SMB connector
Material Housing: LCP UL94V-0 Pin: Copper Alloy Latch: Stainless Electrical Voltage: AC 35V/PIN Current: 0.5A Contact Resistance: 50m ohms Max. Insulation Resistance: Initial 500M ohms Min. Final 100M ohms Min. Dielectric Withstanding Voltage: 0.5mA Max. Operation Temperature: -40 °C ~ +80 °C 1200PCS/BOX. SIZE: 48.8*38.6*29.2 (cm) GW:10KGS.
1.8V and 2.5V are available. Material Housing: LCP with 30% G.F. UL94V-0 Contact: Brass Latch: Stainless Finish Contact: Gold plated on contact and soldering end over 50u" Min. Nickel under-plating. Latch: 60~100u" Sn only (matte) plating over 50u" Min. Nickel under-plating. 1200PCS/box SIZE: 48.8*38.6*29.2 (cm) GW:10KGS.
impedance: 50 OHM Frequency: DC to 6GHz VSWR < or = 1.15. PE bag.
General Introduction • LEMO 19 pin medical electric cable connector • Specification (2B shell size) 1. Contact diameter: 0.7mm 2. Contact resistance: 7M 3. Working current: 4A 4. Enviromantal working temperature: -50~+125 degree 5. Insulation resistance: 5000 M 6. Mechanical endurance: at least 5000 times (connection and disconnection). • Application Communication, electronics and medical equipments. It is specially suited for electrical connectors in some instruments and equipments, which should be screened and be connected and separated frequently. Opp box, paper carton.
Specification 1. Insulation resistance M: 2000 M 2. Working temperature C: -40C~+85C 3. Mechanical endurance: at least 500 times 4. IP degree: IP68 5. Contact resistance: 2.0 M 6. Insulation resistance: 2000 M. Opp box, paper carton.
General Introduction • 6 pin self-latching terminal connector (lemo compatible) • Specification (1B shell size) 1. Contact resistance: 4MÙ 2. Working voltage: 830V/DC, 560V/AC • Features 1. They are multi-pith, small-sized, push-pull connection and screened electrical connector. 2. The screened electrical connector can be used safely and conveniently, and can connect and separate quickly. 3. The types of the metal electrical connector: solder and PCB.Socket assemble female. Plug assemble male. 4. According to the surroundings it is divided into general (B) and hermetic (K) type. • Application Communication, electronics and medical equipments. It is specially suited for electrical connectors in some instruments and equipments, which should be screened and be connected and separated frequently. Opp box, paper carton.
General Introduction • FGG 0B 6 pins metal push pull electric cable connector • LEMO compatible connector • Specification (0B shell size 6 pin connector) 1. Contact diameter: 0.5mm 2. Contact resistance: 4MÙ 3. Working current: 2.5A 4. Contact numbers: 6 pins Opp box, paper carton.
Specification: sheets and appearance drawing are available for requirement.
N series connector is a kind of threaded connection with low power. It widely applies to radio equipments and instruments for connecting RF coaxial cables. It can exchange with the international like product. Electrical characteristics: Characteristic impedance: 50+ Frequency range: 0-11ghz Contact resistance: Inner conductor: 1.0m+ Out conductor: 0.2 m+ Insulation resistance: 5000m+ Vswr: 1.30 Durability: 500 cycles. Material and finishing: Center contact: Pin- brass, gold or silver plated Jack- phosphor bronze or beryllium bronze, gold or silver plated Body and other metal parts: brass, nickel or ternary alloy plated Insulator: PTFE Gasket: silicone rubber. Standard export packing.
N series connector is a kind of threaded connection with low power. It widely applies to radio equipments and instruments for connecting RF coaxial cables. It can exchange with the international like product. Electrical characteristics: Characteristic impedance: 50++ Frequency range: 0-11ghz Contact resistance: Inner conductor: 1.0m++ Out conductor: 0.2 m++ Insulation resistance: +5000m++ Vswr: 1.30 Durability: 500 cycles Material and finishing: Center contact: Pin- brass, gold or silver plated Jack- phosphor bronze or beryllium bronze, gold or silver plated Body and other metal parts: brass, nickel or ternary alloy plated Insulator: PTFE Gasket: silicone rubber. Standard export packing.
