Gboar RockShield is a noncombustible, waterproof, and mold resistant gypsum board wrapped by glass mat sheathing on the long edges, and front and back faces providing additional reinforcement and protection against weathering. Gboard�® Rockshield is used as a substrate to exterior cladding material such as marble, tiles, brick veneer, clapboard, wood shingles and more. It can withstand heavy wind, rain, and high temperatures. Advantages A gypsum board most suitable for outdoor applications Can withstand weather changes only if properly sheathed A thermally balanced with low water absorption Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM C518 ASTM C1178 Dimensions Width: 1200mm, 1220mm Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 9.5mm, 12.5mm, 15.9mm, 18mm
Gboar ContraSag RG is a lightweight and hard-edged plasterboard with enhanced sag resistant properties. It is mainly used for interior ceiling applications. The core of the board consists of a special combination of non-combustible gypsum, reinforced with ï¬?berglass and special additives. Gboard�® Gboard�® ContraSag is available in two different types: Regular and Moisture resistant. Gboard�® ContraSag RG has an ivory paper face and Gboard�® ContraSag MR has a green paper face. By using Gboard�® ContraSag, material costs are greatly reduced mainly because of the lower number of metal frames required for installation (for the same application area compared with regular types of gypsum boards). To achieve the same structural integrity as other gypsum board suspended ceiling systems, the required thickness of the metal frames is also reduced Advantages Gboard�® ContraSag RG is extremely lightweight, therefore it is exceptionnaly easy to handle when fixing it on suspended ceiling framing systems The large spacing between the furring channels results in using less metal frames leading to cost reduction Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width: 1200mm, 1220mm Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 12.5mm
Gboard�® ContraSag MR is a lightweight and hard-edged, moisture resistant plasterboard with enhanced sag resistant properties. It is mainly used for interior ceiling applications. The core of the board consists of a special combination of non-combustible gypsum, reinforced with fiberglass, silicon oil and special additives. The oil in the core acts as a water repellent rendering it more resistant to moisture. Gboard ContraSag MR has a green paper face. By using Gboard ContraSag MR, material costs are greatly reduced mainly because of the lower number of metal frames required for installation (for the same application area compared with regular types of gypsum boards). To achieve the same structural integrity as other gypsum board suspended ceiling systems, the required thickness of the metal frames is also reduced. Gboard ContraSag MR eliminates the cost of moisture resistance treatments. Advantages Gboard ContraSag MR is enhanced with special additives to repel moisture and resist sagging It is highly recommended in areas exposed to moisture The large spacing between the furring channels results in using less metal frames leading to cost reduction. Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint filling With Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width 1200 mm to 1220 mm Length 2000 mm, 2400 mm, 2440 mm 2500mm, 3000 mm Thickness: 12.5mm
Gboard Flexa is a flexible plasterboard designed to accommodate curved walls and ceilings. Using advanced technology and special additives Gboard Flexa is designed to have a wider bend radius and superior flexible properties. Gboar Flexa can be installed over a timber, metal profiles, and curved masonry walls. It is used to render aesthetically pleasing architectural effects for interior walls and ceilings. Advantages Ideal for interior rennovations Creates aesthetically appealing walls and ceilings with design flexibility. Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width 1200mm,1220mm Length 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 6.5mm
Gboard Core is manufactured with a thick type X fire-resistant gypsum core. It has enhanced moisture, mold, sound, and impact resistance properties and is used in shaft wall systems, and stairwells where high performance is required to provide enhanced safety for building occupants. Gboard Core system is based on a range of special metal profiles, mainly the Gframe CH-stud to guarantee high performance, stability, ease of installation, and maintenance. Advantages Ideal installation in elevators, stairs, and vertical shafts Edge Types Squared edge Standards ASTM C1396 ASTM C473 ASTM E84 ASTM E119 Dimensions Width: 600 mm, 610 mm Thickness: 25.0 mm Length: 3000 mm
Cboard RG is composed of Portland cement, high purity silica sand, reinforcing pulp recycled in our facilities and additives for water, and fire resistance properties. Cboard�® RG is a state-of-the-art asbestos free, highly durable and practical board used in many finishing applications; partition walls, dry linings, suspended ceilings, flooring, and external cladding. Cboard RG is impact resistant, durable and requires low maintenance. All materials are certified based on ASTM and EN standards and tested in approved laboratories. Advantages A solidly light regular fiber cement board ideal for indoor applications. Surface Finishing: Multiple finishing options Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint filling with Ccoat Multipurpose Joint Compound Edge Types: Squared edge Tapered Edge Standards: ASTM C1186 ASTM E84 ASTM C518 Dimensions: Width 1200mm 1220mm; Length 2400mm, 3000mm Thickness: 4.5mm, 6mm, 8mm, 9mm, 10mm, 12mm, 16mm, 18mm, 20mm
Egyptian Limestone with it's high brightness & high content of CaCO3 up to 99.3% , Whiteness 96.1% , sourced from the famous EL-Minia Mountains. Our customers are our friends.
LIMESTONE (calcium carbonate) is characterized by high purity (99.32% CaCO3) and high whiteness 96.1% We can supply LIMESTONE in Granules form 1-3.5 mm or according to the client requirements , these Feed grade packed in 50 kg pp Bags Our product is exported to many countries of the world such as Asia and Middle East.
