Rawsun ev motors are high efficiency designed for electric vehicles and electric boats as drive engines with output peak power 50 kw to 200 kw, peak torque 180 Nm to 2800 Nm. ****** Place of Origin:China Brand Name:Rawsuns Model Number:RSTM260-J Type:Synchronous Motor Frequency:200 Phase:Three-phase Certification:CE Protect Feature:IP67 AC Voltage:235VAC Efficiency:94.53% Winding Connection:Y Connection Battery Voltage (VDC):380 Rated Power (Kw):25 Peak Power (Kw):50 Rated Torque (N.m):80 Peak Torque (N.m):180 Rated Speed (rpm):3000 Peak Speed (rpm):6000 Rated Current (A):82 Peak Current (A):190
Place of Origin:China Brand Name:Rawsuns Model Number:RSTM424 Type:Synchronous Motor Frequency:200 Phase:Three-phase Certification:CE Protect Feature:IP67 AC Voltage:220VAC Efficiency:96.4% Winding Connection:Star Type Battery Voltage (VDC):380 Rated Power (Kw):70 Peak Power (Kw):120 Rated Torque (N.m):335 Peak Torque (N.m):600 Rated Speed (rpm):2000 Peak Speed (rpm):4500 Rated Current (A):210 Peak Current (A):370
Automotive motor assembly line, such as alternator assembly line, starter assembly line, wiper motor assembly line, steering gear motor assembly line, seat motor assembly line, fan motor assembly line, compressor motor assembly line and so on.
Rawsun motor controller is mainly used in the control of permanent magnet synchronous motor for new energy vehicles. The main technical characteristics are as follows: * Using 32-bit DSP as the main control chip. * Using automobile IGBT module, it has the characteristics of low temperature rise and low EMI. * Compact, robust and unique waterway design based on vehicle reliability. * Efficient energy recovery control. * With perfect protection of under-voltage, over-voltage, over-current, over-temperature, over-speed, etc. * Precise motor torque control, low speed anti-jitter processing. * Standing on the slope function, starting on the slope without hand brake can start smoothly, the distance of the car is less than 20 cm (Note: Selected for the use of motor controller). * Efficient Energy Recovery Control Strategy. * Intelligent Variable Carrier Control to Further Improve the Reliability of Controller at Low Speed. * Intelligent identification of motor parameters. * Support electronic throttle, fault display, gear control and other functions. * Support CAN2.0 communication protocol, data monitoring and parameter modification through CAN bus. ********* Place of Origin:China Brand Name:Rawsuns Model Number:RMC120 Rated Power:80KW Peak power:120KW Max output continuous current:200A Max output peak current:400A High volt input range:260-720 VDC Low volt input range:9-32 VDC Cooling type:Water cooled Peak efficiency:97% Weight:11.5Kg Dimension:380mm*280mm*98mm
Cloudray motor provides a range of 2-phase stepper motors and stepper motor driver with frame sizes from NEMA 17,NEMA 23,NEMA 24, NEMA 34. Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment. High Torque, High Precision and Long life is Cloudray's core advantages Stepper Motor characteristic: Low vibration,Low heating, No loss of step Fast Response,Better Acceleration Performance Higher Resolutionï¼?Avoidance of Resonance Regions Sturdy structure, extremely long life High quality materials including bearings and shaft made in Japan Short length and light weight allow them to be used in highly integrated systems ISO 9001, CE, RoHS international quality certification, reliable products.