Sma series RF coaxial connector has small volume, wide frequency band, excellent mechanical properties, high reliability and so on. It is one of the most popular used RF coaxial connectors. Electrical characteristics: Characteristic impedance: 50++ Frequency range: For flexible cable: 0-12.4ghz For semi-rigid or semi-flexible cable: 0-18ghz Contact resistance: Inner conductor: fn3.0m++ Out conductor: fn2.0 m++ Insulation resistance: f+5000m++. Vswr: For flexible cable: fn1.15+0.02f For semi-rigid or semi-flexible cable(straight): fn 1.10+0.01f Durability: 500 cycles Material and finishing: Center contact: Pin- phosphor bronze, gold plated Jack- beryllium bronze, gold plated Body and other metal parts: Brass, nickel or gold plated Insulator: PTFE Gasket: silicone rubber. Standard export packing.
Sma series RF coaxial connector has small volume, wide frequency band, excellent mechanical properties, high reliability and so on. It is one of the most popular used rf coaxial connectors. Electrical characteristics: Characteristic impedance: 50++ Frequency range: For flexible cable: 0-12.4ghz For semi-rigid or semi-flexible cable: 0-18ghz Contact resistance: Inner conductor: fn3.0m++ Out conductor: fn2.0 m++ Insulation resistance: f+5000m++ Vswr: For flexible cable: fn1.15+0.02f For semi-rigid or semi-flexible cable(straight): fn 1.10+0.01f Durability: 500 cycles Material and finishing: Center contact: Pin-------phosphor bronze, gold plated Jack------beryllium bronze, gold plated Body and other metal parts: Brass, nickel or gold plated Insulator: PTFE Gasket: silicone rubber. Standard export packing.
N series connector is a kind of threaded connection with low power. It widely applies to radio equipments and instruments for connecting RF coaxial cables. It can exchange with the international like product. Electrical characteristics: Characteristic impedance: 50+ Frequency range: 0-11ghz Contact resistance: Inner conductor: 1.0m+ Out conductor: 0.2 m+ Insulation resistance: 5000m+ Vswr: 1.30 Durability: 500 cycles Material and finishing: Center contact: Pin- brass, gold or silver plated Jack- phosphor bronze or beryllium bronze, gold or silver plated Body and other metal parts: brass, nickel or ternary alloy plated Insulator: PTFE Gasket: silicone rubber. Standard export packing.
Material: zinc-plated steel Protection rating: IP40 Working temperature: 0íµí½300íµ Compression strength(20mm): 2400N at 10%permanent deformation over 50mm length, pull off strength of conduit(20mm): 1500N Carton, wooden box
Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water 1 Has piercing structure, need not strip the connector over 2 Takes small installation space,easily installed 3 suitable for bridge,overhead line and underground 4 Can used in between below 50 degrees and 150 degrees Materials Body: Nylon 66 Teeth/blade : copper tinned Bolt: Hot dip galvanized Sheer head : Zinc alloy Parameters KTEP:main:16-95mm2/1.5-10mm2 Packing:300pcs/CTN
Anchoring bracket CA1500,CA2000,CA1000 Material:High strength aluminum ally by casting Product property:Anchoring ABC cables with neutral messenger on poles( wood, concrere ect.).excellent in industrial and saline environment.fixed by 2X (14mm or 16mm) Type :CA1500 Breaking load: 1500kg Type :CA2000 Breaking load:2000kg Type: CA1000 Breaking load: 1000kg
Model Gf-connector-1 Gf-connector-1 Body Brass Gold plated Inner conductor Beryllium or tin bronze Gold plated Resilient contact Beryllium-copper Gold plated Insulator Ptfe Crimp ferrule Copper alloy Nickel or gold plated O-ring sealing 6146 silicone rubber 100per/bag
We offer high quality connectors, the feature of the connectors are as follow: 1. Ceramic ferrule in PC,APC, UPC polishing 2. Easy assembly, meet Telcordia, ANSL, IEC, JIS standard 3. Low insertion loss and ultra low back reflection 4. Meet high precision requirement and has stable performance Application: 1.CATV system 2.Fiber optic telecommunication 3.Optical network equipment 4.High speed transmission system Technical Data Insertion loss:í_0.2dB Durability: 1000 cycles at 0.2dB Max Operating Temperature: -40~+85 Storage Temperature: -40~+85
SMA-905 connectors have a threaded coupling nut and feature a stainless steel or a high quality zirconia ferrule with ID sizes up to 1500 microns to accommodate a wide range of optical fibers. Applications 1.Medical / Surgical 2.Laser Systems 3.Spectrometers 4.Industrial & Military Features 1.Threaded nut connector 2.TIA / IEC compliant 3.Stainless Steel or Zirconia ferrule with custom ID sizes up to 1500um 4.Simple termination and assembly
