Air duct heater is mainly used to heat up the air in the airduct, can be classified into three types by high temperature, medium temperature, low temperature.The common ground on the structure is adopting steel plate to support the heating tube, in the purpose of decrease the shake of the heating tube when the fan stops.Overtemperature controller is installed in the junction box.The low temperature type air duct heater can be directly installed on the airduct, due to the differences from the structure, the medium temperature type and high temperature type electric air heater has a 100mm thick thermal insulation material layer between the duct exine and the junction box clamp, not only to decrease the whole duct external heat dissipation, but also bring down the temperature in the junction box. Characteristics 1.Heating tube adopts outer coiled ripple-type ss belt, which enlarges the heat dissipation area, thus, it greatly improves the heat exchange efficiency. ¡¡¡¡2.Professional design, low wind resistance, uniform heating, no high temperature or low temperature blind angle. ¡¡¡¡3.Duplex protection, good safety performance.Temperature controller and fuse protector are installed, which can be used for controlling the heater operates normally under the condition of overtemperature and without wind, thus, to guarantee not a single miss in a ten thousand times. As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Type wbh-03003s wbh-03003d Capacity(t) 3 Standard lifting height(m) 3 Lifting speed(m) 2.2 2.4/0.8 Lifting motor power(kw) 1.5 1.8/0.6 Rotation speed(r/min) 1440 2890/980 Phases 3 Voltage(v) 200-440 Frequency(hz) 50 Operating motor power(kw) 0.75 Rotation speed(r/min) 1440 Operating speed(m/min) 11/21 Phases 3 Voltage(v) 200-440 Frequency(hz) 50 Chain turns 3 Chain specification ø7.1 Test load(t) 3.75 Weight(kg) 85 102 I-beam(mm) 100-178 Weight added with 1m higher(kg) 3.5. 68.5cm 44cm 63cm
Eaf is a heat charged material by means of an electric arc, its applications are very wide from production of ferro-alloys to other non-ferrous alloys, and production of phosphorus. Electric arc furnace range in size from a small units of approximately one capacity (used in for producing products) up to about 400 ton units used for secondary, and also used in research laboratories and dentistry, which have a few capacity, only a small dozen grams. Technical parameter: Model Rated capacity Max. Capacity Shell inner diameter Electrode diameter Transformer capacity TTMmMmKva Eaf-5t51032003004000. Keywords: furnace, induction furnace, arc furnace, eaf, smelting furnace, metallurgy machinery, industrial furnace, electrode arc furnace.
- The simplest Bidet - Cold & Hot Water - Wash - Bidet for Feminine with advanced hygiene management - Separated Two Nozzles - Water Temperature Control - Water Pressure Control - Nozzle Cleaning - Save the install cost by Easy way - No More Worry for Water leaking - No More Worry for cost for Electric Consumption - Back Flow Prevention Safety Device - Excellent Durability compare with Electronic Bidet - Product size : 466 * 505 * 130 mm - Carton size : 545 * 550 * 190 mm - Net Weight : 2.89 kg / Gross Weight : 4.16 kg/ea
Wall Mounted Electric fireplace front tempered glass. The glass is bending tempered. Thickness=5-8mm. Wooden box
Specifications: Motor: High efficiency brushless front wheel drive 36V/250W Batttery: 36V 10AH Lithium battery Charger: 110V-240V,50/60Hz, auto stop when charging finished Charging time: 4~6h Controller : Intelligent Display: LED Multi-function ( Power on/off, Shifft low/middle/high PAS, Optional PAS or TAG) Frame: AL-alloy 6061 Fork: Al-alloy Suspension Saddle: With suspension seat post Brake system: Front V brake, rear roller brake Derailleur: Rear internal 8 speed gear Tires: 28' 38C Working style: PAS, Twist and GO(TAG) Optional Max speed: 25km/h Continue range: 40km with PAS Loading capacity: 75KGS. Size: 1850, 600, 1200.
Technical Information: Processing with low carbon steel wire, through drawing and electric galvanizing ,Standard wire gauge from 8# to 16# Applications: Communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc. Material: super carbon steel Processing by drawing, hot-dip zinc-plating ,Standard wire gauge from 8# to 24# Thick zinc-coating layer Super in corrosion resistance Firm coating layer Custom size available ruction. See tables below for available sizes in detail: Wire gauge SWG(mm) BWG(mm) metric(mm) 8 4.06 4.19 4.00 9 3.66 3.76 - 10 3.25 3.40 3.50 11 2.95 3.05 3.00 12 2.64 2.77 2.80 13 2.34 2.41 2.50 14 2.03 2.11 - 15 1.83 1.83 1.80 16 1.63 1.65 1.65 17 1.42 1.47 1.40 18 1.22 1.25 1.20 19 1.02 1.07 1.00 20 0.91 0.89 0.90 21 0.81 0.813 0.80 22 0.71 0.711 0.70.
The CD1, MD1 electric wire rope hoist is one kind of small light crane equipment, mainly structures include speed reducer, travelling mechanism, coiling block, hook, coupling, Soft cable current introducer & limiter. It uses the taper rotor motor, which contains the driving force and braking force. The electric block has the features of compact, light, small-sized shape and smooth operation, it is the necessary crane machinery for the industrial & mining enterprise, storage, wharf and cargo lift producing occasion. It can be mounted on overhead I beam independently and also can be used with electric & manual single beam, double beam, and cantilever & gantry cranes together as a complete set.
