High voltage power supply (HPS) for image intensifier is an electron converter that is an ability to transform from low voltage of direct current into once or a series of high voltage of direct current (DC/DC Converter). It consists two assembly an oscillator module and a high multiplier module. Features: Small size, lightweight wrap-around construction Automatic brightness control (ABC) Bright source protection (BSP) Adjustable maximum brightness and gain External gain adjustment Conform to environmental requirement of military products High accurancy control Programmable Fast stable response Large range for pulse width Applications: Image intensifiers
q series DC power supply 32 point source output module qy81p product specification: transistor source output module output Optocoupler 12-24vdc 20 15% 0.1a/point, 2A /common terminal maximum starting current]0.7A, 10ms or less leakage current at off 0.1mA or less 0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A off on response time 1ms or less on off response time] 1ms or less (rated load, resistive load) Zener diode protection function] activate the overheating protection function in 2-point increments and the overcurrent short-circuit protection function in 1-point increments
The power supply module is a power supply that can be directly mounted on the printed circuit board. It is characterized by providing power supply for integrated circuit (ASIC), digital signal processor (DSP), microprocessor, memory, field programmable gate array (FPGA) and other digital or analog loads. Generally speaking, such modules are called point of load (POL) power supply system or point of use power supply system (pups). Due to the advantages of modular structure, modular power supply is widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields, automotive electronics, aerospace and so on. Q61P is the power module of q series PLC. The power module is a module that provides DC5V power to each module of the programmable controller installed on the base plate. Qy61p parameters: Q61p-a1 input voltage range: AC100 ~ 240V output voltage: DC5V output current: 6A
GF1021 single phase portable energy meter test system used to test single phase energy meter error. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output. Widely used in lab and field, and then as single phase standard source. The portable meter test equipment offers high functionality combined with an excellent menu guided operation via coloured 7' touch screen or externally via interface.
GF102 series portable single phase energy meter test bench used to test 1pc or 3pcs single phase energy meter or AC meter at same time. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output from 120A/600V. Widely used in lab and field, and then as single phase standard source. It is suite for electricity meter manufacturing enterprises, scientific research institutes, metrological service institutions, electric power companies etc.
The GF302D3 portable three phase energy meter test bench consists of an integrated three phase 120A current source and 600V voltage source and a class 0.02 three phase electronic reference standard meter. The energy meter test bench is particularly designed for analysis of complete metering installations and local mains conditions. The meter test bench offers high functionality combined with an excellent menu guided operation via built-in thirty keys and colored 7" touch LCD-display. It can auto & manual test all kinds of energy meter error. Using on site or in the laboratory. It can preset a variety of test schemes for testing energy meter.
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
The GF302D portable meter test equipment is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single/three phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the meter test equipment also can be used as one high precision standard power source, voltage source and current source. Portable design, used in the laboratory or on site to auto check energy meter error.
Guangzhou Qiandi Electronics Co., Ltd., wholesale, retail, on-demand custom processing 12-24V DC: brushless, brushed DC motor products, you are welcome to contact us. Note: 1. This product JGB37-545 Brushed DC Motor is not a stock product. The product page attributes, inner page details, and delivery time description are for reference only. 1.1 12-24V DC 28-48W - Model:JGB37-545 size: �?37-x L85 mm; Net weight: 280g. 1.2 Structure and working principle: Brushed 1.3 MOQ: 550 unints 2. Before proofing and placing an order, you need to get confirmation with the seller before you can take it. Production cycle: 15-25 days. Other specifications of DC motor products can be customized and supplied as required. Introduction to DC Motor Application DC gear motors are widely used in smart cars, automation equipment, automatic doors and windows, vending machines, smart homes, office equipment, automatic barbecue grills, automatic drying racks, mahjong machines, medical equipment, parking locks, game consoles, etc. DC gear motors are widely used in smart cars, automation equipment, automatic doors and windows, vending machines, smart homes, office equipment, automatic barbecue grills, automatic drying racks, mahjong machines, medical equipment, parking locks, game consoles, etc. 1. medical instruments 2. Crane machine 2. Automatic Mahjong Table 3. Smart drying rack 4. vending machine 5. Industrial machine 6. Automatic grill Automatic grill 7. Billboard billboard Contact: Mr. Paul Lee
Qiandi(Guangzhou) Electronic Technology Co., Ltd. supplies electronic scales, hook scales, luggage scales, four-corner platform scales LoadCell pressure load cells, aluminum elastomers, steel sheet elastomers, dimensions and specifications, and can be customized according to incoming materials and supplied on time. Quality Assurance! Load cells products are customized on demand, Sales hotline:
This test bench can be widely used in measurement centers of start grid, management and electric energy measuring departments of power supply companies, national measurement laboratories, as well as large industrial and mining enterprises and electric meter manufacturers.
