Find Verified Electric Power Meters Suppliers, Manufacturers and Wholesalers

6GHz intelligent radar level gauge is suitable for non-contact continuous measurement of liquid, slurry, granular and bulk materials. It is suitable for temperature, pressure change, inert gas and volatilization.

The measurement method of microwave pulse is adopted, and it can work normally in the range of industrial frequency band. Low beam energy, can be installed in a variety of metal, non-metal containers or pipes, no harm to the human body and the environment.

Application:Simple corrosive liquid in the process
Skyline:PTFE
Measuring range: 20 meters
Frequency range: 6.8GHz
Accuracy: 0.1%FS
Medium temperature: -40 to +130 °C
Process pressure: -0.10.3Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Thread
Protection level: IP67
Explosion-proof grade: Exia IIC T6 Ga

High Frequency Radar Level Meter

Design features:

Small antenna size, easy to install; non-contact radar, no wear, no pollution

Hardly affected by corrosion or foam; hardly affected by changes in water vapor, temperature and pressure in the atmosphere.

Severe dust environment has little influence on the work of high frequency level gauge.

Shorter wavelength, better reflection on inclined solid surfaces

The beam angle is small and the energy is concentra ted, which enhances the echo ability and helps to avoid the interference.

The measurement blind area is smaller, and good results can be obtained for small tank measurement.

High signal-to-noise ratio, even in the case of switching, can achieve better performance

High frequency is the best choice for measuring solid and low dielectric constant medium

Application: various corrosion liquid

Antenna material: PTFE

Measurement range: 10 m

Process connection: thread, Flange

Medium temperature: -40C --130

Process pressure:-0.1~0.3MPa

Accuracy: ±5mm

Power supply: 24VDC (two lines, four lines)

Protection grade: IP67

Frequency range: 26GHz

Explosion-proof grade: Exia C T6 Ga/ Exd ia IIC T6 Gb

Signal output: 4. 20mA/HART (two / four) RS485/Mod bus

Digital Gauss Meter various types - BRAND - VIJAYANTA, INDIA
1. Digital Gauss Meter (Range : 0 - 2 K Gauss , 0 - 20 K Gauss), Model: DGM 100
2. Digital Gauss Meter (Range : 2 KG to 20 KG), Model: DGM 100A
3. Digital Gauss Meter (Range : 2 KG & 20 KG, Interchangeable Hall Probe),
Model: DGM 202
4. Digital Gauss Meter (Range : 2 KG, 20 KG & 40 KG, with differential mode facility),
Model: DGM 103
5. Digital Gauss Meter (Range : 0.2 KG, 2 KG, 20 KG & 40 KG, Interchangeable Hall
Probe), Model: DGM 204

This instrument is developed and designed according to the national power industry standard DL/ t506-2007 "insulation gas humidity measurement method for sulfur hexafluoride electrical equipment" and adopts the imported high-precision dew point sensor and new digital circuit control technology. It is a high-precision intelligent instrument to measure the trace moisture content in SF6 gas.

This instrument adopts intelligent self-calibration technology wide measurement range fast response high accuracy good linearity dynamic display of measurement curve. At the same time the instrument also has an automatic dryer which can greatly reduce the measurement time.

Product nickname intelligent micro water meter micro water meter micro quality meter.

Designed to measure the winding resistance of transformers, Inductors, generators, motor windings, Tap Changers, Bus bar contacts Etc.

Features
- Built-in carry case for convenient portability
- available in current capacity 10AuP, 25AuP (additional cost) and 50AuP (additional cost)
- Simultaneous measurements of voltage & current
- Protection against inductive kickback & discharge

4 Terminal measuring device suitable for Resistance measurement of Copper conductors winding wires, Cables etc.

Features
- 1 micro Ohm to 199.99 Ohm measuring range
- 1 micro Ohm (at lowest range) resolution
- 3 1/2 digit LED display

