The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80vdc
Suitable for-2-phase and 4-phase motors
Output current up to 5.86a
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200khz
Automatic idle-current reduction
Small size (107*97*48), weight:1kg
The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
Supply voltage up to +45vdc
Output current up to 5.86a
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200khz
Dip switch current setting 8 different values
Small size (122.2*90*33), weight:0.3kg
Mechanical dimension & rated power:
Frames Size Rated Power
60cm X 60cm 200-600 W
80cm X 80cm 400-1,000 W
90cm X 90cm 750-1,000 W
110cm X 110cm 600-1,800 W
130cm X 130cm 1,000-3,800 W
180cm X 180cm 2,700-4,500 W
For more information, please be free to contact us for detailed PDF datasheets.
Y series motor is a kind of low-voltage three phase asynchronous motor, which is a basic series for general
applications.
This series can meet requirements for general application international standard with frame range 80-135.
Y series has the advantages of high efficiency, energy saving, high operational performance, small vibration,
low noise, long life, high reliability, etc.
Installation dimension and power grade completely conform to IEC standard.
It employs Grade B insulation, IP44 grade for shell protection and IC411 cooling mode.
The rated voltage and frequency of Y series are 380V, 400V, 415V, 440V, and 50Hz, 60Hz.
Y series asynchronous motor is widely applied for machinery and equipments without special requirements,
such as agricultural machinery, food machinery, fan, agitator and air compressor, etc.
For more information, please be free to conact us for detailed PDF files.
Y2 series induction motors, developed with new technology are renewal and upgraded products of Y series.
Y2 series motors are defined as totally enclosed, fan cooled, squirrel cage type and noted for ití»s design,
excellent appearance, compact structure, low noise, high efficiency, large starting torque, excellent starting
performance, easy maintenance, etc.
The motors are adopted with F class insulation and designed with assessing method for insulation system
according to international practice.
Y2 series motors are widely used in various machinery and equipments, driving equipments etc. Such as
machine tools, blower, pumps, compressors, transporters, agricultural
and food processing machinery
Work environment
Ambient temperature: -15íµ~40íµ
Altitude: Not exceed 1000 meters
Rated voltage: 380V
Rated frequency: 50Hz
Connection: Y start-connection for 3 KW and below,
Delta-connection for 3 KW or more
Duty: S1
Insulation degree: F
Cooling method: IC411
Protection: The main body of motor reach IP54; the terminal connection box reach IP55
For more information, please be free to conact us for detailed PDF files.
.
Standard package
Z4 Series DC motor is our latest products, widely used as a source of transmission of various types of machinery, metallurgical industry, such as mill drive, metal-cutting machine tools, paper, printing, textile, printing and dyeing, cement, plastics extrusion machinery and so on.
The appearance of this series of electrical installation in addition to the size of the two-hole lead at the end of inter-axial size "B", in line with international standards IEC72.
This series of motor performance and technical requirements in accordance with International Electrotechnical Commission standard, IEC34-1 West Germany or the requirements of national standards DIN57530 examination.
This series of motors used polygonal structure, high utilization of space. To conjugate Stator MAGNETIC-laminated, the application of power rectifiers, can withstand the current pulse with the dramatic changes in the current (changes in the load) of the condition. Equipped with precision magnetic pole position for a result to the good.
Electrical insulation level for the F-class, reliable insulation structure and impregnation process, to ensure stability and good insulating properties of heat.
This series has a small motor, a good performance, light weight, output power, high efficiency and high reliability, with the current international advanced level of motor strength.
Three-phase motors can be used full-bridge rectifier power control, as well as external-wave reactor and the long-term work. Rated voltage of 160V single-phase motors by the bridge power supply, now have to access armature circuit reactor to contain the pulse of current.
BPY series three-phase AC induction motor Frequency is the company's products absorb foreign technology, extensive research and the collection of information at home and abroad on the basis of the successful development of the latest products,It has low noise, vibration small, wide speed range, reliable operation, easy maintenance, etc., at home and abroad with various types of devices supporting the use of frequency, energy conservation and contribute to the realization of automatic control.
VB series vibrating motor is the universal vibrating source for various electric vibrating machines, such as vibrating feeder, vibrating conveyer, vibrating ore drawing machine, vibrating shake-out machine, vibrating screen classifier, hopper wall vibrator of the storage hopper, vibrating platform, etc.
Our VB series of vibration motors sell well on markets at home and they have been exported to Europe, Japan, Southeast Asia, etc. We ever achieved the silver medal of the National Spark Program Achievement Applicable Exhibition, Provincial Prize for Quality Product, Provincial Prize in Science and Technology, Provincial Prize(Golden Crane Prize) for New Quality Product, Provincial Prize for Energy-Conserving Product, and so on.
Applications:
Electricity/Gas, building materials, coal industry, mine, chemical industry,light industry,casting, metallurgy, grain industry, fire-resisting industry, etc.
Features:
1, The vibration (exciting force) is compatible with the rating appropriately,with a low-weight and small machine body;
2, With merits of low noise and energy-saving owing to vibrating caused by gentle and stable turning;
3, Full enclosed structure, can be applied to any dusty circumstances which has no special explosion-proof requirements;
4, With a long working life, among which the bearing working life of the two-stage reaches 5000 times, while the 4,6,8 stages no less than 12000 hours;
5, The vibration(exciting force) can be adjusted only by modifying the angle of the eccentric block;
6, Multiple vibrators can be grouped up to meet different mining requirements;
7, The vibrating motor with globally max exciting force was born in our factory;
Working conditions:
Environmental temperature: Less than 40
Altitude: No more than 1000 meters
Power: 380 V, 660 V
Frequency: 50HZ/60HZ
Insulation grade: B grade
Operation mode: Continuous (S1)
Install method: Any direction
Protection Level: IP54.
1.Technical Parameters :
Rated power:from 3w to 45w
Rated Voltage:110v/220v/230v/240v
Frequency:50Hz/60Hz
Rotation Speed :from 800 rpm to 1450 rpm
2.The motors can be customized according to the different voltage, frequency, power and rotation speed.
1.SUIT FOR : 1P, 1.5P, 2 outdoor air conditioner
2.Technical Parameters :
Related of Voltage:110v/220v/230v/240v
Frequency:50Hz/60Hz
Output Power:from 15w to 80w
Rotation Speed: from700 rpm to 1400rpm
3.The motors can be customized according to the different voltage, frequency, power and rotation speed.
Etonm motor entered dc motor industry since 2001, designed and developed series of dc gear motor, there are et-sgm12, et-sgm16, et-sgm20, et-sgm25, et-sgm27, et-sgm37, every series has several types.
