PCBA Test Probe Pogo Pin P166 Series Applied to ICT In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe P166 series here. Its diameter is 1.66 mm and the total length is 48.4 mm. Various tip styles, for example, B3, H, S, T, E, C, U, G, etc., are available for test probes. For details, please check below parameters. Technical Specifications Recommended Rated Stroke: 5 mm Spring Force: 500 gf (11 oz) Materials Contact Barrel: Brass, Nickel Plated Spring: Music Wire, Nickel Plated Plunger: Steel, Nickel Plated semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Spring Pin Battery Contact Probe BIP85 Series for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP85 series of battery contact probes. The outside diameter is usually 0.85 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms (Maximum) Full Stroke: 0.5/1.5 mm Rated Stroke: 0.34/1 mm Spring Force: 28/ 48 gf (1/ 1.78 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Gold Plated radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. UA C389 AE01, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. DSTD150A, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. 07DI92, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. DSTX170, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. AMC-DC, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. SC560, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. SC510, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. PM511V08, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. DSTD180, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. DSTC121, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. DSSB146, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK, WITH ONE YEAR WARRANTY, Item NO. DSDO115, Order(MOQ):, 1, Payment, T/T, Price Range, 1 - 5,Color, Depends on material, Lead Time IN STOCK
NEW AND ORIGIN ITEM IN STOCK WITH ONE YEAR WARRANTY Item NO.: DSAI146 Order(MOQ): 1 Payment: T/T Price Range: 1 - 5 Color: Depends on material Lead Time IN STOCK
Printed Circuit Board Assembly Test Probe Pogo Pin PQ75 Series Applied to ICT In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PQ75 series here. Its test center is 75 mil. The diameter is 1.02 mm and the total length is 33.02 mm. Various tip styles, for example, H, K, L, BK, etc., are available for test probes. There are three types of receptacles, namely CR, SC and WW, to fit each test probe. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.91 mm (75 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms Mounting Hole Size: Diameter 1.35 mm Full Stroke: 6.35 mm Rated Stroke: 4.3 mm Spring Force: 112/150/198 gf (4/5.5/7 oz) Materials Receptacle: Brass, Gold Plated Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Nickel Plated or Gold Plated Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Electronic Test Probe Pogo Pin PSICT39 Series for PCBA Inspection In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PSICT39 series here. The diameter is 0.61 mm and the total length is 19.5 mm. Various tip styles, for example, B, H, S, T, E, C, U, G, etc., are available for test probes. For details, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 70 milliohms Full Stroke: 4 mm Rated Stroke: 2.5 mm Spring Force: 70 gf (2.5 oz) at load 2.5 mm Materials Receptacle: Brass, Au on Ni Plated Contact Barrel: Phosphor Bronze, Ni Plated Spring: SWP-A/B, Au on Ni Plated Plunger: BeCu, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
In-circuit Test Probe Pogo Pin P078 Series for Printed Circuit Board Assembly In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe P078-BK-346 series here. The diameter is 0.78 mm and the total length is 34.6 mm. Various tip styles, for example, BK, H, S, T, E, C, U, G, etc., are available for test probes. For details, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 6.9 mm Rated Stroke: 4.6 mm Spring Force: 200 gf (7 oz) at load 4.6 mm Materials Contact Barrel: Phosphor Bronze, Ni Plated Spring: SWP-A/B, Au on Ni Plated Plunger: SK4, Au on Ni Plated Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
new and original package hot sell WITH ONE YEAR WARRANTY Item NO.: DSQC601 Order(MOQ): 1 Payment: T/T Color: Depends on material Lead Time IN STOCK
new and original package hot sell WITH ONE YEAR WARRANTY Item NO.: TP830 Order(MOQ): 1 Payment: T/T Color: Depends on material Lead Time IN STOCK
