Capacity:0.6-184m3/min
Pressure:9.8-98kpa
Motor:0.75-280kw
1.Payment terms: T/T(30% in advance and balance before delivery);L/C
2.Packing: Standard exporting wooden/iron box packing.
3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port)
4.Certificate: CE or any clients indicated.
The MTS series
Capacity:94-119m3/min
Pressure:19.6-98kpa
Motor:3-200kw
1.Payment terms: T/T(30% in advance and balance before delivery);L/C
2.Packing: Standard exporting wooden/iron box packing.
3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port)
4.Certificate: CE or any clients indicated.
The MTRF series
Capacity:71.6m3/min
Pressure :9.8-98kpa
Motor:30-355kw
1.Payment terms: T/T(30% in advance and balance before delivery);L/C
2.Packing: Standard exporting wooden/iron box packing.
3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port)
4.Certificate: CE or any clients indicated.
Specification of RSR Series Roots Blower
1.All models of RSR series
RSR-50 RSR-65 RSR-80 RSR-100 RSR-125 RSR-150C RSR-150A RSR-150 RSR-175A RSR-175 RSR-200H RSR-200 RSR-250D RSR-250 RSR-300 RSR-300C
2.Size of Discharge Bore
50(2â?³)ã?�65(2.5â?³)ã?�80(3.15â?³)ã?�100(4â?³)ã?�125(5â?³)ã?�150(6â?³)ã?�200(7.8â?³)ã?�250(9.85â?³)ã?�300(11.8â?³)
Or in customers indication range
3.Differential pressure scope
9.898kPa
4.Air capacity scope
0.6184m3/min
5.Power of the motor
0.75280kW
NECESSARY STANDARD ACCESSORIES
Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
3427 Electric Fans Blowers Suppliers
Short on time? Let Electric Fans Blowers sellers contact you.
Specification of MTS Series Roots Blower
1.All models of MTS series
MTS-11 MTS-12 MTS-21 MTS-22 MTS-23 MTS-31 MTS-32 MTS-33 MTS-41 MTS-42
2.Size of Discharge Bore
65(2.5â?³)ã?�80(3.15â?³)ã?�100(4â?³)ã?�150(6â?³)ã?�200(7.8â?³)ã?�250(9.85â?³)
Or in customers indication range
3.Differential pressure scope
19.698kPa
4.Air capacity scope
3.94119 m3/min
5.Power of the motor
3200kW
NECESSARY STANDARD ACCESSORIES
Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
Specification of MTS Series Roots Blower
1.All models of MTS series:MTS-11 MTS-12 MTS-21 MTS-22 MTS-23 MTS-31 MTS-32 MTS-33 MTS-41 MTS-42
2.Size of Discharge Bore:50-600 Or in customerâ??s indication range
3.Differential pressure scope:9.8â??196kPa
4.Air capacity scope:0.6â??1059 m3/min
5.Power of the motor:0.75â??750kW
NECESSARY STANDARD ACCESSORIES:Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
capacity:0.61-184m3/min
pressure:9.8-196kpa
motor power:0.75-750kw
usage:water treatment, power plant, cement plant, pneumatic, fish pond, aquaculture
Payment terms: T/T (30% in advance and 70%balance before delivery),L/C
Delivery time: common 20days after get the advance payment
Package: Standard exporting wooden box packing or in clients indications
Certificaton:CE
1.All models of RSR seriesï¼?RSR-50-300c
2.Size of Discharge Boreï¼?50-300Or in customerâ??s indication range
3.Differential pressure scope
9.8-98kPa
4.Air capacity scope
0.6-184m3/min
5.Power of the motor
0.75-280kW
NECESSARY STANDARD ACCESSORIES
Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
1.All models of RSR series
RSR-50-300c
2.Size of Discharge Bore50-300Or in customers
3.Differential pressure scope 9.8-98kPa
4.Air capacity scope 0.6-184m3/min
5.Power of the motor 0.75-280kW NECESSARY STANDARD ACCESSORIES Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
Low noise and Smart control by touching the body case.
Product Specifications:
Model: VH104
Product Description: Smart USB Fan "Yu" (low noise)
Size: Ø10 x 10 cm (Ø3.94 x 3.94in)
Electric power supply: DC5V(fixed)500mA or above (supplied from USB port)
Interface: USB 2.0/3.0
Weight: 290g (approximate)
Color: Black, White
Material: Metal Alloy, PP resin, PU Leather
Switch Position Levels: High, Low (2 Levels)
Air volume (m³/MIN): High 6.5, Low 5
Noise (db): High 34, Low 26
Length of USB cable: 1m/39.4in (approximate)
This looks like a normal Mini Fan that can cooling you down in the hot summer
But it has blue tooth function for you to connect with an APP which you can put any words you wanna say.
Power Source: Battery
Type: Air Cooling Fan
Installation: Table,pedestal,clip
Material: ABS
Certification: CE, RoHS, FCC
Power (W): 4
Voltage (V): 3.7
Brand Name: OEM
Model Number: F180
Place of Origin: China (Mainland)
Product name: Clip usb mini fan
Color: Blue Pink
Battery: 2200mA 18650 Lithium Battery
Input: DC 5V
Output: DC 5V-8V
Charge electricity: 1A
Using time: 3-10 hours
Size: 280*185*80mm
1m Wind distance: >6m/s
Packaging Details:1*Mini fan
2*2200mA battery
1*Charge cable
Delivery Detail:Shipped in 6 days after payment
Roots Blower For Sale
The Roots blower is a volumetric fan, with impeller end face and front and rear end covers of the fan. The principle is to use two blade shaped rotors to move relative in the cylinder to compress and transport gas in a rotary compressor. This type of blower has a simple structure and is easy to manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement conveying, and is more suitable for gas conveying and pressurization systems in low pressure situations. It can also be used as a Vacuum Pump, etc.
