Find Verified Electric Motors Suppliers, Manufacturers and Wholesalers

High efficiency
Very low vibration and noise
High stability and reliability
Long service life

High efficiency
Very low vibration and noise
High stability and reliability
Long service life

High efficiency
Very low vibration and noise
High stability and reliability
Long service life

Step Angle: 1.8 degree
Model/ Motor Length/ Holding Torque Min. / Current/ Phase Resistance/ Phase Inductance/ Rotor Inertia/ Lead Wire/ Detent TorqueMax./ Motor Weight
34HS6540 65mm 240N.cm 4(A) 0.65(Ω) 3.3mH 0.8(g.cm²) 4 10(N.cm) 1.9 (kg)
34HS7060 70mm 340N.cm 6(A) 0.4 (Ω) 1.70mH 1.00(g.cm²) 4 12(N.cm) 2.1(kg)
34HS8060 80mm 450N.cm 6(A) 0.45(Ω) 3.0 mH 1.23(g.cm²) 4 15(N.cm) 2.3(kg)
34HS10060 100mm 728N.cm 6(A) 0.50(Ω) 4.8 mH 2.70(g.cm²) 4 20(N.cm) 3.3(kg)
34HS11860 118mm 870N.cm 6(A) 0.57(Ω) 5.5 mH 3.3(g.cm²) 4 30(N.cm) 3.7(kg)
34HS13060 130mm 1000N.cm 6(A) 0.6 (Ω) 5.8 mH 4.0(g.cm²) 4 35(N.cm) 4.0(kg)
34HS15060 150mm 1200N.cm 6(A) 0.7 (Ω) 6.8 mH 5.0(g.cm²) 4 45(N.cm) 5.5(kg)

Model Ac electric oscillating wall fan motor
Type Capacitor start asynchronous motor
Voltage AC 100V, 110V, 220 to 240V
Phase Single phase
Speed 1400 rpm
Life time Over 20,000 hours
Coil material Full copper or full aluminium
Housing material Iron or aluminium
Temperature rise Less tnan 70K
Insulation E
Out put power Customized
Certificates CCC, CE, ROHS
Noise Low noise
Stator size Regular size: 71*12mm, 71*20mm, 74*10mm, 74*16mm, 78*12mm, 78*16mm, 79*16mm
Other sizes could be customized
Capacity Standard 1.0 to 4.0 F, could be customized
Application Stan fan, desk fan, wall fan, box fan, tower fan, oscillating fan, air condition cooling fan

Heavy lift and high performance on agriculture drone, helps drone works more efficient and stable in precise agriculture.

1, Coreless DC brushless motor, high speed, high torque
2, in line with the EU environmental protection and energy saving requirements
3, robot design requirements, light weight, long life
4, effective motor efficiency up to 80-90%, better consistency, reliable performance, less failure, life expectancy up to 30,000 hours
5, the motor running at no-load and load more stable.

The planetary motor design displaces the load over multiple planetary gears allowing it to better handle heavier loads than other motor styles.
The planetary gears are synchronized allowing them to deliver consistent torque, providing a greater output capacity overall.
The design of planetary gears is very efficient at retaining lubricant allowing these small motors to operate at higher speeds.
For this reason, planetary gear motors perform best when high torque is needed.

high speed 2245 dc Servo motors Increased productivity due to reduced cleaning times Ideal for machines with an open design Quick and simple yet safe cleaning High operational safety Innovative motor design with superior efficiency Products for household appliances, power tools, massage, model...

Down-hole motor/mud motor is a positive-displacement motor(pdm), the high drilling fluid enters into the high fluid power converted into mechanical energy, and the rotor drives the principal shaft and bit rotating.

1.Material:Steel tube.
2.Standard:ASTM\DIN\BS\JIS\GB.
3.Surface finish:electrophoresis.
4.Weight: 0.5-5kg.

Fujian Fengli Machinery Technology Co., Ltd. is a professional casting, machining, complete sets of equipment manufacturing enterprises,in 2008 the company was recognized as the national high-tech enterprises, has won 23 national patents, is a pioneer in the field of science and technology innovation in China. The total area of comepnay is 105148 square meters, and divided into two areas (Fengli Longzhou Industrial Park, Fengli Yanshi Industrial Park).

