To adopte tri-phosphor glass tube with high light effciency of 60lm/w, a ra of 80-82 and long life time of 8, 000hrs No noise, no flicker, low harmonic, anti-interference, and eyes-care during working Saving 85% more energy than incandescent bulbs With pbt cap, the material of fire resistance Two color temperatures(2, 700k/6, 400k) for choice Lamps can work under -30íµtemperature Base: e26/e27/e40 Tube diameter: 14.5mm/17mm, 20pcs/ctn Operating voltage: 110v-130v/220v-240v/50-60hz
Simple direct replacement for ordinary light bulbsí¬suitable for any existing light bulb fitting Up to 80% energy savings with greater luminous efficacy than ordinary light bulbs 8, 000hrs of life time-6 times longer than ordinary light bulbs Wide color temperatures (2, 700k-6, 400k) for choice Ultra mini size fits most fixtures-table, recessed light, corridor light, wall sconce. Es (e27) = d:58.5mm l: 104mm
XP068A Table Lamp Size: diameter 30cm*40cm Shade materials: glass Body material: metal Socket: E27 Power: 1*60W
1: Integrated structure, easy for installation and maintenance 2: Aluminum die-casting housing with electro-static plastic spraying treatment. 3: Toughened glass cover and heatproof&waterproof silicone sealing gasket 4: High purity aluminum reflector , reasonable design for light distribution 5: Applicable places: stadium, workshop, station, warehouse , etc
1: Integrated structure, easy for installation and maintenance 2: Aluminum die-casting housing with electro-static plastic spraying treatment. 3: Toughened glass cover and heatproof&waterproof silicone sealing gasket 4: High purity aluminum reflector , reasonable design for light distribution 5: Applicable places: stadium, workshop, station, warehouse.
Energy saving lamp We supply a variety of energy saving lamps, our products conform to ce/ul certificate and life time more than 5000 hours. 100pcs/ctn, each packed in a color box.
1. Saving energy evidently, totally averagely saving power more than 70%. 2. Environment friendly(without lead, mercury, and other highly toxic pollutants; without interference on the power grid, bad glare-free, non-life habitat light pollution) 3. Unique structure of the new design.(scientific rectangular design equipped with light distribution)。 4. Intelligent control systems, precise current. Four-side adjustment of lighting angles( the farthest distance between the poles horizontally up to +é-ª 25 m, one-way up to 16m). 5. Long life span. 6.80v-264v input voltage, applied worldwide and keeping the same lux.
LED Streetlight Specification and strengths for us: 1. Energy saving, LSZM-LED lamps use HB high-power semiconductor light source with high efficiency, saving power more than 70% than conventional high-pressure sodium lamp, metal halide; 2. Environment friendly, LSZM-LED lamps dont have lead, mercury, and other highly toxic pollutants, pollution-free environment; to use environmentally friendly power supply design, power factor 0.98, harmonic_ 0.1, without interference on the power grid; bad glare-free, non-life Habitat Light pollution; 3.Unique structure of the new design. The invention of modular light source; scientific rectangular design equipped with light distribution; the world's first street lights precincts optical system; patents and waterproof light lens design integration; cooling system and street lights shell design, cooling system, high-purity polymer materials, A small thermal resistance, and continued to light up the whole lamp temperature less than 56 degrees Celsius; 4, intelligent control systems. Current precision to ensure the efficiency of the LED light source an average of 90Lm / W; wide input voltage used all over the globe, 85 ~ 264V high and low intelligent switching, the same illumination; soft-start design, to avoid direct current to the LED chip impact on the effective protection of the LED, To extend its life span; 6 hours after the lights, automatic power by half, saving energy again;
LED Streetlight Specification and strengths for us: 1. Energy saving, LSZM-LED lamps use HB high-power semiconductor light source with high efficiency, saving power more than 70% than conventional high-pressure sodium lamp, metal halide; 2. Environment friendly, LSZM-LED lamps don't have lead, mercury, and other highly toxic pollutants, pollution-free environment; to use environmentally friendly power supply design, power factor 0.98, harmonic í_ 0.1, without interference on the power grid; bad glare-free, non-life Habitat Light pollution; 3.Unique structure of the new design. The invention of modular light source; scientific rectangular design equipped with light distribution; the world's first street lights precincts optical system; patents and waterproof light lens design integration; cooling system and street lights shell design, cooling system, high-purity polymer materials, A small thermal resistance, and continued to light up the whole lamp temperature less than 56 degrees Celsius; 4, intelligent control systems. Current precision to ensure the efficiency of the LED light source an average of 90Lm / W; wide input voltage used all over the globe, 85 ~ 264V high and low intelligent switching, the same illumination; soft-start design, to avoid direct current to the LED chip impact on the effective protection of the LED, To extend its life span; 6 hours after the lights, automatic power by half, saving energy again; 5. four-way adjustment of lighting angles. For different types of road, the poles of different pitch, LSZM-LED lamps use four-way adjustment of the technical point of view (the world's original), a one-way road width of up to 16 meters, the farthest distance between the poles of up to 25 m.
