Wafer head screws are self-drilling steel screws used for metal-to-metal fixation. They are used to fix the metal frames of the drywall systems.
Advantages:
Partition System
Lining System
Ceiling System
Wire connection clips are used in suspended ceiling systems to fasten the secondary furring channel to the main C- 38 channel. GaccessoriesTM wires are designed to have a thickness of 2 to 3mm and can bear up to 25 kg.
Advantages:
Ceiling System
Laminating screws are used to fasten multiple layers of gypsum board to metal profiles. They can be used in partitions, shaft walls, lining and suspended ceilings.
Advantages:
Partition System
Lining System
Ceiling System
The drop-in anchor is characterized by its ease of installation, anti-rust, and high pullout strength. It is used in suspended ceilings.
Advantages:
Ceiling System
The C-Clamp is used as a bracket to hold the C-38 channel in suspended ceiling applications. It is mainly used for moderate loads, attached to 6 - 8 mm threaded rods.
Advantages:
Ceiling System
457 Industrial Goods Supplies Suppliers
Short on time? Let Industrial Goods Supplies sellers contact you.
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads.
Advantages:
Partition System
Lining System
Ceiling System
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads.
Advantages:
Partition System
Lining System
Ceiling System
Anchor bolt is a heavy-duty anchor made of galvanized steel suitable for fixing hangers, brackets, channels, or other metal profiles to concrete walls. It is used for high heights and loads. Its characteristics include a torque-controlled expansion, a high load capacity in
solid material, and no harm coming from removing fixtures as they do not affect the anchor.
Advantages:
Partition System
Lining System
Ceiling System
Phosphate Self-Tapping and anti-corrosion screws are used for drywall fastening. They are used to fix plasterboards to light gauge steel framings of up to 0.7mm in thickness. The length of screw used should allow for a nominal 10mm penetration into metal framing.
Advantages:
Partition System
Lining System
Ceiling System
Self-drilling and anti-corrosion screws are used for drywall fastening. They are perfect for fixing plasterboards to light gauge steel framing greater than 0.7mm thick. The length of the screw used should allow for a nominal 10mm penetration into metal framing.
Advantages:
Partition System
Lining System
Ceiling System
we produce all kind of pp woven bags , we are manufactory from egypt with ISO CERTIFICATION , small bags 5kg up to 100 kg with bopp or without bopp , also we produce 4 loops big bags FIBC .
Silent Hangers are fixed by a threaded rod to hold the main channel in silent ceiling systems. They are used in cinema ceiling systems and have high performance in sound insulation.
Advantages:
Ceiling System
The plastic nail plug is used to fix the Gframe metal profile on floors, masonry, and soffits. It is used for nonstructural elements, easy to install, and economical.
Advantages:
Partition System
Lining System
Ceiling System
Gframe L-bracket is a simple rigid structure in the form of an L. It is used in dry lining and external cladding.
Advantages:
Lining System
Partition System
The furring channel joiner is used in ceiling application where connection between two consecutive furring channels is needed. This joiner is easy to install and does not require any special tool to be installed.
Advantages:
Ceiling System
Lining System
The perforated corner bead is used for exterior corner jointing. It allows the jointing compound to be fully settled on the jointing area; the compound goes through the bead and strongly fix the corner to the boards. It is used in dry lining and drywall partitioning to give a smooth and impact resistant finishing.
Advantages:
Partition System
Lining System
The control joint is a combination of two perforated beads that interlock with a PVC rubber joint. It may be used as a control joint in suspended ceilings, drywall, and lining based on project requirements. The control joint is designed to allow up to 4 mm movement in each direction.
Advantages:
Partition System
Lining System
Ceiling System
ES 11018-G is an LMA electrode dried to a very low moisture content and suitable for the welding of high-strength, low-alloyed steels, at room temperature or with moderate preheating.
Dimensions:
Width: 300*400 & 350*450 & 250*400 & 600*700 mm According to loads and customer needs.
Height: 8 - 200 mm
According to loads and customer needs.
Types:
- Type (C2): laminated bearing with elastomer comprising steel reinforcing plates in layers and with
smooth steel plates in top and bottom.
- Type (C4): laminated bearing with elastomer comprising steel reinforcing plates in layers and with
shaped steel plates in top and bottom.