HS-3303M is a three-phase electric energy meter inspection device designed based on the requirements of the IR46 metering part, which meets the harmonic requirements of the IR46 electric energy meter. It can output square wave, peak wave, current multiple zero-crossing wave, higher harmonics, odd harmonics, sub-harmonics, custom harmonics, etc. This device is equipped with 3 epitopes and has a small structure, which is suitable for product research and development, model selection, random inspection, etc. For more product details,please see Energy Meter Test Bench this page :
The 5 blades horizontal axis wind turbine has a smart blade aerodynamics braking and electromagnetic speed limitation function. Patented aerofoil 5 blades design with true symmetrical and twisted aerodynamic feature which ensures rotor capture maximum power from wind and operates in amazingly low noise and minimal vibration. True symmetrical and balanced aerofoil blade ensure rotor matching with generator perfectly. Large ratio of tip section chord to root section chord and variable chord airfoil blade ensures rotor start-up easily and running smoothly with high torque and RPM at lower wind condition. Aerodynamic blades designed with over-speed braking system to make sure generator well protected in higher wind. Reinforced Glass-Fiber Nylon is using advanced thermoplastic engineering and precision injection molding technology for higher strength, flexibility and reliability. Our wind turbine with minimal vibration and low noise could be mounted on rooftop safely and its operation wonâ??t affect resident.
MOQ: 4 - 8 units / Shipping: Air Freight or Sea Freight / Products: Hisaki LP1250 1.1kw 3hp Petrol Engine (Recoil Starter) / Hisaki LP2500 2.2kw 6.5hp Petrol Engine (Recoil Starter) / Hisaki LP3500 3.2kw 7.5hp Petrol Engine (Recoil Starter) / Hisaki LP5500B 5.5kw 13hp Petrol Engine with Starter / Hisaki LP6500B 6.5kw 15hp Petrol Engine with Starter / Hisaki LP8000B 7.5kw 192F 16hp Petrol Engine with Starter
YE800 Mobile electric dosing metering oil system YE800 Technical data: Oil control gun:1pcs Electric pump:220VAC,50HZ Flow rate:10-18LPM(Liter/Min) Preset scope:1-999.9L Accuracy: 1%; High pressure oil hose:4M Its very suitable for factory working line ,workstations and it can preset liters which you want to dispens automatic.
