Input Characteristics 1.Voltage: 90 ~ 264V AC Full range 2.Frequency: 47 ~ 63Hz 3.Input Current: 10.0A for 115VAC, 5.0A for 230VAC. 4.Inrush Current: 25A for 115VAC, 50A for 230VAC per power supply module. Output Characteristics: Output Voltage Max. Current +3.3V 25A +5V 25A +12V 41A -12V 0.8A +5VSB 3.5A Note: The combined total power from 5V & 3.3V shall not exceed 170W. 2pcs in 1 carton, N.W.: 9.5kgs, G.W.: 10kgs Carton size: 45x31x19cm
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; hold up time¡Ý20mS Cooling by free air convection; Auto recovery; Operation temperature: -40¡æ~+70¡æ; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50,000Hours, 2 years warranty Compliance to EN61347-2-13 /IEC61347-2-13 /UL8750.
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; Hold up time 20mS Cooling by free air convection; Auto recovery; Operation temperature: -10~+50; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50, 000Hours, 2 years warranty Compliance to EN60950 /IEC60950 /UL60950.
CO2 laser power supply, special power CO2 laser, YAG laser welding machine power source, YAG laser cutting machine power, fast-axial flow laser power, Helium-neon laser tube laser power, YAG krypton lamp laser power, laser power supplies, DC UPS, DC - DC converter, xenon lamp power supply, high voltage power supply, laser power accessories, AC voltage source, switching power supply series.
Neufeld Power is the low price leader in the manufacture of quality LED power supplies. Neufeld Power is a manufacturer specializing in low cost, high performance IP66 rated (dustproof and waterproof) constant current LED drivers and constant voltage LED power supplies with high efficiency built-in active Power Factor Correction (PFC) for both indoor and outdoor LED lighting applications. Neufeld Power is a manufacturer of quality LED power supplies that are high efficiency (up to 90% efficiency), durable (metal cased), long lasting (3 and 4 years factory warranty) and comply with international standards. Neufeld Power is committed to providing our clients with unbeatable value and service and the most cost-effective manufacturer solutions for LED power supplies in the world: 20W IP66 LED power supplies and drivers from US$ 2.45, 60W IP66 LED power supplies and drivers from US$ 6.50 (2011/12). Visit the Neufeld Power website for full details and to receive our free price list today. Neufeld Power offers a large range of low cost, high performance LED driver and power supply manufacturer services including OEM LED driver and power supply manufacturer services, ODM LED driver and power supply manufacturer services, private label manufacturer services and international certification/standards LED driver and power supply manufacturer services. IP66 LED Driver Power Supply Prices (2011/12): 10W ... from US$ 2.15 15W ... from US$ 2.25 20W ... from US$ 2.45 30W ... from US$ 3.85 50W ... from US$ 5.25 60W ... from US$ 6.50.
Feature: Comply with Intel TFX12V V2.1 24PIN connector for M/B MTBF 50,000 hours at 25 Perfect circuit board layout for excellent heat dissipation EMI: EN55022 Class B Specifications: AC input voltage: 180 TO 264 VAC AC input frequency: 47/63 Hz AC input current: 6 A RMS MAX. FOR 230 VAC Maximuminrush current: 120 A FOR 230 VAC Cold start Line regulation: 1% Load regulation: 5% (Only -5V, 12V10%) Minimumload: +5V/2.0A+12V/1.0A Ripple&noise: +3.3V/80mV +5V/80mV +12v/150Mv -12V/240mV +5VSB/80Mv Efficiency: 70% Minimum at full load Operating temperature: 0~+50 Storage temperature: -40~+85 Storage humidity: 10%~90% Mean time between failure: 20K HOURS MINIMUM AT 25 Size (L*W*H): (180+55)mm*90mm*70mm MODEL WATT DC OUTPUT +5V&+3.3V +5V +12V/V1 +12V/V2 -5V -12V +3.3V +5VSB EZ250ATX 250W 11A 5A 12A / 0.5A 9A 2A 75W EZ300ATX 300W 13A 6A 15A / 0.5A 10A 2A 80W EZ350ATX 350W 17A 8A 18A / 0.5A 12A 2A 90W EZ400ATX 400W 19A 10A 21A / 0.5A 14A 2A 100W EZ500ATX 500W 23A 14A 27A / 0.5A 18A 2A 120W EZ600ATX 600W 28A 18A 33A / 0.5A 23A 2.5A 150W 10pcs/box.
Input voltage: DC24/48/110V Output voltage options: DC5/12/24V Output Power: 50W Size: 61.00 x57.90 x 12.70mm / 2.40x2.28 x0.50 inch HDL series power range: 50-350W. Small size, half brick design Wide input voltage range Typical efficiency 90% Switching frequency: 300KHz Overcurrent /Short circuit protection, Self-furbish Input-output isolate Board in-line type installs Metal case, Low Output Ripple High power density.
