Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of weight change of the workpieces.
Automatic Frequency Adjustment: Automatic output frequency adjustment in real-time ensures the load always works at its resonant frequency.
Automatic Resonant Frequency Search: Search out and output the resonant frequency of the load. Other related parameters are also set automatically
Counting: Count the number of the workpieces. The controller will slow down or stop when counting up to the preset value. (available on SDVC34-XLRJ)
Rs485 Communication: All parameters of the controller can be adjusted via Rs485
Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PnP and nPn type switch sensors.
Sync Output: Sync the output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid the beat effect.
Overvoltage Protection: If the input voltage is too high, the power supply of the controller will be shut down automatically to protect itself.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the controller's output is short-circuited, it will shut down its production to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side the controller will work again after power is on.
Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real time to ensure constant preset feed speed regardless of weight change of the workpieces.
Automatic Frequency Adjustment: Automatic output frequency adjustment in real time to make sure the load is always working at its resonant frequency.
Automatic Resonant Frequency Search: Search out and output resonant frequency of the load. other related parameters are also set automatically
Counting: Count number of the workpieces. The controller will slow down or stop when count up to preset value. (available on SDVC34MRJ)
Rs485 Communication: All parameters of the controller can be adjusted via R485.
Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PNP and NPN type switch sensors
Sync Output: Sync output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid beat effect
Overvoltage Protection: If input voltage is too high, power supply of the controller will be shutdown automatically to protect itself.
Digital Overheat Protection: If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value he controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power on.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn the controller on/off.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
This product is suitable for 10~500kV substations, power plants, high-rise buildings, residential areas and other distribution rooms,
as well as small self-owned power plants, as high voltage switches, relay protection, automatic devices and other operations,
control power supply and emergency lighting power supply. It can also be used in other places that require DC current power supply.
This product conforms to the technical requirements of ZBK45017-90 "General Technical Conditions for DC panel for power network system",
DL/T459-200 < Technical conditions for ordering DC Power panel (cabinet) "and LS(W)30-40JT < Technical Conditions for microcomputer
Control DC Power Cabinet" and other standards, and the product quality reaches the domestic leading level.
The charging device of this product can use high-frequency charging module and phased charging machine.
The controller of this product can be PLC control type and single chip microcomputer type.
2844 Electric Power Supply Components Suppliers
Short on time? Let Electric Power Supply Components sellers contact you.
2.4kWh-2kW Portable Power Supply
Portable charging station is fashion and convenient to carry. This outdoor portable power generator, portable electricity generator can support power supply for many home appliances for emergency situation and can also meet the electricity demand of various outdoor operations and automobile tour. The ece energy's power bank equipped with large capacity battery and quick charging function, to help you ensure the normal operation of various electrical appliances in case of unexpected power failure.
2.4KWh-2KW Portable Power Station Detail
AC Fast Charging
Using EVE A grade lithium iron phosphate battery cells from ece solar, the cycle life is up to 4000+, the discharge performance is good, and it can be used in low temperature environments.
Built-in LifePO4 battery
It has multiple functional interfaces such as USB, AC, and DC, which can meet a variety of electrical application scenarios.
Supports Fast Charging
Supports fast charging with AC power adapter, fully charged in 5 hours, saving charging time.
BMS
Built in smart BMS and pure sine wave inverter, with high and low temperature protection, short circuit protection, overcurrent protection, overcharge and overdischarge protection functions
2.4KWh-2KW Portable Power Station Specification
As a portable power supplier, we will do our best to meet all the needs of customers.
If you want to know more types of solar off grid batteries, please visit our website.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn the controller on/off.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn the controller on/off.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Frequency Adjustment: The controller's output frequency can be manually adjusted to the vibratory feeder's resonant frequency to achieve a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: When powered on, the controller will gently increase output voltage from 0 to the preset value to avoid a sudden shake. The soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn the controller on/off.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the output of the controller is short-circuited, the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of weight change of the workpieces.
Automatic Resonant Frequency Search: Search out and output the resonant frequency of the load. other related parameters are also set automatically
Rs485 Communication: All parameters of the controller can be adjusted via R485.
Sync Output: Sync the output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid beat effect
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the controller's output is short-circuited, it will shut down its production to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Frequency Adjustment: The output frequency of the controller can be manually adjusted to the resonant frequency of the vibratory feeder to get a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: The controller will gently increase output voltage from 0 to the preset value when powered on to avoid sudden shaking. Soft start time can be digitally preset.
Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn on/off the controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds.
Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If the controller's output is short-circuited, the controller will shut down its production to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by a voltage that is too high.