LIMESTONE (calcium carbonate) is characterized by high purity (99.35% CaCO3) and high whiteness 96.1% We can supply LIMESTONE in lumps , as per the required size, and by any quantities, and packages the main use for this high whiteness Limestone is for PAINT INDUSTRY , Casts, Glass Manufactured, ......etc
LIMESTONE (calcium carbonate) is characterized by high purity (99.23% CaCO3) and high whiteness 96.1% We can supply LIMESTONE in powder form, as per the required micron size, from 45 micron up to 500 micron and by any quantities, packages and sizes
CEMI 42.5 N Portland cement is used for ordinary purposes, as it is suitable for all uses that do not require certain properties, such as those available in other types, and it can be used in ordinary and reinforced concrete that is not exposed to certain effects such as sulfate salts found in soil and water, and it is a well-known and famous product around the world. This product is mainly made from grinding clinker and gypsum in compliance with Egyptian standards ES 4756-1/2013 and European EN 197-1/2011. Properties Cement produced according to Egyptian specifications ES 4756/1-2013 and European specifications EN 197/1-2011. (Limits of Standard Specifications for Cement) Initial doubt time (minutes) 60 Volume stability (expansion) mm 10 2 day early pressure resistance (Mpa) 10 Standard pressure resistance 28 days (Mpa) 42.5
Egyptian marble is characterized by its tolerance to high temperatures and is not subject to scratching or damage, so it is suitable for kitchens, moreover, marble has a very great hardness and durability that makes it bear high pressure and different climatic conditions. Sand Tech is a certified supplier of Egyptian Marble & Granite.
Flint Egyptian Natural Pebbles PRODUCTION: The total production is 25000 - 30000 ton per year and our plan is to increase the production to be 40000 during 2023. â?¢ Our pebbles are used as a grinding ball into ball mills (ceramics industry) The high silica content ( 98.8%), and the hardness (7.5 on the Mos scale) as well as the rounding make our flint pebbles is an exceptional quality, with the local companies and the export territories. Size: 40 mm : 60 mm 60 mm : 80 mm 80 mm : 100 mm Chemical and Physical Analysis Si02 >= 99.31% Al203
Material: Stainless Steel Grade: 201 Length: 1500 or 1200 or 1000 mm Width: 500 mm Thickness: customize Number of Bowls: 1 Position: Centre Rear OR customize(right rear or left rear) color : silver Made in Egypt.
Rutile sand purity of 95% we can supply 200 tonnes/ month
Magnetite for producing Sponge iron cast iron
EMG offer for her customers the best egyptian limestone paving which you can'n find in anther companies,as in EMG we just care about you,as we want you always be happy and comfortable,in EMG you will feel safe becaues,as we offer the best stones
Wall cladding is when a material is used to cover the exterior wall. It is important in areas such as kitchens and bathrooms to use a method like this to prevent the walls against water, heat or gas vapors produced when cooking. Without wall cladding in these cases paint will usually peel from the walls and walls can become damaged. To prevent this from happening wall cladding is the best solution and it can also be an attractive feature in your home. Marble finishing as rock face, split face and others similar to this gives the wall a unique look, more appealing than a plain wall. Wall cladding also has many other decorative purposes.
CIDG which want you be comfortable all time,now it's offer just for you an amazing prices for marble and granite with a very high qality,In addition in CIDG you will love all our prodctes and you will be happy
Limestone is a sedimentary rock composed largely of the minerals calcite and aragonite, which are different crystal forms of calcium carbonate (CaCO3). we can reach up to 45 micron. Uses limestone: 1- Portland cement industry: about 76 % that mix with nonmetallic minerals which is chemically treated. 2- Anhydrous sod carbonates: which is important to glass industry, detergence industry, purification industry, by reaction of co2 produce from calcinations with sod chloride and ammonia. 3- Catalyst in iron kilns: that iron have silica and ammonia as impurities which removed by limestone, they found that 410 kg of limestone produce 1 ton of iron. 4- Rocky fiber: by melting limestone in kilns and pumping steam strongly, so fiber formed which use as thermal isolation. 5- Lime industry: limestone is fired to lose co2 with 44 % from its weight leaving cao, that happen at 1000 – 1100 degree, which use in glass, paper building industry. 6- Metal filler: easy to grind, low oil absorption, do not cause machine corrosion isolation of tank and roofs,, painting and ceramic industries. 7- Food industry: the pure one for birds, treatment for sugar. 8- Ornamental stone: and building. 9- paper: In alkaline papermaking, calcium carbonate is used as a paper filler and coating. Both uses require high brightness, high purity, small particle size, and lack of abrasion. 10- coating: used white pigment in paints because it is available at relatively low cost and has high brightness for TiO2 extension, high purity, low abrasivity, and resistance to weathering. 11- plastic and rubber industry: used filler in plastics due to its low cost, low abrasion, low oil absorption, low moisture, high brightness, and easy dispersion with conventional mixing equipment, In plastics they are used to improve mar and impact resistance, surface gloss, weatherability, shrin