25kg/cm Digital Servo with Red Coated Aluminum Case ItemNo.: DS3225MG Motor: iron core Gear: metal Weight: 64g Size: 40x20x40.5 mm Rotation scope: 180�°controlled Speed and Stall Torque 23Kg.cm/0.14sec/60�°@5.0V 25Kg.cm/0.13sec/60�°@6.0V 26Kg.cm/0.12sec/60�°@6.5V
Item No.: DS3115MG Motor: iron core Gear: metal Weight: 60g Size: 40x20x40.5 mm Rotation scope: 180�°controlled / 360�°continue for option Speed and Stall Torque 15Kg.cm/0.16sec/60�°@5.0V 17Kg.cm/0.14sec/60�°@6.8V
20kg/cm Digital Servo with Red Coated Aluminum Case Item No.: DS3120MG Motor: iron core Gear: metal Weight: 64g Size: 40x20x40.5 mmmm Rotation scope: 180�° or 270�° controlled / 360�° continue for option Speed and Stall Torque 15Kg.cm/0.16sec/60�°@5.0V 18Kg.cm/0.15sec/60�°@6.0V 21Kg.cm/0.14sec/60�°@6.5V
Rawsun motor controller is mainly used in the control of permanent magnet synchronous motor for new energy vehicles. The main technical characteristics are as follows: * Using 32-bit DSP as the main control chip. * Using automobile IGBT module, it has the characteristics of low temperature rise and low EMI. * Compact, robust and unique waterway design based on vehicle reliability. * Efficient energy recovery control. * With perfect protection of under-voltage, over-voltage, over-current, over-temperature, over-speed, etc. * Precise motor torque control, low speed anti-jitter processing. * Standing on the slope function, starting on the slope without hand brake can start smoothly, the distance of the car is less than 20 cm (Note: Selected for the use of motor controller). * Efficient Energy Recovery Control Strategy. * Intelligent Variable Carrier Control to Further Improve the Reliability of Controller at Low Speed. * Intelligent identification of motor parameters. * Support electronic throttle, fault display, gear control and other functions. * Support CAN2.0 communication protocol, data monitoring and parameter modification through CAN bus. ****** Place of Origin:China Brand Name:Rawsuns Model Number:RMC60 Rated Power:30KW Peak power (Kw):60KW Max output continuous current:160A Max output peak current:320A High volt input range:250-420 VDC Low volt input range:9-30 VDC Cooling type:Water cooled Peak efficiency:99% Weight:11.5Kg Dimension:380mm*280mm*98mm
Nema 17 stepper motor Peristaltic pump motor
Contol via foot pedal, bluetooth remote, or your smartphone Reinvented i-Pilot Link connects to your Humminbird sonar units Cable-driven, power-assisted steering cuts down fatigue Spot Lock GPS Anchoring System with Jog Feature Steering lock holds the motor's heading in any condition Digital maximizer extends battery life, keeping you on the water Bluetooth enabled
Deep Vibrator Motor 0.18kw To 2.2kw Single Phase And Three Phase 2pole, 4pole And 6pole
Deep Vibrator Motor 0.18kw To 2.2kw Single Phase And Three Phase 2pole, 4pole And 6pole
Deep Vibrator Motor 0.18kw To 2.2kw Single Phase And Three Phase 2pole, 4pole And 6pole
Dear gentlemen, we are China three Brothers Mechanical and Electrical Company, selling first-hand second-hand motors, we have YKK,YR,JS,JR,Y series motors, 220V to 10000V voltage, 50Hz motors
NEMA 34 CAN Closeloop 10N.m Integrated Stepper Motor Our drivers and controllers can be installed on the rear cover of NEMA17/NEMA23, It will simplify the design of integrated stepper motor. User can install the encoder to achieve open-loop control. The process of assembly is simple and flexible. It just require few connecting lines, and more space is saved. It is easy to distribute control and remote monitoring for users. As shown in the following figure, PMC006B4 controller is installed on the rear cover of NEMA17. The noise and vibration under low speed is slight. Stepper motor + PMC007C6SE driving controller + encoder Compact structure, saving complicated wiring, saving space High-precision, close-loop control with encoder Accurate positioning, recording step position, without losing step Easy to install, easy to distributed control, support a variety of control metho
Housing and casing for oil electric submersible pump ,motor ,protector and sepetator Application It uses coll rolling process and formed in one step,inner hole precision /-0.05mm, degree of finish Ra0.8~1.6, section wallthickness deviation 0.2mm, ovality within 0.05mm,straightness 0.2mm/m, The cold-rolled housing can be directly assembled and used without honing, which greatly saves the processing cost and improves the working efficiency. Characteristics Suitable for electric submersible motor ,pump ,protector and seperator with different geological conditions Types of ESP systems 375series,456series,562series,540series according to clients' drawing Material ASTM A335 T9/P9,45#steel,ASTM A335 P5,TP304,TP316,316L,L80 etc.according to clients' requirements Technical Performance Tensile strength>=560Mpa Yield strength>=525MPa Elongation>=10% Circular degree of inner hole
PMD006P3E is a kind of micro integrated stepper motor microstepping driver, which can be directly installed in the rear 42/57/86 etc series stepper motor, and which has the advantages of small size, strong driving force, and low heat and so on. PMD006P3E stepping motor driver can provide 0~6 continuous adjustable peak current, maximum 128 microstepping, free current which can be adjusted continuously.
Payment term : Western Union, Alipay, Paypal Delivery time:7-15 days MOQ : 1PC Shipping:Express Packing : Carton packing
Payment term : Western Union, Alipay, Paypal Delivery time:7-15 days MOQ : 1PC Shipping :Express Packing : Carton packing
