Waterproof power supply is dustproof and waterproof grade IP67 (safe and dustproof, can work normally when immersed in water for 15 cm to 1 meter); high power factor; with multiple protections such as short circuit, overcurrent, and overload.
Industrial control power supply is designed using pulse width modulation (PWM) switching technology and adopts low-power circuit design to ensure the stability and high efficiency of the power supply. Industrial control power supply is widely used in mechanical equipment, industrial control equipment, and indoor series.
Industrial control power supply is designed using pulse width modulation (PWM) switching technology and adopts low-power circuit design to ensure the stability and high efficiency of the power supply. Industrial control power supply is widely used in mechanical equipment, industrial control equipment, and indoor series.
DDS5558 Single Phase Meter is a kind of new style single phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has minimum size, and also a new single phase two wire active energy meter. It has already passed the test of the international authority CE. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has white backlight source eight digits LCD monitors shows the active energy power consumption. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. Features: Bi-directional total active energy measurement 25mm standard DIN rail installation, complying with standard DIN En50022. Single pole width (Modules17.5mm), complying with standard DIN43880. Small modular size, DIN rail mounted. Easy installation to distribution boards, load center, miniature & etc. by identifying where energy is being used. Application: All power parameter measurements; Energy measurement and electrical fire monitor and control; Replacing the three-phase power meter, three-phase electricity transmitter; Transformers, generators, capacitors, and electric motors distributed detection; Medium and low-pressure systems; SCADA, EMS, DCS integrators.
DCM3366D series electronic DC energy meter is a new generation product produced by our company. It adopts a liquid crystal display and has an RS485 communication function for data exchange with a microcomputer. It is suitable for power measurement and energy metering of DC signal equipment such as batteries and solar panels. It can also be used in modern supply and distribution DC systems such as industrial and mining enterprises, civil buildings, and building automation. It is composed of a measurement unit, data processing unit, communication unit, display unit, etc., and has the functions of electric energy measurement, data processing, real-time monitoring, and LCD. The electric energy meter has the characteristics of high overload, high accuracy, low power consumption, automatic saving of power outage data, and long life. Rated voltage (Un): DC100V, DC300V, DC500V, DC1000V Rated current (Ib): 50A, 100A, 200A, 300A, 500A, etc. can be set (maximum measured value 4800.0000A), using an external 75mV shunt input Auxiliary power supply: power supply voltage, DC20Vï½?60V or AC85ï½?265V/DC85ï½?330V optional Working temperature range: -25â??ï½?60â?? Dielectric strength: Voltage/power supply/casing: 3.0kV/min Communication/power supply: 3.0kV/min Static electricity immunity: contact discharge 8 kV, gas discharge 15 kV Electrical fast burst immunity: 4kV Surge immunity: 2kV/4kV
This series of power supplies have been designed and developed for OEM application requiring continuous operation for NDT inspection in various fields. Non -destructive testing is extremely valuable for evaluation, troubleshooting, research, and quality control in science and industry. These compact high frequency units have to be connected to an X-Ray tube to generate X-Rays and are available in 3 models 125kV, 5mA; 160kV, 5mA and 220kV, 5mA. The high frequency output allows for lower kV per exposure and superior imaging for better evaluation.
This series of power supplies integrate DC power supply with pulsing components to give a compact unit for ease of operation. General applications include sputtering, electroplating, plasma research, etc.
This series of power supplies generate high voltage AC square wave output at variable amplitude & frequency and mainly find application in plasma research. These units are housed in compact 19 racks.
This series of power supplies incorporate the high frequency switch mode technology to give precision regulated & highly stable rack mountable units with current range up to 600A catering to a wide variety of scientific and industrial applications.
This series of power supplies can generate output that ranges from 1kV to 100kV, 50W to 20kW and are housed in compact MS cabinets to give a highly regulated output
Current transformers for electric meter ; split core current transformers; latching relays for energy meters ; shunt resistors.Transportation
Current transformer, voltage transformer, magnetic lacthing relay and other components for energy meter.
Power plant, generators, genset, power equipments.
Renewable energy related products.
Permanent magnet generator, wind alternator, low speed alternator.
Plastic housing made of PP, POM or PA, rust free for water flow. Vertical or horizontal installation, easy to set up for different applications. Sensitive start up volume setting and accurate to measure volume. Features of plastic water flow switch Multiple mounting options: can be mounted vertically or horizontally. Different connecting options: barbed connector or threaded connector with different sizes. Wide range of application with working temperature up to 100â??. For more information about pvc pipe flow switch and buy position sensor, please feel free to contact us!
