GF111B single phase reference energy meter with 100a clamp on ct is the latest product launched by our company after extensive visits to users and drawing on the advantages of similar products at domestic and abroad. The measurement part of the product adopts high-speed A D converter and DSP for digital processing technology, which greatly improves the accuracy and stability of measurement. The central processing part adopts 32-bit ARM embedded technology, which makes the instrument have novel interface, rich functions, clear and simple operation and stable performance. it has not only advantages of light weight, portable structure, high precision, high performance, powerful function, original interface, ease-to-use, but also work stability. It can measure U, I, P, Q, S, E, frequency, power factor, phase angle, harmonics etc. Accuracy class: 0.04.
The GF3000 series stationary three phase energy meter test bench is a fully automatic system that enables simultaneous, multi-position calibration and verification of three-phase electric energy meters error. Full compatibility with IEC 60736, excellent parameters, superior functionality and outstanding flexibility, It adopt the most advanced electronic measurement technique and modular concept combine the difference three phase reference standards and power amplifier. GF3000 three phase meter test equipment is applied in the measurement centre of grid company energy measurement department of power supply company and energy management utility, industrial enterprise and meter manufacturers.
The GF1000 series multi-positions single phase kWh meter test bench can measure mechanical meters, electronic mechanical meters and electricity meter error by the way of automatic, semi-automatic or manual operation. It composes of single phase programmable power source, high precision single phase reference energy meter, meter suspension test rack, Multi-channel server and precision clock source etc. GF1000 meter test bench is applied in the measurement centre of grid company energy measurement department of power supply company and energy management utility, industrial enterprise and meter manufacturers.
GF112B Single Phase kWh Meter Calibrator is suitable to test various types single phase kWh meters error on site and also can be used to test alternating current parameters - U, I, P, Q, S ,F, E etc.
GF112 handheld single phase watt-hour meter tester is with human oriented design, hand-held and lightweight. It is suit for electric power departments, measuring and quality examining departments and electric lab to field use. It is capable of testing various types single phase watt-hour meters on site and can also be used for testing alternating current parameters , for example U, I, P, Q, S, F, E etc.
GF312B2 portable three phase reference meter high accuracy 0.02%, with all kinds of optional clamp on ct and smart optical sampler. It can be applied in electrical laboratory or on site. it will be ensured by a combination of measures such as the use of 24bit A/D converter, DSP 32 bit ARM technology, a widely measuring range 600V/120A, adapted to typical test points of most recognized national metrological institutes. It can be as high precision three phase reference energy meter, also three phase portable meter calibrator, test ct pt ratio, burden etc.
GF312B portable three phase energy meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. And it also can be used as voltage, current and power meter to measure AC parameters of three phase power line. It can measure wave distortion factor and 2nd to 64nd harmonic wave. GF312B calibrator is used for grid corporation of measurement and energy test center, metrological service of power supply bureau, national energy measurement of testing authorities.
The instrument GF312D1 is a precision 0.05% AC energy meter testing instrument, mainly used to test three phase energy meter error on site, measure all various of AC parameters and CT ratio & phase error, it is also as three phase reference energy meter in the laboratory. Mainly using test single phase or three phase meter error on site. GF312D1 energy meter calibrator is an ideal test tool for the metrological service of electricity power company.
The GF6019D high precision DC energy meter test equipment consists of an DC voltage standard source, DC current standard source and DC power source. (up to 1150V/600A) and built-in DC electronic reference standard of accuracy class 0.05%. Characteristic features of the GF6019D are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 8 LCD-display. It can test DC energy meter basic error, starting test, creep test, error of time of day.
GF102 series portable single phase energy meter test bench used to test 1pc or 3pcs single phase energy meter or AC meter at same time. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output from 120A/600V. Widely used in lab and field, and then as single phase standard source. It is suite for electricity meter manufacturing enterprises, scientific research institutes, metrological service institutions, electric power companies etc.
GF1021 single phase portable energy meter test system used to test single phase energy meter error. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output. Widely used in lab and field, and then as single phase standard source. The portable meter test equipment offers high functionality combined with an excellent menu guided operation via coloured 7 touch screen or externally via interface.