Flood light 400W
Solar battery components: 1.5wp Light source: multi-color and super-illuminated LED Battery: 1600mAh Ni-MH, maintenance-free battery Controller: special controller for solar lamps Lighting time: 8-10 hours each night, 3-5 days on-end in cloudy or rainy weather Dimension and material: 500-600mm in height, cast aluminum, spraying-plastic
Solar panel: 100wp,monocrystalline silicon component Battery: 12V/120Ah, fully sealed and maintenance-free lead-acid battery Controller: 15A,special controller for solar lamps, protection against overcharge and over discharge, light control and time control Light source: 30W super-illuminated LED Illumination: 1500Lm Lamps post: 7m,steel, over striking and thickening, hot galvanization spraying-plastic Lighting time: fully charged lamps may work 6-10 hours a day (adjustable) and last 3-5 days on-end in cloudy or rainy weather Applicable temperature:-40íµ-50íµ
Operating Voltage:110-130V/60HZ,220-240V/50HZ Max Watt:175W Lamp:HPS 250-400W/E40 Material:Plastic(housing) Toughed Glass(Diffuser) Finishes:any RAL-color upon request IP Rating:IP 65
Technical parameters: Dimensions 304 264 68 (mm) Flame retardant abs material shell white shell White oval lamp flame-retardant casing material, transparent pc cover Mount installation The main electric power supply 220v 50hz The main electric power 1.8w Source type 2 6v 0.3a incandescent bulbs, 2 1.8w Standby power supply 6.0v, 1200mah Ni-Cd battery Emergency response time 90min Charging time 20h Conversion time 0.25s Non-continuous mode Ambient temperature -10 - 50 Relative humidity Rh 95%
1.9 Meter steel lighting pole 2.Round steel pole 3.Double Bracket 3.Steel pipe ª¦114.3 mm(4í¦) 4.2mm wall thickness 4.Steel pipe ª¦166.1 mm(6í¦) 4.2mm wall thickness 5.Door opening for electrical connection 6.Base plate 400X400X20mm thickness 7 Anchor bolt M24X700 mm long.
Structural Feature 1. Housing cast by 900T die-cast machine, featuring high strength, compact structure and smooth profile. 2. Reflector is made of high purity aluminum plate anodized, polished. 3. Highly-transparent toughened glass shade, 5mm thick, arc-shaped, heat resistant. 4. Spring cramp for operation. Integrated design enabling the installation of the electrical parts inside the lamp. 5. Rear pedestal designed for both horizontal and vertical installation to suit the need of various places. Technical Parameters 1. Protection rating: IP66 2. Housings anti-corrosion property: class II 3. Working environment: -35ípC~+45ípC 4. Lamp holder: E40 5. Electric shock-proof rating: class I 6. Power source: 220V - 240V/50HZ,60HZ 7. Lamp: 150W -400W high pressure sodium/metal halide bulb
Structural Feature 1. Housing cast by 1800T Buhler die-cast machine, featuring high strength, compact structure and smooth profile. 2. Reflector is made of high purity aluminum plate extension-formed. 3. Top-lift cover for easy repair and maintenance. 4. Internal bulb-replacement structure for excellent water-and dust-proof property. 5. Highly- transparent toughened glass shade. Technical Parameters 1. Protection rating: IP66 2. Housings anti-corrosion property: class II 3. Working environment: -35ípC~+45ípC 4. Lamp holder: E40 5. Electric shock-proof rating: class I 6. Power source: 220V - 240V/50HZ,60HZ 7. Lamp: 150W-400W high pressure sodium/metal halide bulb.
1.10 meter aluminum pole 2. Wall thickness: 5mm 3.Cast aluminum decorative base 4.Door opening for fuse box
Ac100-240v /32.5w /2700-8000k /80lm/w /ip65
Features: 1. Small and exquisie, no dark spot. Ideal lighting source for downlights and pendant lamps. 2. Soft beam. Flicker free. Eye-sight protection. 3. Adopted with high-quality tricolour tube 4. 10 times of life time than usual bulbs. 5.. 6 times of brightness and 80% energy saving than usual bulbs. 6. Application scope:suitable for downlights,table lamps,corridor lamps etc. 7. Best choice for the lighting of living-room,office,factory and shop etc 8.Service life up to 8000 hours . Export standard package . Mark according to client request . Colour box according to client. Request