Fengli foundry(founded in 1988) has Danish disa horizontal moulding line, resin sand production line and shot blasting machinee, annealing furnace, medium frequency furnace, spectrum analyzer, furnace rapid analyzer, carbon silicon instrument, universal testing machine, metallographic analysis, hardness tester and other types of production and processing and testing equipment, with annual production of various brands of gray cast iron, ductile iron, wear-resistant alloy steel, non-ferrous metal casting ability more than 10000 tons per year.

The company implements the modern enterprise management mode, with ERP system as the main body of the whole process of information management, and actively promote the standardization of management procedures, meticulous, systematic, full implementation of ISO9001 quality management system into performance management, lean production and other advanced management mode, and import ISO14001 environmental management system, the enterprise benefit and the pursuit of win-win the social benefits of the company. To get rid of the traditional concept of foundry offers only a blank, created to provide solutions, high-end castings, precision parts, customer service as the core of the new product concept, building high-grade and high-end market, enhance the value-added products.

The application of the company's products mainly include elevator, motor, gear box, auto parts, valves, light industrial machinery and other industries, and focus on casting and precision machining parts. We take "Philosophy leading, equipment leader, quality leader, service leader" as he core competitiveness of enterprises. The spirit of sincere and pragmatic, tireless dedication, teamwork and beyond the game work style.

4070 Planetary Gear motors

Electro motor power from 90 w to 180 w, single-phase, capacitor.
The power from 90 to 180 kw, operating voltage 220 v, motor connecting points (shaft outlet, shaft configuration, motor mounting holes) are determined individually with the customer. Also we can complete the engine with a thermal relay. The minimum . The minimum lot for delivery is from 100pcs up to 500pcs.

Type: Cold Stamping, Stator And Rotor
Mould: Multistep Progressive Dies
Surface Processing: Polishing
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm, 0.02mm
Customized: Customized
Material: Silicon Steel
Place Of Origin: China
Color: Silver
Certificate: ISO9001;2008
Brand: YuanzhongMachine
Capabilities: 16 To 300 Ton
Concentricity: Min 0.03
Range Of Application: Custom Stator Lamination

NAME: JUKI 2010 Y Axis Motor
MODEL: TS4515N2821E201
POWER: 950W

SUPPLY ALL JUKI MOTOR:
JUKI 2070/2080/1070/1080 / JX-100 / JX-300 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 2070/2080/1070/1080 / JX-100 / JX-300 T-axis motor HC-BP0136D-S1 SERVO MOTOR 10W 40044533
JUKI JX-100 JX-200 JX-300 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 3010/3020 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 3010/3020 T-axis motor HC-BP0136D-S1 SERVO MOTOR 10W 40044533
JUKI FX-1 / FX-1R Z-axis motor HC-BH0336L-S14 30W 40068457
JUKI FX-1 / FX-1R T-axis motor HC-BH0136L-S14 10W 40068459 40065066 L900E621000
JUKI FX-3 / FX-3RA Z-axis motor HC-BH0336LW4-S4 30W 40048065
JUKI FX-3 / FX-3RA T-axis motor HC-BP0136D-S1 10W 40044533

JUKI 750/760 ZT Axis Motor P50B03003PXS22 100V 30W E93077250A0 E93067250A0
JUKI 750/760 X Axis Motor TS4513N1820E200 200V 600W E9611721000
JUKI 750/760 Y Axis Motor TS4514N1827E200 200V 800W
JUKI 2050/2060 X Axis Motor TS4613N1020E200 600W
JUKI 2050/2060 Y Axis Motor TS4616N1020E200 1140W
JUKI 2050/2060 Z Axis Motor TS4633N2026E602 48V 40W 40003253
JUKI 2050/2060 T Axis Motor TS4631N2022E600 48V 13W 40003254
JUKI 2060 R Z Axis Motor TS4603N1320E601 48V 100W 40003255
JUKI 2060 R T Axis Motor TS4601N1620E600 30W 40003256
JUKI 2070/2080 X Axis Motor HF-KP73D-S1 750W 40050244
JUKI 2070/2080 Y Axis Motor HC-RP153D-S2 1500W 40053295
JUKI 2070/2080 Z Axis Motor HC-BH0336LW4-S1 30W 40044534
JUKI 2070/2080 T Axis Motor HC-BP0136D-S1 10W
JUKI FX-1/FX-1R Z Axis Motor HC-BH0336L-S14 30W
JUKI FX-1/FX-1R T Axis Motor HC-BH0136L-S14 10W
JUKI FX-1/FX-1R Y Axis Motor HC-MFS73(-S33) 750W
JUKI 2010 Z Axis Motor TS4633N2020E600 48V 30W
JUKI 2010 T Axis Motor TS4632N2020E600 48V 20W E9630729000
JUKI 2010 X Axis Motor TS4509N2821E200 400W
JUKI 2010 Y Axis Motor TS4515N2821E201 950W
JUKI 2020 R Z Axis Motor TS4501N1827E600 30W E9631729000
JUKI 2030 X Axis Motor TS4513N2821E200 600W
JUKI 2030 Y Axis Motor TS4516N2821E200 1140W
JUKI 730/740 Z Axis Motor L404-151EL8 24V 40W
JUKI 730/740 T Axis Motor L402-021EL0 24V 23W
JUKI 740 R Z Axis Motor L406-011EL8 24V 60W

