YE800 Mobile electric dosing metering oil system YE800 Technical data: Oil control gun:1pcs Electric pump:220VAC,50HZ Flow rate:10-18LPM(Liter/Min) Preset scope:1-999.9L Accuracy: 1%; High pressure oil hose:4M Its very suitable for factory working line ,workstations and it can preset liters which you want to dispens automatic.
ANEVT(F) series high-precision bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range; compared with conventional bidirectional power supply, it can achieve full range of high-precision output from 0V to full scale, up to 2000V, and the maximum power of a single machine can reach 1MW; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Applications: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
ANEVT(F) series dual-channel bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response; two channels independently configured and not affect each other, which can be used in parallel to expand the DC output capacity and reduce investment by customer; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Features: Independent channel configuration: each channel is independently programmed, voltage, current and power parameters are set independently, and the operating parameters in programming mode are set independently. The channels are independent of each other and do not affect each other. Parallel channels: The two channels do not affect each other, and can be used in parallel. Grid feedback: both power supply and load characteristics, achieving the function of load for automatic energy feedback to the grid in addition to high-power DC power supply performance; energy saving, green and environment protection. High-precision output: accuracy of output voltage: �±0.05% F.S. Fast dynamic response: output voltage response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms; +90%~-90% forward/reverse switching time: â?¤10ms. Mainstream high-frequency PWM rectification control, power factor â?¥0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid. Advanced IGBT parallel technology, efficient and reliable. CC, CV, CP modes. Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection. Built-in EMI filter to filter the interference signal caused by the high-frequency switching process. Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer. Programmable slow-rise output. Application: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
The ANEVH series is a programmable DC power supply that integrates DC power supply and feedback load, which can be used as a source and output power; or used as load to realize sink function, absorbing power and returning to the grid cleanly; standard dual-quadrant operation. Built-in voltage curves for DIN40839, ISO-16750-2 and ISO21848 standard automotive grids. Comprehensive OTP, OVP, OCP, OPP protection. S terminal compensation Application: Micro-grid and micro-inverter testing Automotive motor, controller and power battery testing Fuel cell test, fuel cell DCDC test UPS, on-board charger (OBC), charging spot, bidirectional DC-DC test Industrial testing for electrolysis, electroplating, welding, etc. Testing of communication power supply, LED product Testing of automotive electronics, avionics High power test, DC feedback load demand application
This AN8721PV3(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, accurate and durable. Features: AC/DC universal wide-range, DC ~ 4kHz bandwidth, load adaptability; Reliable, stable, compact, light; High measurement speed, up to 0.25s refresh rate; Voltage/current ratio setting, easy expansion; Voltage, current, power over-limit sound and light alarm, quick identification of abnormal products; Standard RS-232 or RS-485 serial port, MODBUS communication, test automation; Optional digital I/O, remote input and alarm signal output. Applications: Strict industrial site type test; High temperature aging room test; Home appliances, commercial appliances line standby power measurement; Power tools test; Lighting test.
AN87500(F) multi-channel power analyzer is specially designed for multi-channel AC/DC power measurement, suitable for power measurement of most electrical appliances, power supplies, motors, inverters and other products. The product takes the high-speed DSP processor as the core, adopts 16-bit high-speed high-performance AD direct sampling method for data acquisition, and can realize multi-channel simultaneous measurement, covering: voltage, current, power, peak voltage, peak current, power factor, crest factor, frequency, electric energy, current integral, efficiency, harmonic content and 3-phase electrical parameters, with serial communication (RS232/RS485, GPIB), remote control, alarm parameter preset and so on, supporting 1P2W/1P3W/3P3W/3V3A/3P4W and other wiring methods, meeting testing requirements of various power supply. Features: Multi-channel: 1~6 channels, flexible configuration of 1~6 single-phase, three-phase three-wire Ã?? 2, three-phase four-wire Ã?? 2, four-phase (DC+ three-phase three-wire) and other modes, satisfy test requirements of varies load (air conditioner, converter, inverter, motor); High accuracy: high-speed DSP processor, 16-bit high-speed high-accuracy AD converter, accuracy up to 0.1%, 100ms display cycle; Wide power range: current up to 50A for a single channel (optional 20A, 10A, 5A, 2A, 1A etc. or combination), minimum 0.lmW power resolution, satisfy test requirements of standby power consumption and rated power; Broadband: AC/DC signals, power measurement bandwidth: DC, 0.5Hz~100kHz, satisfy power test requirements of varies standard and non-standard sine wave load; Multi harmonic analysis: simultaneous 6-channel harmonic analysis, maximum 50th harmonic measurement, distortion analysis, visual display of total harmonic contents and total contents; Multi frequency measurement: simultaneous 6-channel frequency measurement; Line filtering: 500Hz/5.5kHz low-pass filter to measure the fundamental PWM waveform, filter out the high-frequency interference of the switching power supply current; Sensor: variable ratio, common I-I/V-V voltage/current transformers; I-V type current sensor with BNC interface, maximum input voltage 10V, optional high current sensor; Efficiency calculation: measure the input/output energy consumption of the equipment at the same time, and calculate its efficiency; Accumulation of electric energy: positive electric energy, reverse electric energy and integrated electric energy can be separately accumulated to measure the trading electric energy; Threshold alarm: independent 10 groups of voltage, current, power, power factor and other thresholds and measurement threshold for each channel, automatic upper/lower limit judgment and alarm; Chinese/English interface: Chinese or English operation and time/date display.