- Type (B): laminated bearing fully covered with elastomer comprising steel reinforcing plates.
- Type (F): Plain Pad bearing, Block from Neoprene Rubber
Description:
Neoprene Bearing Rubber Pads provide a uniform transfer of load from beam to structure. They permit
rotation at the bearing point due to deflection or misalignment. They absorb vibration and prevent sound
transfer, while reducing the destructive action of vibration between movable and stationary members.
They also provide for movement caused by normal expansion and contraction.
Meets Standard Specifications for Highway Bridges, Fourteenth Edition 1989, Division II, Section 25-
Elastomeric Bearings, and EN13373-, and AASHTO Standard Specifications for Transportation Materials
and Methods of Sampling and Testing, Seventeenth Edition, M251.
Neoprene Bearing Pads are used extensively in bridge structures and prestressed and precast concrete
buildings. Also used in industrial machinery and heavy equipment applications
Zipped pockets both inside and outside, front pockets and inside collar with fleece lining, ribbed cuffs inside sleeves and endings
adjustable with velcro, elastic drawstring with cord stopper at bottom. Front closed with zipper and press buttons. At collar possible to attach separate hood 052066511.
Sizes XS- 6XL
70% polyester/30% cotton, 240 g/m2
ISO 20471 class 3 (left)
ISO 20471 class 2 (right)
For fabric: Oeko-Tex Standard 100
Side and back pockets, reach through opening in sides, one zip pocket at upper left side. Preshaped knees ans zip opening at sides. Braces with elastic at back, adjustable elastic inside back waist and front closed with zipper.
Sizes XS - 6XL
70% polyester/30% cotton, 240 g/m2
ISO 20471 class1
For fabric: Oeko-Tex Standard 100
Side and back pockets, chest pockets closed with zipper, reach through opening, inner pocket, rib cuffs inside sleeves, fleece inside collar, adjustable elastic in back waist, velcro strap at sleeve endings. Zippers insides at lower legs and snap buttons for detachable hood. Front closed with 2-way zipper and hidden press buttons. At collar possible to attach separate hood.
Sizes XS- 6XL
70% polyester/30% cotton, 240 g/m2
ISO 20471 class 3
For fabric: Oeko-Tex Standard 100
Chest, side - back and knee pockets. Reach through opening in both sides. Leg pocket on left side with mobile
pocket outside. Folding ruler pocket on right side. Front closed with spiral zipper.
Sizes XS - 6XL
85% polyester/15% cotton, 315 g/m2
65% polyester/35% cotton, 300 g/m2
ISO 20471 class 3
For fabric: Oeko-Tex Standard 100
Chest, side and knee pockets, back pocket, ruler pocket at right side and leg pocket on left side, adjustable waist, stand
up collar, front closed with hidden metal ring fasteners.
Sizes 38-72
65% FR cotton/34% polyester/1% negastat, 350 g/m2
EN ISO 11612: A1/A2, B1, C1, E2, F1
EN ISO 11611Class 1
EN 1149-5
IEC 61482-2 class 1
For fabric: Oeko-Tex Standard 100
* with HF-chip
Side and knee pockets, chest and back pocket, leg pocket at left side and ruler pocket at right side of leg.
Sizes 38-72
65% FR cotton/34% polyester/1% negastat, 350 g/m2
EN ISO 11612: A1/A2, B1, C1, E2, F1
EN ISO 11611Class 1
EN 1149-5
IEC 61482-2 class 1
For fabric: Oeko-Tex Standard 100
Side, back and knee pockets, leg pocket with mobile pocket and hammer loop at left side and ruler pocket right side. Chest pocket both inside and outside, reflective pipings at lower part of leg, zipper in fly.
Sizes 38-72
65% polyester/35% cotton, 300 g/m2
For fabric: Oeko-Tex Standard 100
Chest pockets with pen pockets and knife buttons, right pocket closed with flap, tool pockets at back, side and knee pockets,
leg pocket closed with flap at left side, mobile pocket, ruler pocket at right side, front closed with metal ring fasteners,
stretch fabric at back.
