This AN87310(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time, harmonics etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, professional and reliable. Features: Universal wide-range design for AC/DC, DC~100kHz bandwidth, stronger load adaptability Reliable, stable, compact, light Fast measurement, refresh rate up to 0.1s Standard RS-232 or RS-485 port, support MODBUS communication, automatic testing Application: Strict industrial site type test High temperature aging room test Power tool test Lighting test Standby power measurement of household appliances and commercial appliances lines Current: 1mA~22A/5mA~55A, voltage: 0.15~1200V, rated power and standby power can be measured Minimum power resolution: 0.1mW 50th harmonic and distortion analysis
The AN87330(F) series high-accuracy power analyzer adopts the latest FPGA+ARM digital processing system to achieve synchronous sampling, which fully meets the testing needs of three-phase equipment in the fields of motors, home appliances, new energy etc. on the market. It is specially designed for production links such as automated line and integrated system etc. Features: High performance, wide frequency band: accuracy up to 0.1%, the bandwidth is DC, 0.5Hz~100kHz, suitable for testing of non-sinusoidal wave load. True differential synchronous conditioning sampling, guaranteeing super large direct test capability, voltage: 0.15~1000V, current: 5mA~50A/1mA~20A. Optional motor torque and speed interface, suitable for testing of three-phase motor mechanical power and energy consumption. Standard RS232, LAN port, standard MODBUS protocol, to meet the customization needs of multiple protocols, optional RS485, GPIB module. Support three-phase interphase angle test. Applications: Dynamic test of brushless DC motor FG signal RMS, peak-peak measurement, duty cycle calculation, wave data analysis. Measurement of RMS and frequency of 3-phase back electromotive force. Phase angle test Power measurement of inverter motor and inverter Power bandwidth DC, 0.5Hz~100kHz Current: 0~20A/current sensor Simultaneously measure input and output power 50th harmonic and distortion analysis Testing of torque/speed of 3-phase motor Support the latest type of motor test module, reserved motor sensor test interface, suitable for signal test of most motor sensor on the market, 3-phase motor efficiency test by single machine, synchronized signal, improved test accuracy.
The AN97H series frequency conversion power supply adopts digital technology and IGBT intelligent output, pure output wave, with excellent technical performance. The power supply has an anti-shock circuit, suitable for various shock loads such as motors and air conditioners; excellent dynamic characteristics, strong load adaptation, high efficiency, simple operation, cost-efficient, suitable for industries such as export electrical appliances plants, laboratories, defense. Features: Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start.; Adjustable voltage and frequency during output status; Measurement: voltage, current, frequency, active power; Level of voltage: 1.0~150.0V, 150.1~300.0V automatically adjusted or locked to 1.0~300.0V; Line voltage drop compensation Shortcuts groups, power-off memory, shortcuts key; Lock key, user-friendly design to prevent mis-operation; HD VFD display; Standard RS232 port, optional RS485 port or remote control port.
The AN77 series intelligent variable frequency power supply adopts digital technology and IGBT intelligent output, pure output wave. The power supply can output constant current AC wave, which can be used for short circuit. It outputs constant large current under the condition of small voltage, which can be used for detection of low-voltage power distribution devices such as air circuit breakers, contactors, and transformers, design and production of transformers and inductance devices. It is an ideal tester for device manufacturers, quality inspection institutes, and certification centers for applications with high current test conditions and low energy waste caused by the consumption of the load. Features: Low-voltage, high-current AC output to meet the test requirements of relevant regulations; Output frequency of 45~65Hz, suitable for the test requirements of different grids and devices; Adjust current and frequency in output state; Measurement: voltage, current, frequency, active power; Power-off memory and shortcut keys; Key lock, humanization design to prevent mis-operation; Standard RS232 port, optional RS485 port or remote control port. Custom of current source of any voltage level and current. Applications: Replace traditional voltage/current regulation, precise control, convenient operation
