Product Characteristic Model: Model Y5-48 Boiler Centrifugal Induced Draft Fan Flow:2065-67803m3/min Shaft power:2.2-110KW Pressure:742-4483Pa Port Dia:355-1120A mm Rotating Speed:1000-3550r/min Product Introduction Model Y5-48 boiler centrifugal induced draft fan is designed for industrial boiler (1~20T/h) which burns all kinds of coal and is equipped with dust removal device.It is suitable for anywhere with appropriate intake condition and corresponding performance,but the maximum temperature should not exceed 250ºC. In front of induced draft fan,it must set a dust elimination device to reduce the dust content of the smoke gas into the fan.According to the general usage of power plant,the dust elimination efficiency is not less than 85%. In consideration of economy of the fan, triangle belt(C type)transmission is adopted,which can not only meet the requirement of the same tonnage boiler configuration of all kinds of dust remover with different rotating speed of one machine number, but also reduce the fan series and machine number.And It is convenient for user according to the actual situation, to choose different rotating speed to obtain the required and more ideal flow as well as pressure.
3. Product characteristics Model: 2.8,3.2,3.6,4,4.5,5,6,6.3,7,8,10,12.5,16,20,etc. Transmission way: 2.8~5(A type);6~12.5(C,D,E type);16~20(B type) Flow: 565-239654 m3/h Pressure: 166-3863 Pa Power: 0.55-220 KW Rotating speed: 250-2900 r/min 1. Product Introduction Model 4-72 centrifugal blower is applicable in ventilating and conveying air and other gases that non-flammable, non-explosive, non-volatile, harmless to the human body, non -corrosive to steel in general factory and large buildings indoor. B4-72 centrifugal blower can be used for pumping flammable and volatile gases.F4-72 model is mainly used for conveying corrosive gases.But there must be no any sticky substance in the gases that Model 4-72,B4-72,F4-72 centrifugal blower conveys, and the dust and hard particles contained no more than 150mg/m3. Gas temperature should not exceed 80ºC.
1.The Particulate matter and odor contained in the air are exhausted through negative pressure fan. 2. Quickly discharge indoor hot air to the outdoor to avoid the temperature rise in the workshop. 3. Used combination with other equipment, it can improve the environment in the wet and moldy warehouse, and has the effect of ventilation and dehumidification. 4. The air flow takes away the heat of the human body. The air flow accelerates the evaporation of the sweat and absorbs the heat of the human body, so that the body feels cool. 5. Combination with other cooling equipment, the temperature in the workshop can be controlled within 28 in the hot summer, keeping cool.
Size 120 x 120 x 38mm (4.71 x 4.71 x 1.50inch) Motor Shaded Pole Frame Aluminum Die-Cost Impeller PBT + 30% Fiber Glass. UL94V-0 Lead Wire 1007# 22AWG. UL/CSA Insulation Resistance Min 10 M 0hm at 500VDC Between Terminal and the Frame Dielectric Strength 1 min at 1,500VAC 50/60Hz Bearing Type B: 2 Ball Bearing. S: Sleeve Bearing Operating Temp Ball Bearing: Within -20 ~ 80°C Sleeve Bearing: Within -10 ~ 56°C Life Expectancy Ball Bearing: 50,000 hours at 60C Sleeve Bearing: 20,000 hours at 45°C Net Weight 520 grams
In order to meet the energy conservation,environmental protection and customers demand, now we recommend AirHorse brand oil-free double screw blowers,which is high efficiency,low speed,low noise,can help you save energy up to 60% and get purer air. 01: High Reliability, 24 hours running 02: Screw type reduces energy cost by an average of 30% 03: Permanent Magnet synchronous Frequency technology offers extra energy saving 04: PLC control, remote operation, Multi-machine control supplied
Product Code : SJ8038HA1/2 Price of product ( USD price or FOB price) : 5.9 Product Origin : China Key Specifications Or Special Features : SIZE 80×80×38 Frame Type Alumium painted with plastic UL94V-0 ImpellerThermoplastic UL94V-0 P.B.T. Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing / Sleeve bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Life Expectancy for Sleeve bearing30,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 / IP55 Minimum Order Size and Packgaing details : 40PCS,475*195*230,12.5KG
Product Code : SJ1225HA1/2 Price of product ( USD price or FOB price) : 5.9 Product Origin : China Key Specifications Or Special Features : SIZE 120×120×25 Frame Type Alumium painted with plastic UL94V-0 ImpellerThermoplastic UL94V-0 P.B.T. Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing / Sleeve bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Life Expectancy for Sleeve bearing30,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 / IP55 Minimum Order Size and Packgaing details : 60PCS,490*210*255,13.5KG
Product Code : SJ15050HA1/2 Price of product ( USD price or FOB price) : 11 Product Origin : China Key Specifications Or Special Features : SIZE 150×150×51 Frame Type Alumium painted with plastic UL94V-0 ImpellerThermoplastic UL94V-0 P.B.T. Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 / IP55 Minimum Order Size and Packgaing details : 24PCS,430*410*355,23KG
Product Code : SJ2509HA1/2 Price of product ( USD price or FOB price) : 42.66 Product Origin : China Key Specifications Or Special Features : SIZE ?254×89 Frame Type Alumium painted with plastic UL94V-0 ImpellerIron Blade Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 Minimum Order Size and Packgaing details : 10PCS,635*300*600,19KG
