Find Verified Electric Fans Blowers Suppliers, Manufacturers and Wholesalers

WindMax Fans is new large HVLS energry-saving industrial fan based on PMSM (permanent magnet synchronous motor) principle developed by
WindMax. With 220N.m torque, the driving force is more stronger and the torque is more stable.86% motor efficiency,IE4 high efficiency.
The fan diameter from 2.5M to 7.3M,14850m�³/min air volume, free maintain for life, no need to change oil and seal.
20-years reliable life, WindMax Fans series solves the problem of ventilation and cooling in large spaces with better performance, lower energy consumption and longer life.

BLDC motor controller for blower 100W, energy efficiency, low noise with all-round protection as: Over-voltage, Over current, Limit current, phase loss, anti-reverse, anti-lock, etc.

Performance data:
Control way: Sin wave control, FOC
Hall sensor: Senseless
RPM: 0-5000
Speed control: RF/PWM/VSP/SPI
Speed feedback: Yes
Forward/Reverse function: Yes
Can be with LED light: Yes

Rated spec.:
Input voltage: 220V/100V
Power:80W

Protection data:
Current limit protection: 0.8A
Over current protection:1.5A
Phase loss: Yes
Anti-reverse: Yes
Anti-lock: Yes

Model No.:LLD-F32
Remote Control
Without Remote Control
Power Source
Battery
Material
Plastic
Installation
Hung Neck
Certification
ROHS, CE
Unit Weight
288g
Colour
White,Pink,Green
Battery Capacity
2000mAh
Wind Speed
3 Gears
Trademark
No
Transport Package
Carton
Specification
570*60*45mm
Origin
SZ,China

Model No.:LLD-08
Remote Control:Without Remote Control
Power Source:Battery
Material:Plastic
Installation:Table
Certification:ROHS,CE,FCC
Unit Weight:150g
Colour:White,Pink,Green,Brown
Battery Capacity:1200mAh
Wind Speed:3 Gears
Transport Package:Carton
Specification:90*60*205mm
Origin of place:SZ,China

STRONBULL 9-19 Industrial High pressure centrifugal blower 3 Phase carbon steel air exhausting fan

PRODUCTS INFO:
Type:STRONBULL Industrial High pressure centrifugal blower 9-19
Brand:STRONBULL
Electric Current:AC
Power:1.5-630kw
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:552-90100M3/h
Air Pressure:2744 - 18336 Pa
Speed:960r/min ,1450r/min,2960r/min
Max Noise:

Our VERTICAL Laminar air flows are designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet Class 100 (Class conditions). The cabinets are fabricated out of thick board duly sun mica clad/ stainless steel/ Mild steel sheet. Interior surfaces are epoxy painted for its longer life. The worktable is made of stainless steel sheet and side panels are made out of thick transparent Plexiglas duly framed. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particulate Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all airborne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI marked motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lights fitted to the unit. Height of the working table provides comfortable "SIT DOWN" working position for the operator. Supplied complete with manometer, UV light fluorescent light.

- Mobile Dust Collection (Filtration) Fans
- Radial Bladed Impeller From Sheet Metal
- Electric Motor Of Form B5 Flange
- Rigid Construction In Sheet Metal.
- Mobile filtration system has radial bladed impeller with an open front. �°t has one top filter bag, one bottom collection bag. Mobile machine on four castors.
- This system is suitable for suction of sawdust, granular materials, woodchips, metalchips, etc. Sucked saw dust collected in the filter bags and it will be removed manually.

- Casing (Box) Fans
- Belt-Driven Nicotra Fan With Double-Inlet Backward Curved Bladed Impeller.
- Body Construction From Aluminum Profiles With Plastic Corner Components.
- Cabinet Surface Panels From Sandwich Wall.
- On Demand, External Surface Coated With Electrostatic Painted Or Industrial Painted.
- Hotels, restaurants, hospitals, cinemas, chemical, textil industries, printing works and all ventilation systems where noise level is important.