24W AC DC adapter 12VDC 2A Switching power supply ROHS Charger for AP wireless IP hone 5G Signal Booster CCTV camera
*. Input:100-240VAC 50/60Hz
*. Output:12VDC 2A 24W
*. AC Inlet: USï¼?EU, AU, UK plug optional
*.DC cord: 0.5~2M Length, 5.5*2.5mm or 5.5*2.1mm DC jack
*.output type: Single output
*.Efficiency: 85% Min
*.Ripple & Noise:200mV p-p
*. Protection:OVP SCP OCP OTP
*. Appliance: household appliances, drinking devices, security devices, network communication and more
*. Material: ABS+Plastic housing
*. Warranty:2 years
*.Safety Approval: CE FC ROHS CCC GS CB KC PSE and more
14.5V 6A switching power supply 87W desk-top AC DC adapter Car refrigerator charger ROHS C8 car cooler power adapter
*. Input:100-240VAC 50/60Hz
*. Output:14.5VDC 6A 87W
*. AC Inlet: AC inlet with IEC320-C8, 2 pins socket
*.DC cord: 0.5~2M Length, B connector
*.output type: Single output
*.Efficiency: 87% Min
*.Ripple & Noise:240mV p-p
*. Protection:OVP SCP OCP OTP
*. Appliance: Car refrigerator, car cooler, bar wine cooler, etc.
*. Material: Plastic housing, Compliance UL 94 V-0
*. Warranty:2 years
*.Safety Approval: CE FC ROHS CCC GS CB KC PSE UL/CUL CQC C-TICK and more
Futina Power Strip with Surge Protector and USB
Futina usb outlet power strip is a set of electrical sockets that attach with USB socket, as a specialized USB power strip supplier, Futina provides more usb outlet to provide power for your devices.
As a professional smart usb power strip supplier, Futina offers top-of-the-line products that combine functionality, safety, and convenience. Whether you need power solutions for your home, office, or commercial space, Futina's USB power strips are designed to enhance connectivity, streamline device charging, and protect valuable electronics. Partner with Futina and experience the difference of reliable, high-performance power strips that meet the demands of the modern world. Elevate your power management solutions with power strip with usb charging ports supplier Futina's exceptional surge protector power strip with usb ports.
Specification of Surge Protector USB Power Strip
Brand name Futina
Standard TIS Standard
Mechanical Life 20,000 Times
Module Color White
Ma. Voltage 250V
Current 16A
Type 3* Euro-American socket + 3* USB socket extension cord with 2M * 1.5 mm�² with 3 round pin plug
OEM,ODM Accept OEM, ODM, Customization
Certification IEC/TIS
Materials PC/Brass
Warranty 5 years
MOQ 2000pcs
Packing Details Inner packing: 1pcs/box
Outer packing: 30pcs/ctn
Delivery Detail 30-45 days
Highlight Of USB Power Strip for Furniture
V0 and V1 grade 850 â?? resistant PC materials
Power split according to devices, provide safe charging power as your original one, protect your device from damaging.
Thickened power cable, Ensure stable current output
Buckle combination design, keep the power strip more firm and stable
Automatically cut off power supply when current exceeds maximum value to prevent leakage
Futina provide the complete range of electrical wiring devices, including wall switches and socket, power strip, ground box & outlet, circuit breaker, power distribution box, exhaust fan and LED home lighting.
HZ601 Collection Programmable DC Standard Power Source is a high-level meter & power source integrated instrument which invested by Shenzhen Hangzhi, who gathering high-tech talents, adopting the unique electronic compensation linear sampling technology which ensure full range linearity of small signals (�µA & mV level) and super signals (50A & 1000V). Voltage and current could be output simultaneously and output DC power as well. Besides output, the input voltage (or current) can be measured simultaneously. It builds-in DC meter verification program to easy users.
High output stability: DC voltage, current output stability can reach 0.005% / min.
Wide output range: standard source output DC voltage range 0 mV-1100V
Standard source output DC current range: 0�µA-55A
Wide measurement range: measurement input DC voltage range 0mV-1100V
Measurement of the input DC current range: 0mA-55A
Support self-calibration: software self-calibration to the output input gear and does not need to open the case
Soft start: built-in soft start, preset load circuit,output from zero quickly rise to the set value, no impact on the load
Load protection: overload prompt, flow limit for about 4 seconds after the interception protection, to ensure the safety of the load
Human-PC Interaction: Large & colorful touch screen display and flexible setting to adjust the control source output parameters and easy to operate
