Our China`s factory independent research and develop TICOVIS which is the best of portable power station and generator. If you`re going off the grid or prepping for an emergency, TICOVIS can keep your electronic gear running for hours or even days at a time. It`s roughly the same size and weight as a small microwave, and it provides a steady stream of power without the noise or exhaust of a gas-powered portable generator. After 73 hours spent testing 16 portable power stations, we found that the TICOVIS impressive max output, wide array of ports, easy-to-use interface, and rugged exterior helped it stand out from the competition.If you are interested our products, please contact us at any time.
Automatic lightning surge generator (Lightning surge immunity tester) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the IEC 61000-4-5, EN61000-4-5 and GB/T17626.5 standards. Specifications: Product Model SG61000-5SA SG61000-5SB SG61000-5 SG61000-5H-SP SG61000-5T Output Voltage (Open) 1.2/50�¼s�20% 1.2/50�¼s�20% 1.2/50�¼s�20% 1.2/50�¼s�20% 1.2/50�¼s�20% Output Current (Short) 8/20�¼s�20% 8/20�¼s�20% 8/20�¼s�20% 8/20�¼s�20% 8/20�¼s�20% Output Impedance 2�© and 12�© 2�© and 12�© 2�© and 12�© 2�© 12�© and 500�© 2�© and 12�© Output Voltage Range 0~4.8KV�10% 0~4.8KV�10% 0~6KV�10% 0~10KV�10% 0~6KV�10% Output Current Range 0~2.4KA�10% 0~2.4KA�10% 0~3KA�10% 0~5KA�10% 0~3KA�10% Surge Repetition 1~9999 times 1~9999 times 1~9999 times 1~9999 times 1~9999 times Interval Time 20~9999s 20~9999s 20~9999s 30~9999s 20~9999s Polarity Positive, Negative or Positive/Negative automatic Phase Shift Asynchronous, Synchronization 0�~ 360� or Specific Angle Special Function N/A Built-in surge voltage and current probe (1000:1), connect with LISUN OSP1102 directly Operation Way Button Input Touch screen with super big LCD and built-in Windows CE Dimensions (WxDxH) 44x45x35cm 44x45x35cm 44x45x35cm 56x69x155cm 44x45x55cm Gross Weight About 30kg About 30kg About 30kg About 270kg About 48kg Coupling/Decoupling Network (CDN) Includes a 16A single phase CDN Includes a 20A 3phases CDN Isolution Transformer for EUT (Option) LISUN ITEU-SP4K (220V Single phase) or ITUS-SP2K (110V) Remark: 12KV, 15KV, 20KV and more higer voltage Surge Generator can be designed according to customer request. 6KV Short Circuit Current Output Waveform (780:1) 6KV Open Circuit Voltage Output Waveform (1000:1)
Product description The impulse voltage generator intelligent measurement and control system is the latest programmable control system and consists of two parts: Automatic control of pulse voltage generator program and automatic analysis of pulse signal measurement. The General Conditions of Use Altitude: 1000m Ambient temperature: -5 40 Relative humidity: 90 20 Use of the environment: indoor Non-conductive dust Grounding resistance 0.5 No fire or explosion hazard Earthquake resistance: 8 magnitude There is no gas that corrodes metal and insulates Impulse voltage generator (2) Supply voltage waveform is the actual sine wave, waveform distortion rate 85% (more than 90% when no load 300PF); (2)Truncated wave: cut-off time (2-6) 10% s, zero-crossing coefficient 0.3% (3)Standard operating impulse voltage wave 250 20% s / 2500 60% s, The impulse voltage waveform parameters and their deviations are in line with the requirements of the national GB311 and GB16927 standards. 7, the lowest output voltage is greater than 10% of the nominal voltage 8. Duration of use: Above 70% of rated voltage, it can be continuously operated every 120 seconds after charging and discharging. It can be continuously operated after charging and discharging every 60 seconds under 70% of rated voltage. One computer is used for control and waveform analysis 18-inch LCD monitor, strong anti-interference and long life WINDOWS XP, OFFICE 2003, LabVIEW related driver software, ACE measurement and control software package,built in