Tank feeding bulk powder
Tank Loading Mass Flow Meter realizes quantitative and accurate loading and one-button operation of powdered bulk materials, greatly improves loading efficiency, saving labor costs and improves working environment. At the same time, combining with other intelligent automation devices, the bulk powder process is fully automated, which is a new type of environmentally-friendly quantitative loading equipment.
Applicable: cement, fly ash, mineral powder, alumina powder, calcium carbide powder, etc.
Accuracy: ±1.0%; Flow rate: 250~800m³/h
Product Features
1. Like a gas station, loading as required quantity;
2. One button to start loading automatically;
3. Since the release process is automatic and stable, accurate loading, the equipment can protect the environment and improve the working condition;
4. Height of 700mm is enough for installation, and the modification period is as short as 1-2 days;
5. It can be connected to Fengbo intelligent cloud service platform to realize early diagnosis, early warning, remote guidance and rapid maintenance.
There are more than 300 successful applications and a thousand sets are installed in the cement, power, and metallurgy industry.

3 Digit , 7 Segment LED Display
Voltage input

4 Digit , 7 Segment LED Display
Input 1Ã?? 2 Wire, Voltage and Current input
Primary CT Selection up to 50 Amps

Voltage and Current input
CT Selectable up to 4000/5
1 Relay for Set KW

Our STS prepaid electricity meter is certificated by STS association that is from South Africa. The meter is built-in prepayment algorithm, will cut off the power automatically if the credit in the meter be used up. And will reconnect automatically if the meter recharge for his meter. This kind of meter is very popular on the Africa and Asia, Nigeria, Tanzania, Ghana, Syria Indonesia, installing millions of STS keypad prepaid electricity meter.

Our STS prepaid electricity meter is certificated by STS association that is from South Africa. The meter is built-in prepayment algorithm, will cut off the power automatically if the credit in the meter be used up. And will reconnect automatically if the meter recharge for his meter. This kind of meter is very popular on the Africa and Asia, Nigeria, Tanzania, Ghana, Syria Indonesia, installing millions of STS keypad prepaid electricity meter.

We are distributors of Phase Scientific covid-19 test kits.

1. Phasify Viral RNA extraction kits - $600/ 100 reactions.
2. INDICAID - RAPID ANTIBODY TEST - $300/25 KITS PER BOX

2 in 1 meters measure average values of DC Voltage or DC Current. Any two different parameters can be measured in one case with this meter. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Analog Meters measure AC/DC Voltage or Current and frequency. These meters are installed on 35mm Din rail, the mounting width is 45mm and it is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

ML14xx is Multiload Monitor with 12 single phase load or 4 three phase load option. It measures important electrical parameters of multiple loads simultaneously in a single unit, eliminating the need and cost of multiple panel meters. It provides quick, easy and error free current connections with plug and play connectors. It measures real time electrical parameters like Active / Reactive / Apparent energy and power, current, THD, demand, max demand for each load. The instrument has 4 configurable relay outputs, which can be used for Limit / Pulse / Residual Current / 3Phase Load Health Monitoring / Tariff / RTC / Timer tripping or alarms. This instrument communicates with either MODBUS or Ethernet connection