This AN87310(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time, harmonics etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, professional and reliable. Features: Universal wide-range design for AC/DC, DC~100kHz bandwidth, stronger load adaptability Reliable, stable, compact, light Fast measurement, refresh rate up to 0.1s Standard RS-232 or RS-485 port, support MODBUS communication, automatic testing Application: Strict industrial site type test High temperature aging room test Power tool test Lighting test Standby power measurement of household appliances and commercial appliances lines Current: 1mA~22A/5mA~55A, voltage: 0.15~1200V, rated power and standby power can be measured Minimum power resolution: 0.1mW 50th harmonic and distortion analysis
The AN87330(F) series high-accuracy power analyzer adopts the latest FPGA+ARM digital processing system to achieve synchronous sampling, which fully meets the testing needs of three-phase equipment in the fields of motors, home appliances, new energy etc. on the market. It is specially designed for production links such as automated line and integrated system etc. Features: High performance, wide frequency band: accuracy up to 0.1%, the bandwidth is DC, 0.5Hz~100kHz, suitable for testing of non-sinusoidal wave load. True differential synchronous conditioning sampling, guaranteeing super large direct test capability, voltage: 0.15~1000V, current: 5mA~50A/1mA~20A. Optional motor torque and speed interface, suitable for testing of three-phase motor mechanical power and energy consumption. Standard RS232, LAN port, standard MODBUS protocol, to meet the customization needs of multiple protocols, optional RS485, GPIB module. Support three-phase interphase angle test. Applications: Dynamic test of brushless DC motor FG signal RMS, peak-peak measurement, duty cycle calculation, wave data analysis. Measurement of RMS and frequency of 3-phase back electromotive force. Phase angle test Power measurement of inverter motor and inverter Power bandwidth DC, 0.5Hz~100kHz Current: 0~20A/current sensor Simultaneously measure input and output power 50th harmonic and distortion analysis Testing of torque/speed of 3-phase motor Support the latest type of motor test module, reserved motor sensor test interface, suitable for signal test of most motor sensor on the market, 3-phase motor efficiency test by single machine, synchronized signal, improved test accuracy.
The AN97H series frequency conversion power supply adopts digital technology and IGBT intelligent output, pure output wave, with excellent technical performance. The power supply has an anti-shock circuit, suitable for various shock loads such as motors and air conditioners; excellent dynamic characteristics, strong load adaptation, high efficiency, simple operation, cost-efficient, suitable for industries such as export electrical appliances plants, laboratories, defense. Features: Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start.; Adjustable voltage and frequency during output status; Measurement: voltage, current, frequency, active power; Level of voltage: 1.0~150.0V, 150.1~300.0V automatically adjusted or locked to 1.0~300.0V; Line voltage drop compensation Shortcuts groups, power-off memory, shortcuts key; Lock key, user-friendly design to prevent mis-operation; HD VFD display; Standard RS232 port, optional RS485 port or remote control port.