Products Introduction Ultra-low frequency dielectric strength testing is another method of power frequency withstand voltage testing, because large-capacity testing is required, and large-scale equipment is not only expensive, but also bulky. The power department did some tests to solve these problems. According to domestic and foreign tests, this product can solve this problem. Not only the size of the instrument is small, but the weight is greatly reduced. Precautions When carrying out 35KV cable test, one-phase test is strongly suggested. Voltage is set to 60KV (General Requirements)-78KV (according to the rules needed) and the frequency is set to 0.1Hz, 0.05Hz,0.02Hz and 0.01Hz. The manual said load capacity is the theoretical value, the scene 35KV cable length can reach 3-15 km. In case the cable is too short(less than 500 meters), the capacitance of the test object is smaller than 0.1 F and the pressure cannot be normally boosted, please connect 0.1 F high-voltage capacitance in parallel way. Keep high-voltage terminals nylon spin by the above numbers to the corresponding nylon seat, high-voltage lines to ensure good contact , no contact is good , it will cause a discharge , burned the high side . When nylon terminals tightened, pay attention to the intensity, excessive tightening may damage the nylon terminals. 80KV 0.1HZ VLF high voltage generator Model Rated Voltages Load capacity Fuse Weight Useful VLF-80 80kV (peak ) 25A
Product description The impulse voltage generator intelligent measurement and control system is the latest programmable control system and consists of two parts: Automatic control of pulse voltage generator program and automatic analysis of pulse signal measurement. The General Conditions of Use Altitude: 1000m Ambient temperature: 5 40 Relative humidity: 90 20 Use of the environment: indoor Non-conductive dust Grounding resistance 0.5 No fire or explosion hazard Earthquake resistance: 8 magnitude There is no gas that corrodes metal and insulates Impulse voltage generator (2) Supply voltage waveform is the actual sine wave, waveform distortion rate 85% (more than 90% when no load 300PF); (2)Truncated wave: cut-off time (2-6) 10% , zero-crossing coefficient 0.3% (3)Standard operating impulse voltage wave 250 20% s / 2500 60% s, The impulse voltage waveform parameters and their deviations are in line with the requirements of the national GB311 and GB16927 standards.
Products Introduction Very Low Frequency high voltage generator 30KV combines advanced technologies such as modern digital conversion, full computer control, automatic voltage increase, voltage reduction, measurement and protection. In the automatic upgrade process, human intervention can be taken care of. The main advantages include full electronics, small size, light weight, large-screen LCD display (clear and intuitive), printer output test report, and easy use. Technical Parameter
Product description The impulse voltage generator intelligent measurement and control system is the latest programmable control system and consists of two parts: Automatic control of pulse voltage generator program and automatic analysis of pulse signal measurement. The General Conditions of Use Altitude: 1000m Ambient temperature: -5 40 Relative humidity: 90 20 Use of the environment: indoor Non-conductive dust Grounding resistance 0.5 No fire or explosion hazard Earthquake resistance: 8 magnitude There is no gas that corrodes metal and insulates Impulse voltage generator (2) Supply voltage waveform is the actual sine wave, waveform distortion rate 85% (more than 90% when no load 300PF); (2)Truncated wave: cut-off time (2-6) 10% , zero-crossing coefficient 0.3% (3)Standard operating impulse voltage wave 250 20% s 2500 60% s,
Products Introduction VLF high voltage generator 60KV.The capacity of it is 1/500 of tradition way. Greatly simplify testing procedures, That is why commonly used in the developed , s ministry of electric power entrust Wuhan high voltage research institute to drafting 35Kv and below XLPE insulated power cable ultra-low frequency (0.1Hz) voltage withstand test methods for promoting this approach. The instrument is developed according to made of this need. It can be widely used in cable, large-scale high-pressure rotary motor, power capacitors into AC voltage withstand test. Power capacitance of single-core XLPE insulated cable (F/km) 0.1Hz -60KV Ultra-Low Frequency High Voltage Generator Model Rated Voltages Load capacity Fuse Weight Useful VLF-60 60kV (peak ) 0.1Hz,0.5F 25A Control 6 HV TANK-30 HV TANK-II33 25KV and below the cable