Input voltage: DC 5/12/24/48V Output voltage options: DC5/9/12/15/24V Output Power: 2W WR power range: 1W-2W. Wide inputvoltage range; Isolation; Regulated output; 1W Isolation voltage: 1500VDC, 3000VDC Efficiency: 80% Working temperature: -40C~ +85C MTBF¡Y 10¡¨¢ 105Hrs In line with RoHS codes Line Regulation(once input change 1%) ¡¨¤0.2% Load regulation(10%-100% full load) ¡¨¤0.5% Ripple and noise (20MHz Band width)
Power supply 12V/1A power adaptor. Laptop Adapter, CCD Camera Lenses, Dome CCD Cameras, CCD Camera Parts and Accessories, CCD Cameras, CCTV Components, CCTV Decoder. CCTV Monitors, Infrared Illuminators, Quad Processors, Wireless CCD Cameras, Bracket, Housing, DVR. Power supply 12V/1A power adaptor.
Features: Low ripple and low noise High resolution and accuracy (0.1mV/0.01mA) Built-in high-accuracy 5 1/2 voltmeter and milliohmmeter Supporting high-accuracy and dynamic programming output High-luminance VFD screen with two lines& four channels display Intellegent fan system fan will be automatically initiated according to the temperature Supporting remote voltage compensation and multidata storage Supporting external trigger input and output Power-on-self-test, software calibration and standard rack mount Using standard SCPI protocol Communication mode: GPIB/RS232/RS485/USB M8813(0-150V/0-1A/150W)
Features: Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CW Over current, over voltage, over power, over heat, polarity reversed protection High-luminance VFD screen with two lines& four channels display Intellegent fan system fan will be automatically initiated according to the temperature Soft start time setting, carrying the power supplier according to the voltage value set Battery testing and short-circuit function Available of dynamic testing and rising edge and falling edge setting Supporting external trigger input and output External current waveform monitor terminal Supporting remote voltage compensation and multidata storage Power-on-self-test, software calibration and standard rack mount Communication mode: GPIB/RS232/RS485/USB. M9712 ( 0-30A/0-150V/300W)
Main specifications: Switch Type: AC->DC Power supply range: 85-132VAC/170-264VAC Output DC voltage: 5-48V DC DC output power range: 5-1500W. For more information please be free to contact us for detailed PDF datasheets. Standard package.
Stldf series flash lamp-pumped laser power supplies are designed to drive solid state-state lasers and Eo Q-switches. Power supplies are complete pumping solutions and include all required modules - bank of storage capacitors, charging module and discharging circuit with triggering and simmer modules.
We are manfactured of power supply in china and the products have ce, ul and saa aslo. 1k, later tell you
EMI Filters
Digital Ammeter 1. POWER SAPPLY VOLTAGE: 85~264V aC~. 2. POWER SAPPLY CURRENT: max.100A. 3. Dimension: 39X26X29 mm.
Power Strip 1.Rating: 10A 250V~. pending. 15A 250V~. pending. 2.Insulation Resistance: over 100MWat 500VDC. 3.DielectricStrength: 2000VK60V AC for one second. 4.Body material: PC UL 94V-0
(1) property: High density, high mechanical strength, high electric strength and low compression index. (2) quality standard: IEC 60641-3-1: 1992 /GB/T 19264.3 -2003 (3) size: 4400mmX2200mm, 6300mm x 3200 mm and customized size (4) thickness: 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 (5) material: 100% unbleached sulfate pulp imported from Canada. (6) detecting instruction: On-line highly sensitive metal detector, avoiding metal particle existence (7) application: Mainly used in oil-immersed transformer as insulation material, also used in reactor mutual inductanceware, electric device and etc.
Our core board is mainly used to make high strength chemical fiber tubes, yarn bobbins, industrial paper tubes for paper milling and plastic film ect. The specification of our core board is as following : (1)Substance:230g/m2 -600g/m2 (2)Rade:F200,F300,F400,F500,F600,F800,FB300,FB500 (3)Reel width:80mm-2200mm (4)Reel diameter:1100-1150mm Packing:wrapped with vinyl film for water proof 1MT/ROLL.
No : JJ-801.1 " A.C./D.C. POWER SUPPLY UNIT " Provides output 0-20 volts d.c. and 0-25 volts a.c continuously variable at 10 Amps. with dual scale. Deluxe meter to read volts ac/dc. Output is provided at 4 mm socket terminals separate for a.c. and d.c. ON/OFF switch, indicator and two output safety fuse. The unit is enclosed in a ventilated steel painted cabinet. No : JJ-801.2 " A.C./D.C. POWER SUPPLY UNIT " Provides output 0-20 volts d.c. and 0-25 volts a.c continuously variable at 5 Amps. with dual scale. Deluxe meter to read volts ac/dc. Output is provided at 4 mm socket terminals separate for a.c. and d.c. ON/OFF switch, indicator and two output safety fuse. The unit is enclosed in a ventilated steel painted cabinet. NOTE: On request following ranges of power supplies are also available :- Model Number *JJ-797.1 L.V. POWER SUPPLY AC/DC *JJ-798.1 H.T. POWER SUPPLY UNIT *JJ-799.1 5KV EHT SUPPLY *JJ-799.2 6KV EHT SUPPLY *JJ-800.1 L.T. POWER SUPPLY UNIT (D.C. Power Supply) *JJ-802.1 MULTITAP TRANSFORMER *JJ-803.1 SIGNAL GENERATOR,1 Hz to 100 K Hz *JJ-804.1 SIGNAL GENERATOR AND AMPLIFIER *JJ-805.1 OHMS LAW APPARATUS *JJ-806.1 HELMHOLTZ COILS *JJ-807.1 UNIVERSAL STAND.