The AN77 series intelligent variable frequency power supply adopts digital technology and IGBT intelligent output, pure output wave. The power supply can output constant current AC wave, which can be used for short circuit. It outputs constant large current under the condition of small voltage, which can be used for detection of low-voltage power distribution devices such as air circuit breakers, contactors, and transformers, design and production of transformers and inductance devices. It is an ideal tester for device manufacturers, quality inspection institutes, and certification centers for applications with high current test conditions and low energy waste caused by the consumption of the load. Features: Low-voltage, high-current AC output to meet the test requirements of relevant regulations; Output frequency of 45~65Hz, suitable for the test requirements of different grids and devices; Adjust current and frequency in output state; Measurement: voltage, current, frequency, active power; Power-off memory and shortcut keys; Key lock, humanization design to prevent mis-operation; Standard RS232 port, optional RS485 port or remote control port. Custom of current source of any voltage level and current. Applications: Replace traditional voltage/current regulation, precise control, convenient operation
The ANFP series programmable AC power supply adopts FPGA digital control, instantaneous waveform control and high-frequency pulse width modulation (SPWM) technologies. It has the advantages of fast response speed, high output accuracy, and superior waveform quality; it can withstand 3 times the rating Current impact capability, strong load adaptability; with multiple output modes and complex programmable functions, which can achieve test requirements such as ladder, step, gradual change, etc.; with three-phase unbalanced output mode, to achieve relevant regulatory tests or simulate special power grids And so on. It can be widely used in laboratories, quality inspection units, scientific research institutes and certification centers. Features: 1. Adopt FPGA digital technology, realize accuracy control and high quality sine wave output; 2.Advanced power management mode: three-phase standard mode, three-phase unbalanced mode (three-phase voltage can be adjusted independently, phase difference 0~359.9�° adjustable), three-phase independent mode (three-phase voltage, frequency, can be adjusted independently) Parallel single-phase mode (three-phase parallel, single-phase output); 3.Programmable step, stage, varations function, can realize relevant regulations; 4.Harmonic function,2-40 times superposition; 5.Operating in over current shock (up to 3 times of rated current)within 2s, start the impact load of 1/3 capacity of power supply directly; 6.Adjustable voltage and frequency during output status, frequency change without transit time; 7.Measurement: voltage, current, current peak, frequency, active power, apparent power, power factor, voltage peak factor; 8.Online monitoring: monitor IGBT temperature, transformer temperature, fan speed, input voltage and other parameters during output status; 9.Operating data recorders: keep the record of power supply status and alarm code automatically during alarming, save the maintenance time; 10.Fan speed will be adjustable automatically with the temperature of power supply to reduce the noise; 11.Lock key, user-friendly design, automatically locking without operation for 5 minutes to prevent from operation mistakes; 12. Combination cabinet, 8" large-screen color LCD; 13.Standard RS232, optional RS485, GPIB, Ethernet, analog control and other remote communication/control. Application: 1. Output mode management (standard three-phase output, separated three-phase output, parallel single-phase output) 2. Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start
The ANFS series AC power supply adopts FPGA digital control, instantaneous waveform control and high-frequency pulse width modulation (SPWM) technologies. It has the advantages of fast response speed, high output accuracy, and superior waveform quality; it can withstand 3 times the rated current impact , a variety of output modes, which can achieve "one machine with multiple functions" to meet the needs of customers for flexible use; it adopts 8-inch color LCD with exquisite and high-grade appearance, and digital keys make the operation more convenient. Mainly used in applications such as home appliances, motors and production lines. It is one solution that meets the basic needs of traditional industries and a power supply alternative for equipment upgrades. It also provides laboratories, quality inspection units, scientific research institutes and other applications more flexible power configuration scheme. Features: 1. Adopt FPGA digital technology, realize accuracy control and high quality sine wave output; 2.Advanced power output mode management: standard three-phase output, separated three-phase output (three-phase voltage and frequency adjusted independently), parallel single-phase output (three phase parallel, single-phase output) to achieve multi-function; 3.Operating in over current shock (up to 3 times of rated current)within 2s, start the impact load of 1/3 capacity of power supply directly; 4.Adjustable voltage and frequency during output status, frequency change without transit time; 5.Measurement: voltage, current, current peak, frequency, active power, apparent power, power factor, voltage peak factor; 6.Online monitoring: monitor IGBT temperature, transformer temperature, fan speed, input voltage and other parameters during output status; 7.Operating data recorders: keep the record of power supply status and alarm code automatically during alarming, save the maintenance time; 8.Fan speed will be adjustable automatically with the temperature of power supply to reduce the noise; 9.Lock key, user-friendly design, automatically locking without operation for 5 minutes to prevent from operation mistakes; 10. 8-inch large-screen color LCD display, digital key operation; 11.Standard RS232, optional RS485, GPIB, Ethernet, analog control and other remote communication/control. Application: 1. Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start. 2. Output mode management (standard three-phase output, separated three-phase output, parallel single-phase output) 3. Large-size color LCD, digital key input, knob operation 4. PC control software
