Application:
Ms series three phase induction motors are newly designed based on series y motor and generaly purpose low voltage three phase induction motors of basic series. As compared with series y series, the ms series motors feature are high efficiency and starting torque.
Ms series are generally purpose motors suitable for common working environment and machinery without special requirement, like air-compressor, pump, fan, medical apparatus and instruments, small machines etc. Ms motor can be equipped with ptc.
Willda brief introduction:
Willda factory is the professional ac motor manufacturer and exporter,
Single phase: mc/ml/ my/yc/yl series
Three phase: aeef/y/y2/ms/russia gost series.
If you are interested in it, welcome to email us or call us freely.
I) 112 frame or below: packed by carton firstly, then packed by plywood pallet together
Ii) 132 frame or above: packed by plywood/wooden pallet seperately
Y2 series three-phase electrical motor is specially designed for european market, whose terminal box is located on the top. This motor has a very compact structure and attractive appearance. The sizes and mounting dimensions are produced according to the iec standard. The motor has some good features, such as high efficiency, energy-saving, high starting torque and easy maintenance.
We can also supply aluminum housing type for frame size below iec132.
Operating conditions
Ambient temperature: -15¡¨¹ ¡¨¹ 40
Altitude: altitude should be lower than 1000meters above sea level.
Rated voltage: 380v rated frequency: 50hz
Connection: star-connection for 3kw or less whereas delta-connection for 4kw or more.
Duty/rating: continuous (s1).
Insulation class: f, the temperature rise of the stator winding is examined at 80k (by resistance method).
Protection class: the main body of the motor is ip54
Cooling method: ic411.
Willda factory is the professional ac motor manufacturer and exporter,
Single phase: mc/ml/ my/yc/yl series
Three phase: aeef/y/y2/ms/russia gost/nema series
If you are interested in it, welcome to email us or call us freely.
I) 112 frame or below: packed by carton firstly, then packed by plywood pallet together
Ii) 132 frame or above: packed by plywood/wooden pallet seperately
Dg61 series gear motor gear box features:
1) voltage range: 12 vdc - 36 vdc
2) steel casing diameter: 82 mm
3) the load speed range: 80 rpm to 300 rpm
4) the load output power: 80 w to 600 w
5) motor use: electric wheelchair, scooter and so on fitness equipment
Dg61 series gear motor gear box features:
1) voltage range: 12 vdc - 36 vdc
2) steel casing diameter: 82 mm
3) the load speed range: 80 rpm to 300 rpm
4) the load output power: 80 w to 600 w
5) motor use: electric wheelchair, scooter and so on fitness equipment
Laying equal emphasis on detail & work, these motors serve the desired purpose with utmost workmanship.
Our range of Electric Motors includes:
Single Phase
Tefc
Spdp
Slip ring
Flameproof
Energy Efficient (Level 2 & Level 1)
With our vast experience in traction motor market, seeking independent innovation and applying ac variable frequency speed control technology, we designed, tested and manufactured ranges of traction motor with frequency inverters, such as yvf series, ybvf series, ytvf series, and we also provides ranges of dc traction motor, such as zq series and zqb series.
Applications
As the prime power unit, our products are designed and manufactured to meet the typical requirements of a variety of applications in both narrow and standard gage railway transportation systems of metallurgy, mining, lumbering, railway and subway.
The wide range of our motor platforms can be custom engineered to meet the power, size, efficiency, the force/torque requirements and integration needs of the customer's application.
Features
Our motors offer reliable and consistent performance while offering a high level feature set. Listed below are just some of our motor features:
Widely variable speed range
Large drawing force
High overload capacity
Convenient maintenance
Remarkable energy saving
Introduction
With our vast experience in traction motor market, seeking independent innovation and applying ac variable frequency speed control technology, we designed, tested and manufactured ranges of traction motor with frequency inverters, such as yvf series, ybvf series, ytvf series, and we also provides ranges of dc traction motor, such as zq series and zqb series.
Applications
As the prime power unit, our products are designed and manufactured to meet the typical requirements of a variety of applications in both narrow and standard gage railway transportation systems of metallurgy, mining, lumbering, railway and subway.
The wide range of our motor platforms can be custom engineered to meet the power, size, efficiency, the force/torque requirements and integration needs of the customer's application.
Carriage dimension 1400 x 950 mm
Size 2850*950*1100mm
Voltage 48v
Unladen weight 180 kg(without the roof and battery)
Loading capacity 400 kg
Max range 55km
Charging time 6h ~ 8h
Max speed 35km/h(20km/h on shown )
Rear axle dirrectly connect
Brake drum brake
Motor size:
1. Stator diameter: 84mm
2. Shaft diameter: 5mm
3. Shaft length: as your request
4. Lead wire or terminal are both available
5. Number of pole: 2 poles
6. Rotation: cw/ccw
Application:
1. It is used commonly euro range hoods, slim range hoods. Etc
2. Safe and reliable, low noise, characteristics hard, good starting, long life, etc.
3. This range hoods motorcan be designed and produced according to your requests.
We are professional motor manufacturer and earned much reputation in the treadmill motor field.
Our products range cover from ac induction, pmdc, a/dc universal, low voltage battery, gear reduced and customized motors.