ANEVT(F) series high-precision bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range; compared with conventional bidirectional power supply, it can achieve full range of high-precision output from 0V to full scale, up to 2000V, and the maximum power of a single machine can reach 1MW; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Applications: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
ANEVT(F) series dual-channel bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response; two channels independently configured and not affect each other, which can be used in parallel to expand the DC output capacity and reduce investment by customer; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Features: Independent channel configuration: each channel is independently programmed, voltage, current and power parameters are set independently, and the operating parameters in programming mode are set independently. The channels are independent of each other and do not affect each other. Parallel channels: The two channels do not affect each other, and can be used in parallel. Grid feedback: both power supply and load characteristics, achieving the function of load for automatic energy feedback to the grid in addition to high-power DC power supply performance; energy saving, green and environment protection. High-precision output: accuracy of output voltage: �±0.05% F.S. Fast dynamic response: output voltage response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms; +90%~-90% forward/reverse switching time: â?¤10ms. Mainstream high-frequency PWM rectification control, power factor â?¥0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid. Advanced IGBT parallel technology, efficient and reliable. CC, CV, CP modes. Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection. Built-in EMI filter to filter the interference signal caused by the high-frequency switching process. Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer. Programmable slow-rise output. Application: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
The ANEVH series is a programmable DC power supply that integrates DC power supply and feedback load, which can be used as a source and output power; or used as load to realize sink function, absorbing power and returning to the grid cleanly; standard dual-quadrant operation. Built-in voltage curves for DIN40839, ISO-16750-2 and ISO21848 standard automotive grids. Comprehensive OTP, OVP, OCP, OPP protection. S terminal compensation Application: Micro-grid and micro-inverter testing Automotive motor, controller and power battery testing Fuel cell test, fuel cell DCDC test UPS, on-board charger (OBC), charging spot, bidirectional DC-DC test Industrial testing for electrolysis, electroplating, welding, etc. Testing of communication power supply, LED product Testing of automotive electronics, avionics High power test, DC feedback load demand application
This AN8721PV3(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, accurate and durable. Features: AC/DC universal wide-range, DC ~ 4kHz bandwidth, load adaptability; Reliable, stable, compact, light; High measurement speed, up to 0.25s refresh rate; Voltage/current ratio setting, easy expansion; Voltage, current, power over-limit sound and light alarm, quick identification of abnormal products; Standard RS-232 or RS-485 serial port, MODBUS communication, test automation; Optional digital I/O, remote input and alarm signal output. Applications: Strict industrial site type test; High temperature aging room test; Home appliances, commercial appliances line standby power measurement; Power tools test; Lighting test.
AN87500(F) multi-channel power analyzer is specially designed for multi-channel AC/DC power measurement, suitable for power measurement of most electrical appliances, power supplies, motors, inverters and other products. The product takes the high-speed DSP processor as the core, adopts 16-bit high-speed high-performance AD direct sampling method for data acquisition, and can realize multi-channel simultaneous measurement, covering: voltage, current, power, peak voltage, peak current, power factor, crest factor, frequency, electric energy, current integral, efficiency, harmonic content and 3-phase electrical parameters, with serial communication (RS232/RS485, GPIB), remote control, alarm parameter preset and so on, supporting 1P2W/1P3W/3P3W/3V3A/3P4W and other wiring methods, meeting testing requirements of various power supply. Features: Multi-channel: 1~6 channels, flexible configuration of 1~6 single-phase, three-phase three-wire Ã?? 2, three-phase four-wire Ã?? 2, four-phase (DC+ three-phase three-wire) and other modes, satisfy test requirements of varies load (air conditioner, converter, inverter, motor); High accuracy: high-speed DSP processor, 16-bit high-speed high-accuracy AD converter, accuracy up to 0.1%, 100ms display cycle; Wide power range: current up to 50A for a single channel (optional 20A, 10A, 5A, 2A, 1A etc. or combination), minimum 0.lmW power resolution, satisfy test requirements of standby power consumption and rated power; Broadband: AC/DC signals, power measurement bandwidth: DC, 0.5Hz~100kHz, satisfy power test requirements of varies standard and non-standard sine wave load; Multi harmonic analysis: simultaneous 6-channel harmonic analysis, maximum 50th harmonic measurement, distortion analysis, visual display of total harmonic contents and total contents; Multi frequency measurement: simultaneous 6-channel frequency measurement; Line filtering: 500Hz/5.5kHz low-pass filter to measure the fundamental PWM waveform, filter out the high-frequency interference of the switching power supply current; Sensor: variable ratio, common I-I/V-V voltage/current transformers; I-V type current sensor with BNC interface, maximum input voltage 10V, optional high current sensor; Efficiency calculation: measure the input/output energy consumption of the equipment at the same time, and calculate its efficiency; Accumulation of electric energy: positive electric energy, reverse electric energy and integrated electric energy can be separately accumulated to measure the trading electric energy; Threshold alarm: independent 10 groups of voltage, current, power, power factor and other thresholds and measurement threshold for each channel, automatic upper/lower limit judgment and alarm; Chinese/English interface: Chinese or English operation and time/date display.