This ANFH series AC power supply adopts digital technology and IGBT intelligent output with pure output waveform. The power supply has the ability to withstand impact of 3 times the rated current, featuring strong load adaptability, suitable for various impact loads such as motors and air conditioners, with good dynamic characteristics. The power supply is designed suitable for 19 standard chassis, compact, and can be directly installed in a standard cabinet for various applications such as testing, system integration, production line, etc.; as well as 4.3 color LCD touch screen, convenient and intuitive, widely used in home appliance lines, labs, quality inspection institutes, certification centers etc. Features: 19â?? standard chassis, compact, can be installed in standard cabinet Withstand 3 times the rated current lasting for 2S, directly start impact load equivalent to 1/3 of the power Adjustment of voltage/frequency in output state Startup ramp-up and online ramp-up, and the ramp-up time can be set Measurements: voltage, current, frequency, active power Voltage level: 1.0~150.0V, 150.1~300.0V automatically adjustable or locked within 1.0~300.0V Line voltage drop compensation Multi shortcut groups, power-down memory and shortcut keys 4.3â?? color touch screen, convenient and intuitive Key lock and humanized design to avoid misoperation Operating data recorders: automatically record the power state when alarming and alarm code, etc Standard RS232 port, optional RS485/GPIB/Ethernet port or analog control Application: 1. Impact resistant: impact loads with 1/3 power can be directly started without soft start 2. Adjustment of voltage/frequency in output state 3. Start ramp up and online ramp up 4. 4.3 color touch screen, convenient and intuitive
The AN50(F) low-power series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong overcurrent capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: 350mm deep full range of standard chassis, suitable for system integration and portable applications. High frequency PWM and full-bridge conversion technology, with high efficiency. Strong current/power overload capacity, up to 110%. Exceptional output stability. Voltage drop compensation terminal for large current output. Complete protection to ensure normal operation of power supply unit and load security. LED segment display. Clear, convenient for operation. Serial/parallel output, convenient expansion. Powerful programmable features to meet various testing needs. Supports SCPI/MODBUS-RTU standard protocol.
The AN50 series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong overcurrent capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: Work mode: CV, CC; Use high frequency PWM and full-bridge convert technique to achieve high efficiency; High power density design, standard case, wide application; LCD display, convenient for operation; 10 setting and quick recall groups; Exceptional output stability. Source voltage effect
The AN51(F)low-power series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong over-current capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, chips and electronic components, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: Colorful LCD display, digital keys,Convenient and easy for operation. 350mm deep full range of standard chassis, suitable for system integration and portable applications. High frequency PWM and full-bridge conversion technology, with high efficiency. Strong current/power overload capacity, up to 100%. Exceptional output stability. Voltage drop compensation terminal for large current output. Complete protection to ensure normal operation of power supply unit and load security. Serial/parallel output, convenient expansion.
The AN53(F) series DC Testing Power adopts Active Power Factor Correction technology, high frequency LLC multi-resonant soft switching inverter technology, to achieve high power factor, fast dynamic response, low output ripple, high power density, and Constant Power (CP) wide range output. It has small size, light weight, low noise, high efficiency and easy operation etc. It can be used for manufacturing, testing and maintenance of electronic equipment such as aircraft and airborne equipment, radar and navigation etc, as well as industrial and mining enterprises, college laboratories, institutes and so on. Features: Wide range output up to 3 times of "matrix" power supply of same power; Active Power Factor Correction, full load power factor of more than 0.99; High frequency LLC multi-resonant inverter with efficiency up to 0.93; Industrial best transient response speed; Constant Voltage (CV), Constant Current (CC) and Constant Power (CP) output for multi applications; Powerful programmable function, flexible settings; Built-in precise voltage/current measurement, stable output; Lead drop compensation terminal for output lead at large current; Complete protection for normal operation of power supply unit and load security; High brightness color LCD display, beautiful, simple, intuitive; Supports parallel output, expanding power/current range; Standard host software.
ACACUS 30 KVA , 1500 RPM ,50/60 HZ , 76db silent canopy ATS OTOSK
Plug-in LED Power Supply / LED Driver  FEATURES  1. Independent power supply for constant voltage LED lamp 2. Plug-in input and mini DC socket / cable output 3. Class II protection against electric shock from direct and indirect contact 4. SELV output 5. No load power consumption no more than 0.3W 6. Auto restart after fault conditions removal 7. Open circuit,short circut and over load protection 8. Efficiency no less than 70%,AC230V,full load  STANDARDS  EN 61347-1  EN 61347-2-13  EN 55015  EN 61000-3-2  EN 61000-3-3  EN 61547
CC Version Leading/Trailing Edge Dimmable LED Power Supply / LED Driver  FEATURES  1. Independent dimmable power supply for constant current LED lamp 2. Special design screw terminal for field connection 3. Class II protection against electric shock from direct and indirect contact 4. Auto restart after fault conditions removal 5. Open circuit,short circut and over load protection 6. The output current of the power supply could be dimmed between 10%-100% by trailing edge or leading edge dimmers 7. Efficiency no less than 75%,AC230V,full load  STANDARDS  EN 61347-1  EN 61347-2-13  EN 55015  EN 61000-3-2  EN 61000-3-3  EN 61547