Product description The impulse voltage generator intelligent measurement and control system is the latest programmable control system and consists of two parts Automatic control of pulse voltage generator program and automatic analysis of pulse signal measurement. The General Conditions of Use Altitude 1000m Ambient temperature 5 40 Relative humidity 90 20 Use of the environment indoor Non conductive dust Grounding resistance 0.5 No fire or explosion hazard Earthquake resistance 8 magnitude There is no gas that corrodes metal and insulates Impulse voltage generator 2 Supply voltage waveform is the actual sine wave, waveform distortion rate 85 more than 90 when no load 300PF 2 Truncated wave cut-off time 2-6 10 s, zerocrossing coefficient 0.3
TPS ( Tide Power System,China ) Biomass gas generator set was powered by China high quality Biomass gas / Syngas / Synthetic gas engine. This series gas engine is medium speed which reduce engine wear, and is more tolerant with gas compositions because of its Naturally Aspirated Induction system ( No Turbocharger and Intercooler ). TPS Biomass gas / syngas generator set is fueled by Combustion Gasified Gas from abandoned wood chips, rice straw, weeds algae etc, Similar like CAT G3516C syngas genset. We turn Waste to Wealth, try our best to contribute to Recycling Economy and Environmental protection. Gas Genset Output: 400kw-1100kw Gas Engine Series: TBG6L, TBG8L, TBG9L Alternator: Leroy Somer, Siemens Control Panel: Comap, Deepsea, Harsen HZ&RPM: 50HZ&60HZ, 500/600/750RPM& 514/600/720RPM Acceptable Gas: heat value=4MJ/Nm3, Combustion Biomass Gas, Syngas, Synthetic natural gas, Gas CO, Gas H2, Coal Gasified Gas, Combustion Gasified Gas from wood chips, crops, rice straws, husk, weeds algae etc.
Switzerland Liebherr Biogas generator set : 132KW-560KW, G934, G944, G946, G9508, G9512 Applicable Gas : Natural gas generator set, Biogas generator set, LPG generator set ,Landfill gas power plant, Coal mine gas generator, coke oven gas generator, low calorie gas generator, Oil field gas genset, Shale gas generator, Syngas generator, biomass gas generator, wood gas generator, rice husk gas generator set, Pyrolysis Gas generator set, Hydrogen gas generator set, Hydrogen power gas generator, palm kernel shell syngas generator set, PKS gas generator set Applicable Range: gas power plant, BOO power plant, BOT power plant, EPC power plant, POME power plant, CHP / Cogeneration of Heat and Power with Heat Exchanger to generate hot water or vapor, CCHP/Trigeneration of cold, heat and power, CCHP system with Broad Chiller---lithium bromide chiller (absorption-type Chiller ).
1.Warranty:3 Months-1 Years 2.Capacity:5000Wh/51.2V/100Ah/100000mA 3.Battery Type: Lithium iron phosphate (LiFePo4); 4.Output Voltage (V):110/220V; 5.Cycle life:2000+; 6.Built-in inverter:Pure sine wave inverter; 7.Protection including: Shortcircuit, Overload, Over temperature proof etc., 8.OEM/ODM:Yes 9.Grid Type:Off-grid 10.Net weight:52kg/115 lbs 11.Controller Type:Built-in Controler 12.Mounting Type:portable 13.Load Power (W):4kW 14.Output Frequency:50/60Hz
FEB 3000M portable solar generator 1.Battery Type: Lithium iron phosphate (LiFePo4); 2.Capacity: 3000Wh/51.2V/60Ah/60000mA ; 3.Output Voltage (V):110/220V; 4.Cycle life:2000+; 5.Built-in inverter:Pure sine wave inverter; 6.Power:3000W Rated / 6000W Peak; 7.Multiple ports 2 USB;1 Type-C; 2 AC output; 8.Protection including: Shortcircuit, Overload, Over temperature proof etc., 9.Warranty:3 Months-1 Years
The integrated skid-mounted ozone generator system combines PLC,The integrated equipment of intelligent variable frequency pulse power supply and plate discharge body.The product optimizes the layout of equipment and pipelines, has small space requirements, high integration, and is easy to install.The skid-mounted ozone generator system is finalized and quantitatively produced in advance,With sufficient inventory and stable transportation channels, the delivery speed is fast and the lead time is short.
