BLDC motor controller for blower 100W, energy efficiency, low noise with all-round protection as: Over-voltage, Over current, Limit current, phase loss, anti-reverse, anti-lock, etc. Performance data: Control way: Sin wave control, FOC Hall sensor: Senseless RPM: 0-5000 Speed control: RF/PWM/VSP/SPI Speed feedback: Yes Forward/Reverse function: Yes Can be with LED light: Yes Rated spec.: Input voltage: 220V/100V Power:80W Protection data: Current limit protection: 0.8A Over current protection:1.5A Phase loss: Yes Anti-reverse: Yes Anti-lock: Yes
Model No.:LLD-F32 Remote Control Without Remote Control Power Source Battery Material Plastic Installation Hung Neck Certification ROHS, CE Unit Weight 288g Colour White,Pink,Green Battery Capacity 2000mAh Wind Speed 3 Gears Trademark No Transport Package Carton Specification 570*60*45mm Origin SZ,China
Model No.:LLD-08 Remote Control:Without Remote Control Power Source:Battery Material:Plastic Installation:Table Certification:ROHS,CE,FCC Unit Weight:150g Colour:White,Pink,Green,Brown Battery Capacity:1200mAh Wind Speed:3 Gears Transport Package:Carton Specification:90*60*205mm Origin of place:SZ,China
STRONBULL 9-19 Industrial High pressure centrifugal blower 3 Phase carbon steel air exhausting fan PRODUCTS INFO: Type:STRONBULL Industrial High pressure centrifugal blower 9-19 Brand:STRONBULL Electric Current:AC Power:1.5-630kw Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:552-90100M3/h Air Pressure:2744 - 18336 Pa Speed:960r/min ,1450r/min,2960r/min Max Noise:
Our VERTICAL Laminar air flows are designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet Class 100 (Class conditions). The cabinets are fabricated out of thick board duly sun mica clad/ stainless steel/ Mild steel sheet. Interior surfaces are epoxy painted for its longer life. The worktable is made of stainless steel sheet and side panels are made out of thick transparent Plexiglas duly framed. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particulate Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all airborne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI marked motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lights fitted to the unit. Height of the working table provides comfortable "SIT DOWN" working position for the operator. Supplied complete with manometer, UV light fluorescent light.
- Mobile Dust Collection (Filtration) Fans - Radial Bladed Impeller From Sheet Metal - Electric Motor Of Form B5 Flange - Rigid Construction In Sheet Metal. - Mobile filtration system has radial bladed impeller with an open front. �°t has one top filter bag, one bottom collection bag. Mobile machine on four castors. - This system is suitable for suction of sawdust, granular materials, woodchips, metalchips, etc. Sucked saw dust collected in the filter bags and it will be removed manually.
- Casing (Box) Fans - Belt-Driven Nicotra Fan With Double-Inlet Backward Curved Bladed Impeller. - Body Construction From Aluminum Profiles With Plastic Corner Components. - Cabinet Surface Panels From Sandwich Wall. - On Demand, External Surface Coated With Electrostatic Painted Or Industrial Painted. - Hotels, restaurants, hospitals, cinemas, chemical, textil industries, printing works and all ventilation systems where noise level is important.
- Casing (Box) Fans - Belt-Driven Nicotra Fan With Double-Inlet Forward Curved (FC) Bladed Impeller. - Body Construction From Aluminum Profiles With Plastic Corner Components. - Cabinet Surface Panels From Sandwich Wall. - On Demand, External Surface Coated With Electrostatic Painted Or Industrial Painted. - Hotels, restaurants, hospitals, cinemas, chemical, textil industries, printing works and all ventilation systems where noise level is important.
- Vertical Type Radial Flow Roof Fans - Impeller With Backward-Curved Blades Made From Sheet Metal - Case Construction Helps To Vertical Air Flow. - Electric Motor With B5 Flanged - Hood For Protection Against To Atmospheric Agents. - Buildings where air changes are necessary to keep to room ventilated and suction of vitiated air, flue gases and vapour, department stores, swimming pools, kitchens, garages, farms, stables, domestic zones, foundries, workshops, chemical, mechanical and metallurgical industries where big air volumes must be sucked at low pressures.
- Radial Flow Roof Fans -Impeller With Backward-Curved Blades Made From Sheet Metal - Accident Protection Net Around Impeller - Electric Motor With B5 Flanged - Hood For Protection Against To Atmospheric Agents.
- Axial Flow Roof Fans - Directly Coupled Motor. - Impeller Is Manufactured From Polypropylene Blade. - Hub Is Made By Cast Aluminium. - Rigid Case With Sheet Metal. - Accident Prevention Net Suction Side Of Impeller - Hood For Protection Against To Atmospheric Agents.
- In-line Rectangular Duct Fans Have Advantageous With Compact Design and Easy Installation To Duct. - Directly Coupled External Rotor Motor. - Impeller and Casing Is Manufactured From Galvanised Steel. - High Efficient Backward Curved Centrifugal Impeller. - Possibility To Easily Maintanence and Cleaning To Impeller With The Help Of A Hinged Cover.
- Axial Flow Duct Type Tubular Fans - With Belt-Driven Motor. - Impeller Is Manufactured From Cast Aluminium Blade. - Hub Is Made By Cast Aluminium. - Duct Fan With Double Flanged Cylindrical Tube Case. - Rigid Construction In Sheet Metal.
- Axial Flow Duct Type Tubular Fans - With Belt-Driven Motor. - Propoller Is Manufactured From Galvanised Steel. - Duct Fan With Double Flanged Cylindrical Tube Case. - Rigid Construction In Sheet Metal.
- Axial Flow Duct Type Tubular Fans - Directly Coupled Motor. - Impeller Is Manufactured From Cast Aluminium Blade. - Hub Is Made By Cast Aluminium. - Duct Fan With Double Flanged Cylindrical Tube Case. - Rigid Construction In Sheet Metal. - Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.) - Smoke exhaust, suction of dusty and wet air in the foundries, cement factories, paper factories and joinery works, building ventilation and for heater and refrigerators.
- Axial Flow Duct Type Tubular Fans - Directly Coupled Motor. - Impeller Is Manufactured From Polypropylene Blade. - Hub Is Made By Cast Aluminium. - Duct Fan With Double Flanged Cylindrical Tube Case. - Rigid Construction In Sheet Metal. - Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)
- Axial Flow Duct Type Tubular Fans - Directly Coupled Motor. - Propoller Is Manufactured From Galvanised Steel. - Duct Fan With Double Flanged Cylindrical Tube Case. - Rigid Construction In Sheet Metal. - Air Flowrate : 3.000 - 67.500 m³/h (Min. - Max.)
- Axial Flow Wall/Window Type Fans - Square Framed Case Design. - Directly Coupled Motor. - Impeller Is Manufactured From Cast Aluminium Blade. - Hub Is Made By Cast Aluminium. - Rigid Construction In Sheet Metal. - Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)
- Axial Flow Wall/Window Type Fans - Square Framed Case Design. - Directly Coupled Motor. - Impeller Is Manufactured From Polypropylene Blade. - Hub Is Made By Cast Aluminium. - Rigid Construction In Sheet Metal. - Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)
- Axial Flow Wall/Window Type Fans - Square Framed Case Design. - Directly Coupled Motor. - Propoller Is Manufactured From Galvanised Steel. - Rigid Construction In Sheet Metal. - Air Flowrate : 3.000 - 67.500 m³/h (Min. - Max.)