Description
UT200+ series handheld automatic range true RMS clamp meter, designed according to safety standard EN61010-2010 CAT II600V/CAT III 300V grade, with full-function gear anti-burn protection, can meet high reliability and high safety operation requirements; It contains the basic functions of electrical measurement, with high precision measurement, and expands the current frequency (UT201+ / UT202+ only), high voltage frequency function, UT202+ has temperature measurement function, UT203+ has DC current measurement function, and the new design makes it An excellent measurement tool for electronic and electricians with superior performance
Features:
Large screen LCD display, fast ADC / analog to digital converter Full-featured false detection protection,
overvoltage, overcurrent alarm prompt True RMS;
voltage measurement 600V With high voltage frequency measurement AC current measurement function With current frequency measurement function (UT201+/UT202+UT202A+ only)
Temperature measurement function (UT202+/UT204+ only)
Capacitance measurement function (UT202+max 4mF/UT203+max 40mF/UT202A+/UT204+max 60mF) NCV electric field detection with sound and light alarm prompt;
LIVE live line measurement (UT202A+/UT204+ only)
Specification Range UT201+ UT202+ UT202A+ UT203+ UT204+
AC current (A) 400A (2%+10) (2%+10) (2.5%+5)
600A (2%+10) (2.5%+5)
AC current frequency (Hz) 50Hz~100Hz (1%+5) (1%+5) (1%+5)
DC current (A) 400A (2.5%+5)
600A (2.5%+5)
AC voltage (V) 600V  (0.8%+5) (0.8%+5) (0.8%+5) (0.8%+5) (0.8%+5)
AC voltage frequency(Hz) 10Hz~10kHz (1%+5) (1%+5) (1%+5)
10Hz~60kHz (0.5%+2) (0.5%+2)
DC voltage (A) 600V  (0.5%+2) (0.5%+2) (0.5%+2) (0.5%+2) (0.5%+2)
Resistance (�©) 40M�© (0.8%+2) (0.8%+2) (0.8%+2)
60M�© (0.8%+2) (0.8%+2)
Capacitance (F) 4mF (4%+5)
40mF (4%+5)
60mF (4%+5) (4%+5)
Temperature () -40~1000 (1.5%+5) (1.5%+5)
Frequency (Hz) 10Hz~10MHz (0.1%+4) (0.1%+4) (0.1%+4)
Features
Display count 4000 4000 6000 4000 6000
Auto range
Jaw opening 28mm 28mm 28mm 28mm 28mm
True RMS
NCV
Live wire test
Continuity test
Diode
MAX/MIN
Relative mode
Zero mode
Data hold
Low battery indication
Auto power off
General Characterisitics
Power 1.5V battery (R03) x 2(Not included for air shipping)
Display 37mm x 25mm
Product color Red and grey
Product net weight UT203+:235g
Product size 215mm x 63mm x 36mm
Standard accessories UT203+: test leads,
Standard individual packing Gift box, Carring bag, English manual

UNI T True RMS Digital Multimeter 6000Counts Auto/ Manual Range AC/DC Tester
UNI T True RMS Digital Multimeter UT15B /UT17B PRO 6000Counts Auto/ Manual Range AC/DC 1000V/10A Resistance Frequency Diode Frequency Diode Temperature VFC Tester Backlight Data hold Flashlight
UT15B PRO / UT17B PRO is a high-reliability true RMS digital multimeter.The product has a built-in VFC anti-jamming start mode, which can filter out the carrier frequency interference or distortion voltage signal superimposed by the sine wave, and stably measure the output voltage of the inverter. And equipped with a hand-automatic backlight induction self-starting function.
UT17B PRO has added frequency and duty cycle modes, which can switch frequency and duty measurement arbitrarily between DC / AC. It is also equipped with a temperature measurement function with a resolution of 0.1

The full range of functions of this series of products realizes the misdetection protection of up to 30KVA energy,
ensuring users are safer and more reliable in operation,and obtained CETLus certification according to the CAT III 1000V / CAT IV 600V safety level.

Features
1.6000 display digits / true effective value measurement range is wider

2. Large screen LCD display, easy to read data;

3.1000V AC / DC voltage measurement

4. VFC frequency conversion voltage measurement 600V (low pass) strong anti-interference;

5.LED flashlight, automatic induction backlight, to deal with dark environment

6.60M resistance measurement / 6000uF capacitance measurement

7.100kHz frequency / duty cycle (UT17B PRO only)
8. Temperature measurement (UT17B PRO only)

9. Diode / on / off beep

10. Manual / automatic range

11. Max / Min / Relative

12. Current gear protection: equipped with fused fuse 440mA / 11A 1000V fuse

13. Dangerous voltage warning function, easier to use

14. CAT III1000V / CAT IV600V safety level double insulation design.

Product overview
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.
The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000mm.

Product features
1. Simple installation, no need for professional workers
2. High precision and low price
3. Can work in humid and water-immersed environment