NAME: JUKI 2030 X Axis Motor
MODEL: TS4513N2821E200
POWER: 600W


JUKI 2070/2080/1070/1080 / JX-100 / JX-300 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 2070/2080/1070/1080 / JX-100 / JX-300 T-axis motor HC-BP0136D-S1 SERVO MOTOR 10W 40044533
JUKI JX-100 JX-200 JX-300 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 3010/3020 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 3010/3020 T-axis motor HC-BP0136D-S1 SERVO MOTOR 10W 40044533
JUKI FX-1 / FX-1R Z-axis motor HC-BH0336L-S14 30W 40068457
JUKI FX-1 / FX-1R T-axis motor HC-BH0136L-S14 10W 40068459 40065066 L900E621000
JUKI FX-3 / FX-3RA Z-axis motor HC-BH0336LW4-S4 30W 40048065
JUKI FX-3 / FX-3RA T-axis motor HC-BP0136D-S1 10W 40044533

JUKI 750/760 ZT Axis Motor P50B03003PXS22 100V 30W E93077250A0 E93067250A0
JUKI 750/760 X Axis Motor TS4513N1820E200 200V 600W E9611721000
JUKI 750/760 Y Axis Motor TS4514N1827E200 200V 800W
JUKI 2050/2060 X Axis Motor TS4613N1020E200 600W
JUKI 2050/2060 Y Axis Motor TS4616N1020E200 1140W
JUKI 2050/2060 Z Axis Motor TS4633N2026E602 48V 40W 40003253
JUKI 2050/2060 T Axis Motor TS4631N2022E600 48V 13W 40003254
JUKI 2060 R Z Axis Motor TS4603N1320E601 48V 100W 40003255
JUKI 2060 R T Axis Motor TS4601N1620E600 30W 40003256
JUKI 2070/2080 X Axis Motor HF-KP73D-S1 750W 40050244
JUKI 2070/2080 Y Axis Motor HC-RP153D-S2 1500W 40053295
JUKI 2070/2080 Z Axis Motor HC-BH0336LW4-S1 30W 40044534
JUKI 2070/2080 T Axis Motor HC-BP0136D-S1 10W
JUKI FX-1/FX-1R Z Axis Motor HC-BH0336L-S14 30W
JUKI FX-1/FX-1R T Axis Motor HC-BH0136L-S14 10W
JUKI FX-1/FX-1R Y Axis Motor HC-MFS73(-S33) 750W
JUKI 2010 Z Axis Motor TS4633N2020E600 48V 30W
JUKI 2010 T Axis Motor TS4632N2020E600 48V 20W E9630729000
JUKI 2010 X Axis Motor TS4509N2821E200 400W
JUKI 2010 Y Axis Motor TS4515N2821E201 950W
JUKI 2020 R Z Axis Motor TS4501N1827E600 30W E9631729000
JUKI 2030 X Axis Motor TS4513N2821E200 600W
JUKI 2030 Y Axis Motor TS4516N2821E200 1140W
JUKI 730/740 Z Axis Motor L404-151EL8 24V 40W
JUKI 730/740 T Axis Motor L402-021EL0 24V 23W
JUKI 740 R Z Axis Motor L406-011EL8 24V 60W

NAME: JUKI 3010/3020 Z-axis motor
MODEL: HC-BH0336LW4-S1
POWER: 30W
P/L: 40044534