The ANFP series programmable AC power supply adopts FPGA digital control, instantaneous waveform control and high-frequency pulse width modulation (SPWM) technologies. It has the advantages of fast response speed, high output accuracy, and superior waveform quality; it can withstand 3 times the rating Current impact capability, strong load adaptability; with multiple output modes and complex programmable functions, which can achieve test requirements such as ladder, step, gradual change, etc.; with three-phase unbalanced output mode, to achieve relevant regulatory tests or simulate special power grids And so on. It can be widely used in laboratories, quality inspection units, scientific research institutes and certification centers. Features: 1. Adopt FPGA digital technology, realize accuracy control and high quality sine wave output; 2.Advanced power management mode: three-phase standard mode, three-phase unbalanced mode (three-phase voltage can be adjusted independently, phase difference 0~359.9�° adjustable), three-phase independent mode (three-phase voltage, frequency, can be adjusted independently) Parallel single-phase mode (three-phase parallel, single-phase output); 3.Programmable step, stage, varations function, can realize relevant regulations; 4.Harmonic function,2-40 times superposition; 5.Operating in over current shock (up to 3 times of rated current)within 2s, start the impact load of 1/3 capacity of power supply directly; 6.Adjustable voltage and frequency during output status, frequency change without transit time; 7.Measurement: voltage, current, current peak, frequency, active power, apparent power, power factor, voltage peak factor; 8.Online monitoring: monitor IGBT temperature, transformer temperature, fan speed, input voltage and other parameters during output status; 9.Operating data recorders: keep the record of power supply status and alarm code automatically during alarming, save the maintenance time; 10.Fan speed will be adjustable automatically with the temperature of power supply to reduce the noise; 11.Lock key, user-friendly design, automatically locking without operation for 5 minutes to prevent from operation mistakes; 12. Combination cabinet, 8" large-screen color LCD; 13.Standard RS232, optional RS485, GPIB, Ethernet, analog control and other remote communication/control. Application: 1. Output mode management (standard three-phase output, separated three-phase output, parallel single-phase output) 2. Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start
The ANFS series AC power supply adopts FPGA digital control, instantaneous waveform control and high-frequency pulse width modulation (SPWM) technologies. It has the advantages of fast response speed, high output accuracy, and superior waveform quality; it can withstand 3 times the rated current impact , a variety of output modes, which can achieve "one machine with multiple functions" to meet the needs of customers for flexible use; it adopts 8-inch color LCD with exquisite and high-grade appearance, and digital keys make the operation more convenient. Mainly used in applications such as home appliances, motors and production lines. It is one solution that meets the basic needs of traditional industries and a power supply alternative for equipment upgrades. It also provides laboratories, quality inspection units, scientific research institutes and other applications more flexible power configuration scheme. Features: 1. Adopt FPGA digital technology, realize accuracy control and high quality sine wave output; 2.Advanced power output mode management: standard three-phase output, separated three-phase output (three-phase voltage and frequency adjusted independently), parallel single-phase output (three phase parallel, single-phase output) to achieve multi-function; 3.Operating in over current shock (up to 3 times of rated current)within 2s, start the impact load of 1/3 capacity of power supply directly; 4.Adjustable voltage and frequency during output status, frequency change without transit time; 5.Measurement: voltage, current, current peak, frequency, active power, apparent power, power factor, voltage peak factor; 6.Online monitoring: monitor IGBT temperature, transformer temperature, fan speed, input voltage and other parameters during output status; 7.Operating data recorders: keep the record of power supply status and alarm code automatically during alarming, save the maintenance time; 8.Fan speed will be adjustable automatically with the temperature of power supply to reduce the noise; 9.Lock key, user-friendly design, automatically locking without operation for 5 minutes to prevent from operation mistakes; 10. 8-inch large-screen color LCD display, digital key operation; 11.Standard RS232, optional RS485, GPIB, Ethernet, analog control and other remote communication/control. Application: 1. Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start. 2. Output mode management (standard three-phase output, separated three-phase output, parallel single-phase output) 3. Large-size color LCD, digital key input, knob operation 4. PC control software