Citypower Ozone generator. 1) The large-scale ozone generator (1kg/h-150kg/h), producing Typy: *Cabinet type ozone generator, *Container integrated ozone generator device and supply for ozone systemic design and fix according to client requirement. We can often supply for skill service and training service and fitting for our customer. 2)large-scale ozone generator -oxygen supplier and PSA air source series. 3)Ozone generator technical parameters. *Ozone Outputï¼?(1kgO3/h-150kgO3/h)(Customized) *Ozone Concentration: 110-150 mg/L(Adjustable) *Power source: 380V/3ph/50Hz, *Output voltage: 6kv(Adjustable) *Operating frequency: 1-20kHz ï¼?Intelligent or manual adjustmentï¼? *Supplier dew point: 90%
Products Introduction The power department did some tests to solve some problems. According to theories and test results at home and abroad, the 50KV Very Low Frequency high voltage generator withstand voltage test can solve this problem. Its advantages are that not only the test results are the same, but the instrument size is small and the weight is greatly reduced. output rated voltage power fuse Refer to the following table Model Rated Voltages Load capacity Fuse Weight Useful VLF-50 50kV (peak ) 0.1Hz,â?¤1.1�µF 20A
* Used Cummins KTA 50 1620 KVA Generator #01 used Hours: 690 Hrs #02 used Hours 780 Hrs Duel fuel: Diesel OR Glycerine GROSS WEIGHT: 30,480 KGS ALLOW STACK WT. 1.8G: 192,000KG RACKING TEST LOAD VALUE: 15240 KG. TARE WEIGHT: 4,150 KGS PAYLOAD: 21,850 KGS
The impulse voltage generator intelligent measurement and control system is the latest programmable control system and consists of two parts: Automatic control of pulse voltage generator program and automatic analysis of pulse signal measurement. The General Conditions of Use Altitude: 1000m Ambient temperature: -5 ~ +40 Relative humidity: 900 Use of the environment: indoor Non-conductive dust Grounding resistance < 0.5 �© No fire or explosion hazard Earthquake resistance: 8 magnitude There is no gas that corrodes metal and insulates
Description: Portable Medical Oxygen Molecular Sieve is high-efficiency oxygen molecular sieve of X-type molecular sieve(pore diameter:10 angstroms). It is suitable for household and medical oxygen generator with PSA. It has good selectivity of N2/O2. Easily desorption. Technical Parameter: Properties Unit Bead Diameter mm 0.4-0.8 1.6-2.8 Bulk density g/ml 0.62 0.62 Crushing strength N/pce / 30.0 N2 Capacity (1 bar,25) ml/g 8.0 8.0 N2/O2 Selectivity (1 bar,25) - 3.0 3.0 Particle Ration wt% 95.0 97.0 Attrition wt% 0.30 0.30 Static H2O capacity (RH=60%,25) wt% 30.0 30.0 Static CO2 capacity (250mmHg,25) wt% 19.8 19.8 Loss on Ignition (575,1hr) wt% 1.0 1.0 Application: PSA industrial oxygen production and medical center oxygen supply system
2000KVA GERATOR SET. MAKER CUMMINS. YEAR : 2006. OPERATING HOUR : 99.