SUPPLY ALL JUKI MOUNTER MOTOR:
JUKI 2070/2080/1070/1080 / JX-100 / JX-300 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 2070/2080/1070/1080 / JX-100 / JX-300 T-axis motor HC-BP0136D-S1 SERVO MOTOR 10W 40044533
JUKI JX-100 JX-200 JX-300 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 3010/3020 Z-axis motor HC-BH0336LW4-S1 SERVO MOTOR 30W 40044534
JUKI 3010/3020 T-axis motor HC-BP0136D-S1 SERVO MOTOR 10W 40044533
JUKI FX-1 / FX-1R Z-axis motor HC-BH0336L-S14 30W 40068457
JUKI FX-1 / FX-1R T-axis motor HC-BH0136L-S14 10W 40068459 40065066 L900E621000
JUKI FX-3 / FX-3RA Z-axis motor HC-BH0336LW4-S4 30W 40048065
JUKI FX-3 / FX-3RA T-axis motor HC-BP0136D-S1 10W 40044533

JUKI 750/760 ZT Axis Motor P50B03003PXS22 100V 30W E93077250A0 E93067250A0
JUKI 750/760 X Axis Motor TS4513N1820E200 200V 600W E9611721000
JUKI 750/760 Y Axis Motor TS4514N1827E200 200V 800W
JUKI 2050/2060 X Axis Motor TS4613N1020E200 600W
JUKI 2050/2060 Y Axis Motor TS4616N1020E200 1140W
JUKI 2050/2060 Z Axis Motor TS4633N2026E602 48V 40W 40003253
JUKI 2050/2060 T Axis Motor TS4631N2022E600 48V 13W 40003254
JUKI 2060 R Z Axis Motor TS4603N1320E601 48V 100W 40003255
JUKI 2060 R T Axis Motor TS4601N1620E600 30W 40003256
JUKI 2070/2080 X Axis Motor HF-KP73D-S1 750W 40050244
JUKI 2070/2080 Y Axis Motor HC-RP153D-S2 1500W 40053295
JUKI 2070/2080 Z Axis Motor HC-BH0336LW4-S1 30W 40044534
JUKI 2070/2080 T Axis Motor HC-BP0136D-S1 10W
JUKI FX-1/FX-1R Z Axis Motor HC-BH0336L-S14 30W
JUKI FX-1/FX-1R T Axis Motor HC-BH0136L-S14 10W
JUKI FX-1/FX-1R Y Axis Motor HC-MFS73(-S33) 750W
JUKI 2010 Z Axis Motor TS4633N2020E600 48V 30W
JUKI 2010 T Axis Motor TS4632N2020E600 48V 20W E9630729000
JUKI 2010 X Axis Motor TS4509N2821E200 400W
JUKI 2010 Y Axis Motor TS4515N2821E201 950W
JUKI 2020 R Z Axis Motor TS4501N1827E600 30W E9631729000
JUKI 2030 X Axis Motor TS4513N2821E200 600W
JUKI 2030 Y Axis Motor TS4516N2821E200 1140W
JUKI 730/740 Z Axis Motor L404-151EL8 24V 40W
JUKI 730/740 T Axis Motor L402-021EL0 24V 23W
JUKI 740 R Z Axis Motor L406-011EL8 24V 60W

Power: 80W up to 30KW
Voltage:12-96V
DC, AC, PMAC

-The drive wheel is designed for internal use on battery-operated vehicles ( fork lift trucks, self â??propelled vehicles, AGVâ??S guided or guide wire)
-It can rotate 360 degrees, but generally are mounted mechanical stops or electromechanical switch to reduce the degrees of rotation.
-The drive gear is lubricated with grease, using grinded gear to minimize noise.
-Produced with low noise gear box, minimal envelope radius, and compact design
-The motor can be D.C. or A.C. On request we can supply shaft extension for encoder application and special plates
-All models can be supplied with turntable bearing
-Tire can be rubber, polyurethane, Vulkollan or non marking tire

Power: 100W up to 38KW
Voltage:12V-144V
Speed:1000-3500 rpm
DC, AC, PMAC
Working with planetary reducer, worm gear reducer, parallel shaft gear reducer etc.
DC brushed/brushless motor: 24V 48V(working with encoder, brakes and all kinds of reducer)

Power: 80W up to 30KW
Voltage:12-96V
DC, AC, PMAC

-The drive wheel is designed for internal use on battery-operated vehicles ( fork lift trucks, self â??propelled vehicles, AGVâ??S guided or guide wire)
-The drive gear is lubricated with grease, using grinded gear to minimize noise.
-Produced with low noise gear box, minimal envelope radius, and compact design
-The motor can be D.C. or A.C. On request we can supply shaft extension for encoder application and special plates