ah 760x515x710
Generator
Jaundice meter Features: Measure with no wounds, no pain, no infection; Small exterior, easy to be hold; Big lcd three digital display, easy to check the measure data(stb); Battery copacity indicator in lcd. Specifications: Measurement methods: light reflecting Measure data display: three digital lcd display(mg/dl) Startup time: >5s Accuracy: (0.0-15)+-1;(16-25)+-1.5 Product size: 182*57*31mm Net weight:200g (include batteries pack)
Voltage indicator We are a leader in the design and manufacture of epoxy components for the electrical power equipment industry. We do business with the philosophy that our most important product is customer satisfaction. We are now the supplier of italian vei(xiamen), areva(xiamen), etc. Specializing in manufacture of epoxy resin insulators, we have lots of kinds of insulators from 145kv to 7.2kv, such as spouts, bushings, post insulators, capacitive insulators, voltage indictors, and such special advanced components as applied on c-gis, sis, embedded poles, sf6 airproof system, etc., featured as compact design, high reliability, electric field equilibrium, for outdoor and indoor application. We has built up extensive expertise in material control, casting technology , testing ways and application data in apg ( automatic pressure gelation ) field. Also we welcome the oem business, and would like to tailor your special need all through mould design to casting. 1
Items with details. 1.Dual dc regulated power supply:- Product name : " power supply, digital (variable) 30-0-30 volts " Product code : " el-193" Description : Variable dual output Dual Display DC Power Supply Digital 30-0- 30V @2A Technical Specification : Output Voltage : 30-0- 30V @ 2A Output Current :0-2A Input Voltage: 110V, 60Hz. (Or 220V, 50Hz.) Constant voltage/ Constant Current Voltage and Current adjustment Power effect: CV
Cv-12030c Protections: short circuit/overload/over voltage/over temperature Protection standard: ip67 Certificate: ce, rohs 1 year warranty Specifications: Input voltage: 170-250v Output voltage: 12vía0.5v The sum output current: 2.5a Max output power: 30w Operating temperature: -40 to 80ípc Storage temperature: -25 to 45ípc Housing materialú¦aluminum Features: 1. High efficiency - with perfect protection circuit, the mains is of high reliability. The switching mains adopting pwm control mode is one of the best led mains. 2. Abnormality protection function - the mains has built-in over current and short-circuits protection. In case of short-circuits or overload, the product will conduct automatic protection. 3. Our products consist of indoor type and outdoor type Short circuit protection Auto recovery Overload protection 20% exceed is allowing Over-voltage protection ín255v Thermal protection ín80íµ Size for one piece: 200x30x20mm Cross weight for one piece: 260g Packing: 50pcs/carton Carton size: 34*24*19cm
CV-12060C Protections: Short circuit/Overload/Over Voltage/Over Temperature Protection standard: IP67 Certificate: CE, ROHS 1 year warranty Specifications: Input voltage: 170-250V Output voltage: 12Ví+0.5V The sum output current: 5A Max output power: 60W Operating Temperature: -40 to 80ípC Storage Temperature: -25 to 45ípC Housing Materialú¦Aluminum Features: 1. High efficiency - With perfect protection circuit, the mains is of high reliability. The switching mains adopting PWM control mode is one of the best LED mains. 2. Abnormality protection function - The mains has built-in over current and short-circuits protection. In case of short-circuits or overload, the product will conduct automatic protection. 3. Our products consist of indoor type and outdoor type Short Circuit Protection Auto recovery Overload Protection 20% exceed is allowing Over-voltage Protection í_255V Thermal Protection í_80íµ Size for one piece: 175x67x50mm Weight for one piece: 850g Packing: 24pcs/carton Carton size: 39.4*25.4*24.5cm
AC volt meter 96*96MM
Dc voltage/Rated current:5V/12A and12V/5A or5V/6A and24V/4A
Just the IPS machine we will deliver. If required, Battery also could be delivered with IPS machine. 16" X 16" X 7" for IPS
Rated power:3kw; frequency 50/60hz; power factor 1. 0; single crock, force air-cooled four-stroke, top-installed gasoline engine Net weight:43(kg) Packing dimension:600 íß 435 íß 445 (mm3)
Signal generator
Control panels