Product Code : SJ2208HA1/2 Price of product ( USD price or FOB price) : 36.8 Product Origin : China Key Specifications Or Special Features : SIZE 225×225×80 Frame Type Alumium painted with plastic UL94V-0 ImpellerIron Blade Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 Minimum Order Size and Packgaing details : 10PCS,635*300*600,22KG
Product Code : SJ2808HA1/2 Price of product ( USD price or FOB price) : 56 Product Origin : China Key Specifications Or Special Features : SIZE 280×280×80 Frame Type Alumium frame ImpellerIron Blade Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 Minimum Order Size and Packgaing details : 6PCS,660*340*430,14KG
Product Code : SW133HA1/2 Price of product ( USD price or FOB price) : 22 Product Origin : China Key Specifications Or Special Features : SIZE 133*93 Bearing Double ball bearing Voltage AC 110V, 220V Speed2700RPM Max. Airflow240CFM Noise Level58dB-A Minimum Order Size and Packgaing details : 12PCS,530*310*290,10.6KG
Product Code : SW175HA1/2 Price of product ( USD price or FOB price) : 36.8 Product Origin : China Key Specifications Or Special Features : SIZE 175*68.5 Bearing Double ball bearing Voltage AC 110V, 220V Speed2650RPM Max. Airflow490CFM Noise Level63dB-A Minimum Order Size and Packgaing details : 8PCS,490*440*230,11KG
Product Code : SJ8025HD1/2 Price of product ( USD price or FOB price) : 2.65 Product Origin : China Key Specifications Or Special Features : SIZE 80*80*25 Bearing Double ball bearing Voltage DC 12V, 24V Speed2800RPM Max. Airflow33CFM Noise Level33dB-A Minimum Order Size and Packgaing details : 200PCS,440*300*395 14.52KG
AC Axial Fan SIZE: 80x80x38 Frame Type: Alumium painted with plastic UL94V-0 Impeller: Thermoplastic UL94V-0 P.B.T. Insulation Resistance: Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing: Double ball bearing / Sleeve bearing Dielectric withstand: 1500 VAC for 1 second between terminal {wire} {+} and frame Voltage: AC 110V, 220V Life Expectancy: for Ball bearing 60,000 hours at 20 Life Expectancy: for Sleeve bearing30,000 hours at 20 Operating Temperature: -20 degrees ~ 85 degrees ordinary humidity Storage Temperature: -30 degrees ~ 140 degrees ordinary humidity Ingress of Protection: IP44 / IP55
AC Axial Fan SIZE: 120x120x38 Frame Type: Alumium painted with plastic UL94V-0 Impeller: Thermoplastic UL94V-0 P.B.T. Insulation Resistance: Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing: Double ball bearing / Sleeve bearing Dielectric withstand: 1500 VAC for 1 second between terminal {wire} {+} and frame Voltage: AC 110V, 220V Life Expectancy for Ball bearing: 60,000 hours at 20 degrees Life Expectancy for Sleeve bearing: 30,000 hours at 20 degrees Operating Temperature: -20 degrees ~85 degrees ordinary humidity Storage Temperature: -30 degrees ~140 degrees ordinary humidity Ingress of Protection: IP44 / IP55
AC Axial Fan SIZE: 92x92x25 Frame Type: Alumium painted with plastic UL94V-0 Impeller: Thermoplastic UL94V-0 P.B.T. Insulation Resistance: Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing: Double ball bearing / Sleeve bearing Dielectric withstand: 1500 VAC for 1 second between terminal {wire} {+} and frame Voltage: AC 110V, 220V Life Expectancy for Ball bearing: 60,000 hours at 20 degrees Life Expectancy for Sleeve bearing: 30,000 hours at 20 degrees Operating Temperature: -20 degrees ~85 degrees ordinary humidity Storage Temperature: -30 degrees ~140 degrees ordinary humidity Ingress of Protection: IP44 / IP55
Product Code : SJ9225HA1/2 Price of product ( USD price or FOB price) : 5.9 Product Origin : China Key Specifications Or Special Features : SIZE 92×92×25 Frame Type Alumium painted with plastic UL94V-0 ImpellerThermoplastic UL94V-0 P.B.T. Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing / Sleeve bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Life Expectancy for Sleeve bearing30,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 / IP55 Minimum Order Size and Packgaing details : 40PCS,475*195*230,12.5KG
Product Code : SJ1238HA1/2 Price of product ( USD price or FOB price) : 5.9 Product Origin : China Key Specifications Or Special Features : SIZE 120×120×38 Frame Type Alumium painted with plastic UL94V-0 ImpellerThermoplastic UL94V-0 P.B.T. Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing / Sleeve bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Life Expectancy for Sleeve bearing30,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 / IP55 Minimum Order Size and Packgaing details : 60PCS,585*308*300,20.8KG
Product Code : SJ1725HA1/2 Price of product ( USD price or FOB price) : 11 Product Origin : China Key Specifications Or Special Features : SIZE 172×150×51 Frame Type Alumium painted with plastic UL94V-0 ImpellerThermoplastic UL94V-0 P.B.T. Insulation Resistance Min. 100 Mohm at 500 VDC between terminal {wire} {+} and frame Bearing Double ball bearing Dielectric withstand1500 VAC for 1 second between terminal {wire} {+} and frame Voltage AC 110V, 220V Life Expectancy for Ball bearing 60,000 hours at 20 Operating Temperature: -2085 ordinary humidity Storage Temperature: -30140 ordinary humidity Ingress of Protection: IP44 / IP55 Minimum Order Size and Packgaing details :