Power input Rated voltage 3-phase AC220V/AC230V/AC380V/AC400V/AC415V/AC440V/AC460V/AC480V
1-phase
AC220V/AC230V
Rated input current See Section 2.3 in user manual
Frequency 50Hz/60Hz, acceptable fluctuation range ¡¨¤5%
Allowable range of voltage Continuous voltage fluctuation ¡¨¤10%, short fluctuation -15%~+10%, i.e. 323V~528V;
Voltage out-of-balance rate <3%, distortion rate as per the requirements of IEC61800-2
Power output Standard applicable motor (kW) See Section 2.3 in user manual
Rated current (A) See Section 2.3 in user manual
Output voltage (V) 3-phase: 0~ rated input voltage, Bias < ¡¨¤3%
Output frequency (Hz) 0.00~ 600.00Hz; unit: 0.01Hz
Overload capacity 150% - 1min; 180% - 10s; 200% - 0.5s once per 10 minutes
Operation characteristics Control mode V/f control
Sensor-less vector control without PG 1
Sensor-less vector control without PG 2
Range of speed regulation 1:100 ( V/f control, sensor-less vector control without PG 1)
1:200 (sensor-less vector control without PG 2)
Speed accuracy ¡¨¤0.5% (V/f control)
¡¨¤0.2% (sensor-less vector control without PG 1 & 2)
Speed fluctuation ¡¨¤0.3% (sensor-less vector control without PG 1 & 2)
Torque response < 10ms (sensor-less vector control without PG 1 & 2)
Starting torque 0.5Hz: 180% (V/f control, sensor-less vector control without PG 1)
0.25Hz: 180% (sensor-less vector control without PG 2)
Basic functions Start frequency 0.00~ 600.00Hz
Acceleration/deceleration time 0.00~60000s
Carrier frequency 0.7kHz~16kHz
Frequency command source Digital command + operating panel ¡Ä/¡Å
Digital command + terminal UP/DOWN
Communication
Analog command (AI1/AI2/EAI)
Terminal pulse command
Motor Started method Started from starting frequency
DC braking and then started
Speed search then started smoothly
Motor Stopped method Ramp to stop
Coast to stop
Ramp stop + DC brake
Basic functions Dynamic brake capacity Brake unit action voltage: 650V~750V; service time: 0.0~100.0s; brake unit for GK600-4T45G/55L or below could be internally mounted
DC brake capacity DC brake start frequency: 0.00~600.00Hz
DC brake current: 0.0~100.0%
DC brake time: 0.0~30.00s
Input terminals Six digital input terminals (can be extended to 7), one of which can be used for high-speed pulse input. Compatible with active open collectors NPN, PNP and dry contact input
Two analog input terminals, one of which is voltage/current programmable, and the other is voltage only (can be extended to 3; extension terminal is voltage/current programmable)
Output terminal One high-speed pulse output terminal, 0~50kHz square wave signal output; can output signals such as setting frequency and output frequency. etc
One digital output terminal
One relay output terminal (can be extended to 2)
One analog output terminal (can be extended to 2), voltage/current output optional; can output signals such as setting frequency and output frequency, etc
Characteristics Parameter copy, parameter backup, common DC bus, free switching between two motors¡¡¥ parameters, flexible function code displayed & hidden, various main & auxiliary command and switchover, speed searching, a variety of acceleration/deceleration curves optional, automatic correction of analog value, mechanical brake control, 16-step speed control programmable (2-step speed supports flexible frequency command), swing frequency control programmable, fixed-length control, counting function, three faults recorded, over excitation braking, over voltage stall prevention, under voltage stall prevention, restart upon power off, hopping frequency, frequency binding, free switching between four sections of acceleration/deceleration time, motor thermal protection, flexible fan control, process PID control, simple PLC, flexible multi-functional key setting, droop control, parameter identification, weak magnetic control, high-precision torque restraint, V/f separated control
Protection function Refer to Chapter VII - Fault Diagnosis and Abnormity Handling
Environment Place of operation Indoors, no direct sunlight, free from dust, corrosive gases, flammable gases, oil mist, water vapor, water drip or salt content etc.
Altitude 0~2000m
Derating is required where altitude is more than 1,000m; each increase of 100m in height corresponds to a decrease in rated output current by 1%
Ambient temperature -10¡ãC~50¡ãC
Humidity 5~95%, condensation not allowed
Vibration Less than 5.9m/s2 (0.6g)
Storage temperature -40¡ãC~+70¡ãC
Others
Efficiency Rated power
7.5kW and below: ¡Y93%
11~ 45kW: ¡Y 95% 55kW and higher: ¡Y98%
Installation mode Wall-mounted
Protection level IP20
Cooling mode Forced air cooling
Country of Origin: China (Mainland) Guangdong
Brand: GTAKE
Model: as type
Output power: other
0.4KW-800KW
Output type: Triple
Size: as model
Weight: as model
Input voltage :208V/220V/230V/380V/400V/415V/440V/460V/480V
Output: 0-rated input voltage
Type: AC/AC, or DC/AC inverters
Output frequency: 0.00-600.00Hz
Output current: as model
Input terminals: DI-7(HDI-1), AI-3 0~10V, or 0-20mA
Output terminals: DO-2(HDO-1), RO-2, AO-2
Certificate: CE, GOST
Applying motor: Asynchronous motor and synchronous motor
Cooling: Air cooling
IP grade: IP20
Input voltage: AC, or DC
Frequency command source:Keypad, terminals, communication
Communication: Modbus, Profibus-DP, CANopen, CAN
Control technique: V/f, SVC1, SVC2
1. 6m hose remove debris up to 25mm
2.Submerged depth:5m
3.Economical 120w motor
4.Safe in use and no harm to adult fish
Adjustable telescopic handle (1-2m)
Standard exported carton
3859 Electric Motors Suppliers
Short on time? Let Electric Motors sellers contact you.