Digital Voltage/Current Meter Dual Input & Display (96x48mm): Measuring dual channels (isolated) Voltage 0 100mV 600V and Current 0~199.99 10A for DC AC TRMS mixable. Mathematic function available for Addition Subtraction Multiplication Division high or low selector in 2 channels input in option. 4 relay can be multi-cross programmed individual to be a Hi Lo Hi Latch Lo Latch Go energized with Start Delay Hysteresis Energized & De-energized Delay functions, or to be a remote control. Analogue multi-cross selection output and RS 485 communication port in option
Energy management system Factory automation Intelligent power panel Industrial automation Power Grid automation Community power monitoring Intelligent green building
Multifunction Power Meter: CPM-12D is a din rail mounting multifunction power meter with high accuracy measurement for single phase and three-phase system. Measuring all basic parameters ; V, I, P, Q, kWh, kVarh etc.. 1 RS485 Modbus RTU communication port as default, LCD display in front panel with buttons for programming. Auto wiring change (see remark as below) via software CE and FCC approved Remark: Auto wiring change have certain condition limit, please refer to operation manual for further details. Â Applications Energy management system Factory automation Intelligent power panel Industrial automation Power Grid automation Community power monitoring Intelligent green building
AEM-DRB Multi-Circuit Power Meter (DIN rail) Because of the climate change and global warming crisis caused by excessive carbon dioxide emissions, energy conservation and carbon reduction have become an important issue for the protection of the planet and policy work that must be addressed; The EU also plans to set up a carbon economy model to tax carbon emissions and forcefully call for carbon reduction to protect the planet. Now is no longer facing the social responsibility of energy conservation and carbon reduction slogan, but the cost of market competitiveness impact. In response to this trend and customer power monitoring needs, ADTEK used high-performance advanced microprocessors and high-resolution fast sampling AD converters to design and develop AEM-DRB multi-loop power meters, combining the three advantages of small size, easy installation and reduced unit cost, and based on longterm customer experience, designed a number of innovative features to meet the diverse applications of different fields. The AEM-DRB series of multi-loop power meters are designed for multi-loop power measurement requirements. It has 2 independent and isolated main circuit inputs, up to 24 single phase or 8 three-phase circuits, and different circuit phase wires can be mixed and matched. It is suitable for diversified use in various power loop occasions,which greatly saves costs. It also has standard RS485 Modbus communication, input, output interface, LCD display,demand, TOU, data logging function and 2MB memory capacity. The second port of communication is also optional,which makes the application more diversified. Din rail mounting, compact and easy installation, programming through computer and push buttons easy to use.
High accuracy: It is a high sensitivity water meter that detects a little flow with R200 high accuracy. Anti-freezing: we solved the problem of freeze-break in winter by using unique internal design.
The main functions of this product include metering, display, communication, relay control, data encryption, enabling local and remote meter reading, meter operation monitoring and customer electricity consumption management. This product has the following advantages: DLMS/COSEM communication protocol, good interconnection and operability; Communication methods include infrared communication, RS485 communication, GPRS or PLC communication; Large-capacity data storage capacity, able to record related events such as electricity theft, power supply, switch-opening, and load profile data; Provide LCD display, support automatic display and key display function; Built-in relays, supporting multiple control modes, facilitating power safety and power management; Upgradable software for the meter base layer; Closed structure design, dustproof, waterproof and resistant to external damage.
GF1021 single phase portable energy meter test system used to test single phase energy meter error. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output. Widely used in lab and field, and then as single phase standard source. The portable meter test equipment offers high functionality combined with an excellent menu guided operation via coloured 7' touch screen or externally via interface.
GF102 series portable single phase energy meter test bench used to test 1pc or 3pcs single phase energy meter or AC meter at same time. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output from 120A/600V. Widely used in lab and field, and then as single phase standard source. It is suite for electricity meter manufacturing enterprises, scientific research institutes, metrological service institutions, electric power companies etc.
The GF302D3 portable three phase energy meter test bench consists of an integrated three phase 120A current source and 600V voltage source and a class 0.02 three phase electronic reference standard meter. The energy meter test bench is particularly designed for analysis of complete metering installations and local mains conditions. The meter test bench offers high functionality combined with an excellent menu guided operation via built-in thirty keys and colored 7" touch LCD-display. It can auto & manual test all kinds of energy meter error. Using on site or in the laboratory. It can preset a variety of test schemes for testing energy meter.