Type of Roots Blowers for Sale
Roots Vacuum Pump
Roots Vacuum pumps have been applied in petroleum, chemical, plastic, pesticide, turbine rotor dynamic balance, aerospace space simulation and other devices, so they should be vigorously promoted and applied in China. It is also widely used in industries such as petroleum, chemical, metallurgy, and textiles.
Rotary Air Blower
Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has large air volume, energy saving, and silent operation that other forms of fans cannot compare with.).
Smooth operation and convenient installation (for small models, as long as they are properly placed, the vibration is minimal and there is no need to install anti vibration devices, making installation convenient).
Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume changes very little with the pressure change).
Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation).
The material is excellent, the structure is clever, and the performance is stable (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, the performance is stable, and there are few long-term failures).
Simple maintenance, few faults, and long service life (low speed, low wear, and long service life).
A Roots Blower, also known as a positive displacement lobe blower, is a vital component in various industrial applications, including wastewater treatment, pneumatic conveying, and combustion air supply. Proper installation is crucial to ensure optimal performance, longevity, and safety. This comprehensive guide provides detailed instructions and best practices for installing A Roots Blower.
1. Pre-Installation Preparations
Technical Documentation and Planning
Review Documentation: Obtain and thoroughly review the manufacturer's installation manual, technical specifications, and dimensional drawings. Familiarize yourself with the installation requirements, procedures, and safety precautions.
Site Assessment: Evaluate the installation site to ensure it meets the environmental and spatial requirements specified by the manufacturer. Consider factors such as ambient temperature, ventilation, and accessibility for maintenance.
Foundation Preparation
Foundation Design: Construct a robust concrete foundation capable of supporting the blower's weight and minimizing vibrations. The foundation should be level, free from cracks, and elevated at least 30 cm above the surrounding ground to prevent flooding and facilitate maintenance.
Anchor Bolts: Install appropriately sized anchor bolts in the foundation to secure the blower and its driver (e.g., electric motor). Ensure the bolts are accurately positioned according to the blower's mounting dimensions.
2. Unpacking and Inspection
Shipment Inspection: Upon delivery, inspect the blower and associated components for any signs of damage incurred during transit. If damage is detected, file a claim with the carrier and notify the manufacturer immediately.
Component Verification: Cross-reference the received parts with the packing list to confirm that all components are present. If any items are missing, contact the manufacturer or supplier for replacements.
Cleaning: Remove any protective coverings and clean all parts to eliminate dust, debris, or corrosion inhibitors. Ensure that the blower's internal passages are free from foreign materials that could impede operation.
Roots blowers are used in numerous industries and industrial processes, including pneumatic conveying. Roots blowers play a vital role in many manufacturing and processing systems. Roots blowers are technically known as "positive displacement rotary blowers" and are commonly referred to as "blowers".
What does a Roots blower do?
Roots blowers are used to produce a constant airflow that is independent of the exhaust pressure conditions. The application of Roots blowers is limited to low and medium pressure and vacuum processes, and can be used to provide small to large airflow rates.
How does a Roots blower work?
Roots blowers consist of two identical and symmetrical rotors with two or three meshing blades in a sealed housing. The housing is valveless, and the air inlet and exhaust ports are usually located on opposite sides. The rotors rotate in opposite directions and are synchronized using a set of gears.
The air is displaced from the inlet to the outlet by the movement of the meshing blades on the counter-rotating rotors. The airflow rate produced by the displacement is mainly determined by the rotational speed of the rotors within the Roots blower. There is no change in the amount of air within the Roots blower, so no air compression occurs. Roots blowers are typically air-cooled, and some models do not require oil as a lubricant (oil-free).
Capacity 1.5m 3 / min
Watts Input (full Load) 350 Watts
No Load Speed 308 kmph
Approx Net Weight 4.6 kg.
High application in foundries
Al-die cast body
Insulation Double Insulated
Air Volume 3.8m3/min
Rated Voltage 235V AC
Watts Input (full Load) 600 W
No Load Speed 6000-16000 r.p.m.
Full Load Current 2.55A
Approx Net Weight 1.8 kg.
Dual function with blowing and suction applications
Powerful 600 W motor
Air flow of 3.8m3min for superior cleaning performance
Variable speed control with 6 step speed settings provides
Extra versatility in different applications
Ergonomic handle
Light Weight
MODEL RB500 PRO
High Power Blower
Insulation Double Insulated
Air Volume 3.8m3/min
Rated Voltage 235V AC
Watts Input (full Load) 600 Watts
No Load Speed 16000 r.p.m.
Full Load Current 2.55A
Approx Net Weight 1.6 kg.
Dual Function with blowing and suction applications
Powerful 600 W motor
Air Flow of 3.8m3/min for superior cleaning performance
Ergonomic handle
Light Weight
3427 Electric Fans Blowers Suppliers
Short on time? Let Electric Fans Blowers sellers contact you.