- Casing (Box) Fans
- Belt-Driven Nicotra Fan With Double-Inlet Forward Curved (FC) Bladed Impeller.
- Body Construction From Aluminum Profiles With Plastic Corner Components.
- Cabinet Surface Panels From Sandwich Wall.
- On Demand, External Surface Coated With Electrostatic Painted Or Industrial Painted.
- Hotels, restaurants, hospitals, cinemas, chemical, textil industries, printing works and all ventilation systems where noise level is important.

- Vertical Type Radial Flow Roof Fans
- Impeller With Backward-Curved Blades Made From Sheet Metal
- Case Construction Helps To Vertical Air Flow.
- Electric Motor With B5 Flanged
- Hood For Protection Against To Atmospheric Agents.
- Buildings where air changes are necessary to keep to room ventilated and suction of vitiated air, flue gases and vapour, department stores, swimming pools, kitchens, garages, farms, stables, domestic zones, foundries, workshops, chemical, mechanical and metallurgical industries where big air volumes must be sucked at low pressures.

- Radial Flow Roof Fans
-Impeller With Backward-Curved Blades Made From Sheet Metal
- Accident Protection Net Around Impeller
- Electric Motor With B5 Flanged
- Hood For Protection Against To Atmospheric Agents.

- Axial Flow Roof Fans
- Directly Coupled Motor.
- Impeller Is Manufactured From Polypropylene Blade.
- Hub Is Made By Cast Aluminium.
- Rigid Case With Sheet Metal.
- Accident Prevention Net Suction Side Of Impeller
- Hood For Protection Against To Atmospheric Agents.

- In-line Rectangular Duct Fans Have Advantageous With Compact Design and Easy Installation To Duct.
- Directly Coupled External Rotor Motor.
- Impeller and Casing Is Manufactured From Galvanised Steel.
- High Efficient Backward Curved Centrifugal Impeller.
- Possibility To Easily Maintanence and Cleaning To Impeller With The Help Of A Hinged Cover.

- Axial Flow Duct Type Tubular Fans
- With Belt-Driven Motor.
- Impeller Is Manufactured From Cast Aluminium Blade.
- Hub Is Made By Cast Aluminium.
- Duct Fan With Double Flanged Cylindrical Tube Case.
- Rigid Construction In Sheet Metal.

- Axial Flow Duct Type Tubular Fans
- With Belt-Driven Motor.
- Propoller Is Manufactured From Galvanised Steel.
- Duct Fan With Double Flanged Cylindrical Tube Case.
- Rigid Construction In Sheet Metal.

- Axial Flow Duct Type Tubular Fans
- Directly Coupled Motor.
- Impeller Is Manufactured From Cast Aluminium Blade.
- Hub Is Made By Cast Aluminium.
- Duct Fan With Double Flanged Cylindrical Tube Case.
- Rigid Construction In Sheet Metal.
- Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)
- Smoke exhaust, suction of dusty and wet air in the foundries, cement factories, paper factories and joinery works, building ventilation and for heater and refrigerators.

- Axial Flow Duct Type Tubular Fans
- Directly Coupled Motor.
- Impeller Is Manufactured From Polypropylene Blade.
- Hub Is Made By Cast Aluminium.
- Duct Fan With Double Flanged Cylindrical Tube Case.
- Rigid Construction In Sheet Metal.
- Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)

- Axial Flow Duct Type Tubular Fans
- Directly Coupled Motor.
- Propoller Is Manufactured From Galvanised Steel.
- Duct Fan With Double Flanged Cylindrical Tube Case.
- Rigid Construction In Sheet Metal.
- Air Flowrate : 3.000 - 67.500 m³/h (Min. - Max.)

- Axial Flow Wall/Window Type Fans
- Square Framed Case Design.
- Directly Coupled Motor.
- Impeller Is Manufactured From Cast Aluminium Blade.
- Hub Is Made By Cast Aluminium.
- Rigid Construction In Sheet Metal.
- Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)

- Axial Flow Wall/Window Type Fans
- Square Framed Case Design.
- Directly Coupled Motor.
- Impeller Is Manufactured From Polypropylene Blade.
- Hub Is Made By Cast Aluminium.
- Rigid Construction In Sheet Metal.
- Air Flowrate : 3.150 - 96.500 m³/h (Min. - Max.)