This ANFH series AC power supply adopts digital technology and IGBT intelligent output with pure output waveform. The power supply has the ability to withstand impact of 3 times the rated current, featuring strong load adaptability, suitable for various impact loads such as motors and air conditioners, with good dynamic characteristics. The power supply is designed suitable for 19 standard chassis, compact, and can be directly installed in a standard cabinet for various applications such as testing, system integration, production line, etc.; as well as 4.3 color LCD touch screen, convenient and intuitive, widely used in home appliance lines, labs, quality inspection institutes, certification centers etc. Features: 19â?? standard chassis, compact, can be installed in standard cabinet Withstand 3 times the rated current lasting for 2S, directly start impact load equivalent to 1/3 of the power Adjustment of voltage/frequency in output state Startup ramp-up and online ramp-up, and the ramp-up time can be set Measurements: voltage, current, frequency, active power Voltage level: 1.0~150.0V, 150.1~300.0V automatically adjustable or locked within 1.0~300.0V Line voltage drop compensation Multi shortcut groups, power-down memory and shortcut keys 4.3â?? color touch screen, convenient and intuitive Key lock and humanized design to avoid misoperation Operating data recorders: automatically record the power state when alarming and alarm code, etc Standard RS232 port, optional RS485/GPIB/Ethernet port or analog control Application: 1. Impact resistant: impact loads with 1/3 power can be directly started without soft start 2. Adjustment of voltage/frequency in output state 3. Start ramp up and online ramp up 4. 4.3 color touch screen, convenient and intuitive
The AN50(F) low-power series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong overcurrent capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: 350mm deep full range of standard chassis, suitable for system integration and portable applications. High frequency PWM and full-bridge conversion technology, with high efficiency. Strong current/power overload capacity, up to 110%. Exceptional output stability. Voltage drop compensation terminal for large current output. Complete protection to ensure normal operation of power supply unit and load security. LED segment display. Clear, convenient for operation. Serial/parallel output, convenient expansion. Powerful programmable features to meet various testing needs. Supports SCPI/MODBUS-RTU standard protocol.
The AN50 series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong overcurrent capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: Work mode: CV, CC; Use high frequency PWM and full-bridge convert technique to achieve high efficiency; High power density design, standard case, wide application; LCD display, convenient for operation; 10 setting and quick recall groups; Exceptional output stability. Source voltage effect
The AN51(F)low-power series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong over-current capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, chips and electronic components, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: Colorful LCD display, digital keys,Convenient and easy for operation. 350mm deep full range of standard chassis, suitable for system integration and portable applications. High frequency PWM and full-bridge conversion technology, with high efficiency. Strong current/power overload capacity, up to 100%. Exceptional output stability. Voltage drop compensation terminal for large current output. Complete protection to ensure normal operation of power supply unit and load security. Serial/parallel output, convenient expansion.
The AN53(F) series DC Testing Power adopts Active Power Factor Correction technology, high frequency LLC multi-resonant soft switching inverter technology, to achieve high power factor, fast dynamic response, low output ripple, high power density, and Constant Power (CP) wide range output. It has small size, light weight, low noise, high efficiency and easy operation etc. It can be used for manufacturing, testing and maintenance of electronic equipment such as aircraft and airborne equipment, radar and navigation etc, as well as industrial and mining enterprises, college laboratories, institutes and so on. Features: Wide range output up to 3 times of "matrix" power supply of same power; Active Power Factor Correction, full load power factor of more than 0.99; High frequency LLC multi-resonant inverter with efficiency up to 0.93; Industrial best transient response speed; Constant Voltage (CV), Constant Current (CC) and Constant Power (CP) output for multi applications; Powerful programmable function, flexible settings; Built-in precise voltage/current measurement, stable output; Lead drop compensation terminal for output lead at large current; Complete protection for normal operation of power supply unit and load security; High brightness color LCD display, beautiful, simple, intuitive; Supports parallel output, expanding power/current range; Standard host software.
