The threaded rods are steel rods designed to be in full tension state. They are mainly used in suspended ceiling applications. They connect suspended metal profiles (C-channel, furring channel) to the soffit ceiling by using the appropriate drop in Anchor. Advantages: Ceiling System
Gframe Nogging Track is manufactured to support the Gframe C-Stud and prevent its twisting. It is used in drywall partitioning and lining. Applications: Partition System Lining System Dimensions: 40 50 64 70 75 92 100 125 150
Gframe Perimeter L-angle is manufactured and roll formed in 3m strips with varying flange dimensions and gauges. Applications: Partition System Lining System Ceiling System Facade Dimensions: 25x25
Gframe Shadow Gap is a metal frame installed around the perimeter of the gypsum suspended ceiling or door frames, providing an architectural design effect. It provides a trimmed ceiling effect on the edges. Applications: Ceiling System Dimensions: 20x30x15x30 20x20x20x13 20x10x13x20
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The cross tees form the secondary frame of the system. Applications: Ceiling System Dimensions: 15 24
Gframe C-stud is manufactured and roll formed in 3m up to 8m strips with varying widths and gauges to support the structure. Applications: Partition System Lining System Faade Dimensions: 42 50 64 70 75 92 100 125 150
Gframe Curved Track is manufactured to support the Gframe C-Stud and it is used for curved drywall partitions. Applications: Partition System Lining System Ceiling System Dimensions: 50 64 75 92 150
Gframe Head Deflection Track is manufactured to support the Gframe Wall C-Stud from its top and prevent deflection. In addition, it provides enhanced sound insulation and fire performance. It is used in drywall and dry lining. Applications: Partition System Lining System Dimensions: 42 50 64 70 75 92 100 125 150
Gframe Fixing Channel is used as a horizontal member in drywall partitions, and it provides support for the Gframe wall C-Stud. It is used in partition walls and dry lining. Applications: Partition System Lining System Dimensions: 72 150
Gframe Flat Strip is supplied in rolls weighing around 100Kg. The length is cut according to design requirements. It used in partitions of heights above 3.5m. Applications: Partition System Lining System Specifications: Thickness Unit: mm Value: 0.55 / 0.6 / 0.7 / 0.8 / 0.9 / 1.00 / 1.2 / 1.5 Standards: ASTM C1396
Gframe furring channel is roll formed in 3m strips. Widths and gauges vary according to requirements. Applications: Partition System Lining System Ceiling System Facade System Dimensions: 69
Gframe J-Track is manufactured and roll formed in 3m up to 5m strips with varying widths and gauges to match the stud dimensions. Applications: Lining System Shaft Wall System Dimensions: 64 100 150
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The main tees form the primary frame known as the main beams. Applications: Ceiling System Dimensions: 15 24
Gframe Silent Stud is a vertical member of the partition system used to increase the acoustic performance. The unique design of the Silent Stud allows for higher and cost-effective sound insulation solutions. It is used in drywall partitioning. Applications: Partition system Lining System Dimensions: 92
Gframe Track is manufactured, and roll formed in 3 m up to 5 m strips with varying widths and gauges to match the appropriate studs. Applications: Partition System Lining System Faade Dimensions: 42 50 64 70 75 92 100 125 150
Gframe W-angle is manufactured and roll formed in 3 m strips and used in suspsended ceiling applications. Applications: Ceiling System Dimensions: 20x20 24x24
The furring channel joiner is used in ceiling application where connection between two consecutive furring channels is needed. This joiner is easy to install and does not require any special tool to be installed. Advantages: Ceiling System Lining System
Wafer head screws are self-drilling steel screws used for metal-to-metal fixation. They are used to fix the metal frames of the drywall systems. Advantages: Partition System Lining System Ceiling System
Self-drilling and anti-corrosion screws are used for drywall fastening. They are perfect for fixing plasterboards to light gauge steel framing greater than 0.7mm thick. The length of the screw used should allow for a nominal 10mm penetration into metal framing. Advantages: Partition System Lining System Ceiling System
Phosphate Self-Tapping and anti-corrosion screws are used for drywall fastening. They are used to fix plasterboards to light gauge steel framings of up to 0.7mm in thickness. The length of screw used should allow for a nominal 10mm penetration into metal framing. Advantages: Partition System Lining System Ceiling System