Use and scope of application This standard conforms to GB/T12173-2008 "General Electrical equipment for mining", JB 8739-2015 "Flameproof high voltage distribution device for mining", GB3836.1-2010 "Explosive environment Part 1: General requirements for equipment", GB3836.3-2010 "Explosive environment Part 3: Developed by the relevant requirements of the increased safety type "E" protected equipment "and other standards, the technical parameters and requirements of this standard are more specific, detailed and more operational. This standard specifies the type specifications, requirements, test methods, inspection rules, marking, packaging, transportation and storage of GKG mining general high voltage switchgear. This standard is applicable to GKG type general high voltage switch cabinet used in coal mine without gas, coal dust explosion danger places and other similar underground industrial production departments such as non-coal mine mountains. Manufacture and inspection of (hereinafter referred to as switchgear). Normative reference document The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendment orders) applies to this document. GB 3636.1-2010 Explosive atmospheres - Part 1: General requirements for equipment GB 3836.3-2010 Explosive atmospheres - Part 3: Equipment protected by increased safety type "E" GB/T11022-2011 Common technical requirements for high voltage switchgear and control equipment standards GB1984-2003 High voltage AC vacuum circuit breaker GB 4208â??2008 Enclosure protection Class (IP code) GB/T 12173-2008 General electrical equipment for mining GB/T 156â??2007 Standard voltage GB/T 191â??2008 Pictorial signs for packaging storage and transportation GB/T 2423.4-2008 Environmental testing for electrical and electronic products -- Part 2: Test methods -- Test DB: Alternating humid heat (12H+12H cycle) JB-2015 flameproof high voltage distribution devices for mining AQ1043-2007 Safety marks for mining products GB3906-2006 3.6KV~40.5KV Ac metal enclosed switchgear and control equipment
This product is suitable for 10~500kV substations, power plants, high-rise buildings, residential areas and other distribution rooms, as well as small self-owned power plants, as high voltage switches, relay protection, automatic devices and other operations, control power supply and emergency lighting power supply. It can also be used in other places that require DC current power supply. This product conforms to the technical requirements of ZBK45017-90 "General Technical Conditions for DC panel for power network system", DL/T459-200 < Technical conditions for ordering DC Power panel (cabinet) "and LS(W)30-40JT < Technical Conditions for microcomputer Control DC Power Cabinet" and other standards, and the product quality reaches the domestic leading level. The charging device of this product can use high-frequency charging module and phased charging machine. The controller of this product can be PLC control type and single chip microcomputer type.
2.4kWh-2kW Portable Power Supply Portable charging station is fashion and convenient to carry. This outdoor portable power generator, portable electricity generator can support power supply for many home appliances for emergency situation and can also meet the electricity demand of various outdoor operations and automobile tour. The ece energy's power bank equipped with large capacity battery and quick charging function, to help you ensure the normal operation of various electrical appliances in case of unexpected power failure. 2.4KWh-2KW Portable Power Station Detail AC Fast Charging Using EVE A grade lithium iron phosphate battery cells from ece solar, the cycle life is up to 4000+, the discharge performance is good, and it can be used in low temperature environments. Built-in LifePO4 battery It has multiple functional interfaces such as USB, AC, and DC, which can meet a variety of electrical application scenarios. Supports Fast Charging Supports fast charging with AC power adapter, fully charged in 5 hours, saving charging time. BMS Built in smart BMS and pure sine wave inverter, with high and low temperature protection, short circuit protection, overcurrent protection, overcharge and overdischarge protection functions 2.4KWh-2KW Portable Power Station Specification As a portable power supplier, we will do our best to meet all the needs of customers. If you want to know more types of solar off grid batteries, please visit our website.
Very good Condition, CATERPILLAR 3512B GENERATOR SET YEAR-2012,KW-1424,RPM-1800,Running Hours-1354 hrs Only. #cat #caterpillar #marine #marineengine #generator #engine #generators #gensets Very Good condition Caterpillar Very low Running Hours 1354 , Year 2012 Radiator Cooled set is available for sale. Engine Make:Caterpillar Type:3512B KW:1424 KVA:1700 RPM:1800 Volt: 450 Hz: 60hz Year:2012 ECM SOFTWARE Above Good Running CAT Generator has been Removed from ship. Condition is Excellent... Engine with Alternator on Common base Frame. This is Exclusive in the Stock of Euro Marine. More Photos Available on Request.