ACACUS 30 KVA , 1500 RPM ,50/60 HZ , 76db silent canopy ATS OTOSK
We have available following Ships spareparts for Sale: Product-liquid level metar Maker-Yamatake Honeywell Type-kfp 102z
We have available following ships spareparts for Sale: Product-Power supply Maker-ICOM Type-PS 80 Sr no.08416 Made in Japan
We have available following ships spares for Sale: Product-Controller pressure meter Maker-Sauter Model no:DFC17878 F001
Plug-in LED Power Supply / LED Driver  FEATURES  1. Independent power supply for constant voltage LED lamp 2. Plug-in input and mini DC socket / cable output 3. Class II protection against electric shock from direct and indirect contact 4. SELV output 5. No load power consumption no more than 0.3W 6. Auto restart after fault conditions removal 7. Open circuit,short circut and over load protection 8. Efficiency no less than 70%,AC230V,full load  STANDARDS  EN 61347-1  EN 61347-2-13  EN 55015  EN 61000-3-2  EN 61000-3-3  EN 61547
CC Version Leading/Trailing Edge Dimmable LED Power Supply / LED Driver  FEATURES  1. Independent dimmable power supply for constant current LED lamp 2. Special design screw terminal for field connection 3. Class II protection against electric shock from direct and indirect contact 4. Auto restart after fault conditions removal 5. Open circuit,short circut and over load protection 6. The output current of the power supply could be dimmed between 10%-100% by trailing edge or leading edge dimmers 7. Efficiency no less than 75%,AC230V,full load  STANDARDS  EN 61347-1  EN 61347-2-13  EN 55015  EN 61000-3-2  EN 61000-3-3  EN 61547
Toluene flow meter Toluene flow meter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display of Toluene flow meter together with electrical instrument can achieve remote only instantaneous flow or accumulated flow. The Toluene flow meter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum. Model Flow range Connection CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread CX-M3-SS/AL 1-300 ml/min G1/8 female thread CX-M5-SS/AL 5-1000 ml/min G1/8 female thread CX-M6-SS/AL 0.5-100 l/H G1/4 female thread CX-M9-SS/AL 5-550 l/H G1/4 female thread CX-M12-SS/AL 1~30 L/min G1/2 female thread CX-M25-SS/AL 5-110 l/min G1 female thread CX-M40-SS/AL 10-250L/min G1 1/2 female thread CX-M50-SS/AL 10-500L/min G2 female thread Feature 1) Compact and economical design suited for OEM 2) High accuracy and repeatability 3) No requirement for flow conditioning 4)Stainless steel rotors 5) Measures high and low viscosity liquids 6)Original Equipment Manufacturers Select the JSN and select the Toluene flow meter,we will provide the professional service for you.
spectrometry Photomultiplier Tubes(PMT) Microchannel plates(MCP) Proportional Counters GM Tube Avalanche Photo Diode (APD) Solid state detectors Ionization Chambers gas chromatography Electron multiplier Detectors Nuclear Instruments Electrophoresis DNA sequencing Radiation counter Electron Beam Ion Beam,High voltage bias Hipot Testing Precision Lenses Image Intensifiers Semicon-ductor Testing Electrostatic discharge Testing Provides power to the pulse power Capacitor Discharging Life Sciences Medical chemical Applications Science Laboratory Applications Industrial Applications SUMMARY Wisman's PM series of six-sided shielded are high performance products designed with hybrid topology of linear and switch mode power conversion techniques delivering lower noise with higher efficiency.It is applied to Photomultiplier Tubes(PMT),Solid state detectors,Ultrasonic transducers and so on.PM series can control by inside potentiometer and outside potentiometer or computer.An optional RS-232 or RS-485 is available.PM module is available as either a positive or negative supply .that is ideal for OEM applications. SPECIFICATIONS Input Voltage: +24Vdc- +30Vdc@700mA MAXIMUM,Option �±12Vdc ~ �±18Vdc @700mA MAXIMUM. Input Current: Less than 700mA at full output. Output Voltage: 0.5KV,1KV,1.5KV,2KV,3KV,4KV,5KV,7.5KV,10KV, Output POWER: 2W,2.5W,3W,4W,5W,6W,8W,10W, Output Voltage Control: 1) Internal ten-turn potentiometer 2) External potentiometer 5k to 100k (set internal pot. to max.) 3) Remote voltage programming (0 to +10V gives 0 to full output). Accuracy 0.1%. Remote Control: Remote programming Common Mode Range: 0VDC to +10VDC Line Regulation: 0.001% for input change of 5%. Load Regulation: 0.001% for 100 to full load change(at maximum voltage). Temperature Coefficient:Better than 10ppm/C. Stability:
Ring chamber orifice meter Product name:, ring chamber orifice meter Product code:, 151116-813 Processing custom origin:, in kaifeng Type:, type throttling device lwg Type:, volumetric flowmeter Measuring range:, 0-100 (m3 / h) Level of accuracy:, + / - 1.0% Nominal size:, (dn50- dn2600 (mm) Job stress:, 40 or less (mpa) Working temperature:, 70)