Specification: Rated line pull 15000lbs ( 6804 kgs) Motor: Series wound 4.2 kw/ 5.5 hp(12v); 5.5 kw/ 7.5 hp(24v) Gear reduction radio 450 :1 Cable(Dia. * L) 7/16"*92'( 11mm*28m) Drum size(Dia.* L) 3.5"*8.8"( 89mm*222mm) Mounting bolt pattern 10"*4.5"(254mm*114.3mm) Overall dimensions(L*W*H) 23.07"*8.1"*9.57"(586mm*225mm*243mm) Weight 162.9lbs(73.88kgs).
Specification: Rated line pull 9500lbs ( 4309 kgs) Motor: Series wound 4.2 kw/ 5.5 hp(12v); 5.5 kw/ 7.5 hp(24v) Gear reduction radio 233 :1 (12V,24V) Cable(Dia. * L) 3/8"*85'( 9.2mm*26m) Drum size(Dia.* L) 2.48"*9"( 63mm*228mm) Mounting bolt pattern 10"*4.5"(254mm*114.3mm) Overall dimensions(L*W*H) 21.46"*6.30"*9.00"(545mm*160mm*220mm) Weight 68.3lbs(31kgs) Features: 1) Free spooling clutch 2) Automatic braking action 3) DC 12V or DC 24V power drive 4) Series wound motor 5) Full steel reducer gear 6) Adopt four plant gears in output stage of gear reducer very strong for heavy load 7) Remote control with control box and switch 8) Wireless remote control 9) SWR tensioner available Runva offroad winch Other products: electric winch, hydraulic winch, atv winch, 4wd winch, truck winch. Box.
Detailed product description M6-w stage electric chain hoist 1. Special in stage 2. Warrant one year, long life 3. The capacity from 0.5 to 2t Truck load: 500kg, 1000kg, 2000kg Improve speed: 4 m / min, 8 m / min, 16 m / min Lifting speed: 26 meters or 85 feet to a standard height, the concrete can be customized according to customer requirements, up to 40 meters or 131 feet Versatile: suitable for 230 volts to 460 volts 3-phase Light weight: tensile steel shell Use efficiency: lifting its unique five-hole wheel, so that the chain improve balance Reliability: hoist clutch with overload protection, overload protection in the event of the operator's safety and product from damage Safety: life maintenance, and provide parts and technical support. Wooden case.
Motor power: 500W Battery: 12Ah/12Vx3pcs Loading capacity:100kg Max speed: 25-30km/h G.W/N.W: 35/28KG Charging time: 4-6hours Braking system(F/R): disk Carton size: 1110x330x460mm Container load: 185pcs/20ft ,370pcs/40ft, 420pcs/40HQ. 1pcs in one carton.
Electric motor scrap Mix of scrap electric motors from scrap yard owner. Orders from 1 container to 20 containers per month. Ex-works = 900 USD / ton (EXW) Finland. 60 km from port of Helsinki (Finland).
External size: dia50x50mm Internal size: dia26x15mm Glazing color Material: China With adjustable adapter. 36pcs/carton, 1008pcs/pallet.
1. For application in removing all kind of orthopedic bandage High-speed saw blade vibration system Adopt import motor, powerful, quickly cutting and reliable. High efficiency and safety during operation 2. Characteristics of Electric Plaster Saw/Autopsy saw: It is the basic surgical equipment,which can effectively cut all kinds of bandages. 3. It uses high-speed saw blade vibration system.It will not scrach the skin for the blade rolls from left to right with the amplitude of 5.6 4. Technique feature & Parameter of Electric Plaster Saw/Autopsy saw: Frequency of swing:15000'/min,range of swing:6¡ã Power supply:AC 220V, 50Hz(or AC110V, 60Hz) Input power:125W. 5. Standard configuration of Electric Plaster Saw/Autopsy saw: One mainframe Three types saw blades One aluminium alloy box 6. G.Weight of electric plaster saw:1.14KGS Total G.Weight:2.54KGS Dimension:360*240*120mm Packaging: One set packed in the aluminum alloy box and then put in a carton Warranty:1 year parts and labor warranty Low noise total optimized mechanical structure and parts design. Alloy blade is suitable for long time use. The function of parenchyma protection is safe and reliable. Suit for cut macromolecule plastic material. Speed can be controlled, from the lowest 1 to the fast 6. One set packed in the aluminum alloy box and then put in a carton.
1, Stainless steel 2, Lithium ion battery. 1set/traveling bag.
5 year warranty for all frames. 1set/black traveling bag and 1 traveling bag/ctn.
JX-T01 Pedicab rickshaw Size: 3050*1100*1850mm 1. Wheelbase:2500mm 2. Net Weight: 144kg 3. Loading Weight: 380kg 4. Shell Material: Plastic 5. Max. Speed: 20km/h 6. Max. Climbing capacity: ¡Ü 20% 7. Number of Seat: 3 persons 8. Motor power: 500 w/ 48v 9. Full charging: 40km 10. Charging time: 8 hours. Sample packing: steel frame with wooden panel fcl: the fcl contianer will not be packed, directed load the container.
