Y, y2 three phase induction motor The structure of completeclosed, self-cooling fan and squirrel cage typed is suitable for the usage under bad environment.
Wate spray fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity:Ground): 38 L (13) Jet distance: 8 m (14) G.W: 28.8KG; CBM: 0.20M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Shotgun Caliber:18.4mm Overall length: 923/688mm Barrel length: 425mm Overall weight: 3.15kg Effective range: 50m Magazin capacity: 5rounds Chamber pressure: 3000rounds
Electric motor As a professional manufacturer from china since 1997, we have export our products to more than sixty countries and averagely deliver more than thirty 20'gp containers per month. And with Good quality Excellent after-sales services Favorable price Powerful r&d ability, we believe we would achieve more. Totally enclosed and fan-cooled; In conformity with iec standard; High efficiency; Low noise; High start torque; Excellent overload performance; Suitable for combustible, explosive or corrosive gas environment; Following series are also available: Y2, yl, yc, jy; Aluminum housing series: Ms, mc, ml, my;
Tubular motor (wss50) Standard type Ac. Compact structure, the special design of gearbox supply balanced running, low noise, widely used in electronic screen, roller awning, roller guard against theft curtains and roller garage door. Technical datas: wss50/10 Nominal torque(nm): 10 Tube diameter(mm): 45 Nominal consumption(w): 140/160 Nominal voltage(v): 230/110 Nominal current(a): 0.60/1.26 for 13rpm; 074/1.55 for 17rpm Output speed(r/min): 13/17 Frequency(hz): 50hz/60hz Running time(min): 4min Thermal protector(c): 130 Protection index: ip44 Net weight(kg): 2.15kg Total length(mm): 550 Maximum turns(turn): 40 Cable length(mm): 2000 Technical datas: wss50/20 Nominal torque(nm): 20 Tube diameter(mm): 45 Nominal consumption(w): 160/220 Nominal voltage(v): 230/110 Nominal current(a): 0.74/1.55for 13rpm; 0.95/1.99 for 17rpm Output speed(r/min): 13/17 Frequency(hz): 50 Running time(min): 4 Thermal protector(c): 130 Protection index: ip44 Net weight(kg): 2.15 Total length(mm): 570 Maximum turns(turn): 40 Cable length(mm): 2000 Carton with foam inside
NEMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start. Standard lot size , weight , dimensions
Permanent magnet DC motor(ETC) Fan Model: Belt drive all Phase / Voltage / Hz: 1/115/208-230V Poles: 4 HP (KW): From 1/74-1/10 Voltage: 12/24/110/120/220 v Insulation Class: B Speeds / RPM: 1 Speed (1800) Capacitor: Cap Start Induction Run Bearings: Ball/ball Enclosed/Open Frame: Open dripproof Rotation: CW/CCW Auto Thermal Protection : UL S&P USA Part Code 605262 Current Supplier Marathon/B311 More technical datas, pls contact us and we will show you at once. Standard Lot Size , Weight , Dimensions
This series motors are of remarkable features, such as compact construction, light weight, attractive appearance, safe and reliable operation, long operation life, excellent performance and easy maintenance. For this series motors, the output ratings and mounting dimensions conform to the specifications of IEC standards and the correlation between them basically agrees with EIN42673. The motors are easy to complete with export machinery and equipment and to supply as spare accessories in the import equipment. This series motors are designed and manufactured into flameproof type and the flameproof property conforms to China National Standards: GB3836.1-2000 Electrical Apparatus for Explosive Gas Atmospheres-General Requirements. GB3836.2-2000 Electrical Apparatus for Explosive Gas Atmospheres- Flameproof Enclosure d and standards IEC79-1, BS4683 and EN50018. The explosion protection marks are Exd I, Exd II AT4 and Exd II BT4. They are safe to use in the locations where there are explosive mixtures. Of gas- and vapor-air. ExdI- safe for use in the non-mining surfaces of underground coal mines where the explosive mixtures of methane or coal-dust are present. ExdIIAT4 - safe for use in plants where the explosive mixtures of IIA Class, TI, T2, T3 orT4 are present. ExIIBT4 - safe for use in plants where the explosive mixtures of IIB Class, TI, T2, T3 orT4 are present. ExdIICT4 - safe for use in plants where the explosive mixtures of IIC Class, TI, T2, T3 or T4 are present. Based on series YB2 motors, the motors can also be manufactured for special environments, such as outdoor locations (YB2-W type), indoor tropical humidity (YB2-TH type), outdoortropical humidity (YB2-WTH type), indoor tropical arid (YB2-TA type), outdoor tropical arid (YB2-WTA type), indoor tropical (YB2-T type), outdoor tropical (YB2-WT type) and outdoormiddle-class-chemical corrosion locations (YB2-WF1 type). Standard Lot Size , Weight , Dimensions
Electric motor Wooden cage
Y series three-phase induction motor Y series motor is totally enclosed and fan-cooling, three-phase squirrel cage induction motor, that is newly designed in conformity with the relevant requirements of IEC standards. Y series motors have outstanding performance, such as high efficiency, energy-saving, high starting torque, low noise, little vibration, reliable operation and easy maintenance, etc. Y series motors are widely used in many places, where there doesn't exist combustible, explosive or corrosive gas, and without any special requirements, such as machine tools, pumps, fans, transport machinery, mixer, agriculture machinery and food machines, etc. Any requirement, please feel free to contact me, we can make products according your specs and supply the competition price.