Sizes 38-72
65% polyester/35% cotton, 245 g/m2
For fabric:
Oeko-Tex Standard 100
Front and back pockets, reinforced knee pockets, leg pocket with mobile pocket at left side and a combined ruler
and tape measure* pocket at right side of leg. Chest pocket both in and outside. Legs are preshaped and hivis
yellow fabric* and reflective pipings for enhanced visibility.
Sizes 38 -72
65% polyester/35% cotton, 245 g/m2
* 65% polyester/35% cotton, 300 g/m2 and without tape measure pocket and hivis yellow fabric.
Front and back pockets, reinforced knee pockets, leg pocket with mobile pocket at left side and combined ruler and tape measure** pocket at right side of leg. Legs preshaped and hivis yellow fabric** and reflective pipings for enhenced visibility, normal waist closed with a plastic button and zipper.
Sizes 38 -72
65% polyester/35% cotton, 245 g/m2
** 65% polyester/35% cotton, 300 g/m2 and without tape measure pocket and hivis yellow fabric.
For fabric: Oeko-Tex Standard 100
* Ladies sizes 36-68
Side and back pockets, Napoleon chest pockets closed with zipper, pen holder at left sleeve, reinforced knee pockets, leg
pocket with mobile pocket at left side and combined ruler and tape measure pocket at right side of leg. Legs preshaped
and hivis yellow fabric and reflective pipings for enhenced visibility, stand up collar and front closed with zipper.
Sizes 38 - 72
65% polyester/35% cotton, 245 g/m2
For fabric: Oeko-Tex Standard 100
Gaccessories Perforated Shadow Line Stopping Angle corner bead is used for exterior corner jointing. It allows the jointing compound to be fully settled on the jointing area; the compound goes through the bead and strongly fixes the corners to the boards. It is used in suspended ceiling and false ceiling applications.
Advantages:
Ceiling System
* Helical wire diameter : 1.30mm - 1.50mm.
* Coils per m2 : 100-225 Units.
*Bonnell spring end ring : 62mm - 95mm.
*Bonnell spring wire diameter 1.80mm - 2.40mm.
*Bonnell spring turns : 4-7 turns.
*Bonnell spring height :70-210mm.
*Frame :round wire 4.5 - 5.00mm.
*Packing : press packed ( with frame, 15-25 unit per pallet pack )
or roll packed ( without frame, 5 - 15 unit per roll )
* Pocket spring diameter : 35mm - 70 mm.
* Pocket spring wire diameter : 1.20mm - 2.20mm.
* Coils per m2 : 200- 700 Unit ( according to customer request ).
* Pocket spring height : 50mm - 210mm.
* Top and bottom with / without Nonwoven.
* Packing : roll Packed ( 5-10 Units, Roll Pack ).
ESWECO is renowned for (Metal) cutting tools and is committed to providing the highest cutting performance and most productive cutting solutions in the market.
ESWECO has a powerful product range of abrasive cutting and grinding discs.
Bonded abrasives from ESWECO have been designed to make your work easier, quicker, and more efficient.
No matter whether you are looking for grinding and cutting discs, cup wheels, or grinding rings quality is always our priority.
Excellent cutting performance, low vibration while cutting, and minimum wear of the discs to secure a long product life and low-cost impact.
Our cutting and grinding discs follow the highest safety requirements in the market.
The range full fills in discs suitable for all steel materials and a wide variety of stone-based building materials.
They can be used to cut workpieces made of metal, stone, and stainless steel.
Side- and back pockets, shaped knees, zip opening at leg sides, elastic and adjustable waist with velcro, closed with jeans button and zipper.
Sizes XS - 6XL
70% polyester/30% cotton, 240 g/m2
ISO 20471 class 2 (left)
ISO 20471class 1(right)
For fabric: Oeko-Tex Standard 100
Stopping Bead is a squared corner metal frame that slides onto the board for a smooth finish in a suspended ceiling application. The finishing coats are applied up to the edge of the bead.
Advantages:
Ceiling System
It is used in packaging the products to keep them protected from the damage. Our product has high quality, as it is very elastic and transparent to facilitate the process of packaging the products and increase the protection. All sizes are available, with the ability to manufacture in customized sizes
457 Industrial Goods Supplies Suppliers
Short on time? Let Industrial Goods Supplies sellers contact you.
