Eltek Rectifier Flatpack S 48/1800 HE with CLEI
Eltek Rectifier Module Flatpack S 48/1000 HE with CLEI
Eltek Micropack 48V/250W Rectifier Micropack Wallbox Power Supply System 12V/480W, 24V/960W or 48V/1000W Compact wall-mounted power supply system PRODUCT DESCRIPTION The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution. The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module choice) 12V/120 480W / 10 40A 24V/240 960W / 10 40A 48V/250 1000W / 5.2 21A The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries (4x12V/7Ah, only with bulk DC output) . A simple removable front cover gives good access for installation and connections.
PRODUCT DESCRIPTION The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution. The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module choice) 12V/120 480W / 10 40A 24V/240 960W / 10 40A 48V/250 1000W / 5.2 21A The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries (4x12V/7Ah, only with bulk DC output) . A simple removable front cover gives good access for installation and connections.
Power Supply System 12V/480W, 24V/960W, or 48V/1000W Compact wall-mounted power supply system Eltek Micropack wallbox has been designed for industrial and telecom applications with power requirements in the range of 120- 1000W. With its compact design and simple installation and optional internal backup batteries make it a really â??microâ?? DC backup system.
Flatpack2 380V Rectifier Doc 241119.825.DS3 v4 Model Flatpack2 380/3000 HE (UI) Part number 241119.825 INPUT DATA Voltage (nominal) 176 - 277 VAC / 260 - 400 VDC1) Voltage (range) 85 - 305 VAC / 260 - 410 VDC1) Frequency 45 - 66 Hz / 15 - 18.5 Hz2) / DC1) Current (maximum) @ nominal input, full load 18.2 ARMS Power Factor > 0.99 at 50% load or more Protection Fuse in L & N Varistor Disconnect when VIN is out of range OUTPUT DATA Voltage (default) 381 VDC Voltage (adjustable range) 300 - 400 VDC # Pb cell supported 156 - 168 3) Power continuous (maximum) 3000 W Power @ 85 VAC / 85 VDC 1200 W Current continuous (maximum) 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC) Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load Static Voltage regulation (10 - 100% load) ±0.5% Dynamic Voltage regulation ±2.0% for 10-90% or 90-10% load variation, regulation time < 10 ms 5) Hold up time > 20 ms; output voltage > 300 VDC at 1500 W load Ripple < 1000 mVP-P , 30 MHz bandwidth Protection Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing diode, Fuse5), Short circuit proof, High temperature protection, Overload shutdown4) OTHER SPECIFICATIONS Efficiency @ 230 VAC / 380VDC input 96.2% / 96.6% Isolation 3.0 kVAC input to output, 1.5 kVAC input to earth, 1.5 kVDC output to earth, 3.0 kVAC CAN to primary, 3.0 kVAC CAN to secondary Alarms (Red LED) Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure Warnings (Yellow LED) Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of range, flashing at overvoltage Normal (Green LED) Input and output ok Acoustic noise, at nominal input and full load < 40dBA @Tambient< 25C / 40C MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) 2 291 210h (@ Tambient = 25 C) Operating temperature -40 to +75C (-40 to +167F), humidity 5 - 95% RH non-condensing Output power de-rates linear from 3000W @ 50C (122F) to 980W @ 7C(167F) Storage temperature -40 to +85C (-40 to +185F), humidity 0 - 99% RH non-condensing Dimensions[WxHxD] / Weight 109 x 41.5 x 327 mm (4.25 x 1.69 x 13) / < 1.95 kg (4.3 lbs) DESIGN STANDARDS Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013, UL 60950-1:2014, CSA C22.2 No. 60950-1-07 EMC EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 + A1:2010, IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013 Environment Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3) Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised 2011/65/EU (RoHS) & 2012/19/EU (WEEE)
PRTEM SMR3004D 48V 50A communication switching power supply module.
Pearl River Power CU0500BK
Pearl River Monitoring CU3000AK CU3000C-II
Control Unit CU3000
Prtem High Power Rectifier Module SMPS2000h (V2.3)
ZTE Power Wall-mounted Cabinet ZTE ZXDU68 S301
Zte Rectifer ZXD3000 V5.5
ZTE ZXD3000 V5.0 Rectifier Module Supply
New Product ZTE ZXD2400 V4.3 Power Supply Module ZTE 48V 50A Rectifier Module
Original ZTE ZXD2400 Rectifier Module V4.3 V4.2 Telecom Power Supply Unit
ZTE ZXD1500(V4.0) ZXDU58 Series Rectifier System ZTE Power Supply
ZTE Rectifier ZXD2400 V4.1
Original new ZTE ZXD2400(V4.0) Adjustable rectifier module
New Original Rectifier Module ZXD2400 V3.0