Y2 series three-phase induction motors, deveploped with new techniques, are renewal and upgrading products of Y series. Y2 series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact structure, low noise, high efficiency, large torque, excellent starting performance, easy serving, ect. The motors are adopted with F class insulation and designed with assessing method for insulation system according to intermational practice, it enhances greatly motor's safely and reliability, therefore, these motor's have reached an international advanced level of the such kind products at the initial days of the 90s. Y2 series motors can be widely used as driving equipments of various machineries, such as, machine tools, blowers, pumps, compressors, transporters, agricultural and food processing. Operating Conditions Ambient temperature: -15celsius
YC series heavy-duty single-phase motors are suitable for powering small type machine tools and water pumps, specially for family workshops where only single-phase current supply is available. Motors of the series are integrated with up-to-date design, built with the best quality materials and possess the features of pleasant-looking appearance, outstanding performance, easy maintenance and reliable running. The designations, signs and nominal values are all in conformity with I. E. C. Standards. YC series protected motors are of IP44 totally enclosed fan-cooling type. Rated output is 3Hp or below with capacitor starting. Under rated voltage and 50Hz, the starting torque is three times more than the rated torque and 60Hz is more than 2. 75 times. Motors for 4Hp over are of capacitor start and run type. They all concentrate the advantages of high starting torque, smooth running, low temperature rise, low noise and greater overload performance. Any requirements, please feel free to contact with us, we can make products according your specs and supply the competition price.
5% rated voltage Ambient temperature up to +40centigrade Installation altitude up to 1000 meters above sea level STRUCTURAL CHARACTERISTICS Dynamically balanced MOTOR SHAFT with double-shielded life-lubricated bearings(working life more than 5,000 hours). Open and self-ventilated induction MOTOR,designed for continuous duty. -The stator pack in made of low-leakage magnetic laminations(2.63 Watt/kg). -Stator windings are manufactured using wire with double class H insulation;heads carefully bound and shaped by pressure. Lmpregnation is done in a continuous cycle by PREHEATING-IMMERSION BAKING with extremely pure ideally-polyester resin, motors insulation is class B. This gives a high quality winding with excellent insulation and heat transmission properties. -The rotor is the squirrel-cage type. -The capacitor is supplied as standard. -Surface protection of the electric motor assembly is achieved by a complete treatment cycle, including rust-proofing,pickling,phosphatizing,passivation,two coat paint finish applied by and electrostatic process and oven baked. NAME PLATE showing all the main electrical and mechanical characteristics and electrical connection diagram. PROTECTION IP 23. OPERATION VOLTAGE: motors are available in stock for single-phase 230 Volt power supply. Other voltages are available on request. Motors are designed to accept maximum 5% mains voltage variations with respect to rated values. FREQUENCY: motors are available in stock for 50Hz frequency. Motors for 60Hz frequencies are available on request. Any requirements, please feel free to contact with us, we can make products according your specs and supply the competition price.
XNYC-RS series single phase resistance start steel housing motor, with over-load protector inside)hand-reset), equipped with three-core socket cable and swtich, it is mainly used in the places that have larger starting torque request butno need full load start. Its performance is acted between capacitor start motor and capacitor run motor. It is sepcially suitable for fan machine, wter pump etc small mechanical equipment. It have good features of low noise, low vibration. It is open type motor. Any requirements, please feel free to contact with us, we can make products according your specs and supply the competition price.
Features: 1) max. Capacity: 1500ml 2) power: 110 - 240v ac, 50 - 60hz, 300w 3) includes juice extractor, blender with filter, meat chopper and Grinder 4) stainless steel filter and blade 5) automatic removal 6) juice extraction, soy-bean milk production, blending, grinding and Chopping functions
Varm gear motor
Vibration motor
Variable speed drive
Gear motor
Single phased universal motors Single-phased universal motors are used for hair dryers, water heaters, coffee grinders, electric knives, egg mixers, juice extractors and other food processors. These motors possess high torque, low vibration and interference.
