Gboard Deciloc is a complete sound barrier. Due to its high density and high ber content, when installed in a partition system, ceiling or dry lining system, sound transmission from one area to another is practically eliminated. Gboard�® Deciloc STC rating is designed to reach a sound attenuation up to 75 dB within the system. Gboard Deciloc is used in loud spaces to eliminate sound transmission to neighboring areas. It can be installed around generators and technical rooms, office spaces, hospitals, meeting rooms, cinemas, theaters and large commercial areas where separation is needed. Advantages Noise reduction up to 75 Db Ideal to block sound inside of a space and eliminating its transmission to nearby rooms Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoatâ All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM C518 Dimensions Width: 1200mm, 1220mm Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm
Gboard Echo is a perforated gypsum board with a laminated acoustical eece to its back side. Its core is produced from non-combustible material and offers mechanical stability, which make the board suitable for screw-fastening to drywall framing. Gboard Echo provides excellent sound absorption for suspended ceiling applications or any other application that requires high NRC (Noise Reduction Coefficient) values. Advantages A lightweight accoustical fleece that absorbs sound laminated to its backside High NRC values: up to 0.8 Various perforation types suitable for all applications Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM E 84 ASTM C423 Dimensions Width: 1200mm, 1220mm Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm
Gboar RockShield is a noncombustible, waterproof, and mold resistant gypsum board wrapped by glass mat sheathing on the long edges, and front and back faces providing additional reinforcement and protection against weathering. Gboard�® Rockshield is used as a substrate to exterior cladding material such as marble, tiles, brick veneer, clapboard, wood shingles and more. It can withstand heavy wind, rain, and high temperatures. Advantages A gypsum board most suitable for outdoor applications Can withstand weather changes only if properly sheathed A thermally balanced with low water absorption Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM C518 ASTM C1178 Dimensions Width: 1200mm, 1220mm Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 9.5mm, 12.5mm, 15.9mm, 18mm
Gboar ContraSag RG is a lightweight and hard-edged plasterboard with enhanced sag resistant properties. It is mainly used for interior ceiling applications. The core of the board consists of a special combination of non-combustible gypsum, reinforced with ï¬?berglass and special additives. Gboard�® Gboard�® ContraSag is available in two different types: Regular and Moisture resistant. Gboard�® ContraSag RG has an ivory paper face and Gboard�® ContraSag MR has a green paper face. By using Gboard�® ContraSag, material costs are greatly reduced mainly because of the lower number of metal frames required for installation (for the same application area compared with regular types of gypsum boards). To achieve the same structural integrity as other gypsum board suspended ceiling systems, the required thickness of the metal frames is also reduced Advantages Gboard�® ContraSag RG is extremely lightweight, therefore it is exceptionnaly easy to handle when fixing it on suspended ceiling framing systems The large spacing between the furring channels results in using less metal frames leading to cost reduction Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width: 1200mm, 1220mm Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 12.5mm
Gboard�® ContraSag MR is a lightweight and hard-edged, moisture resistant plasterboard with enhanced sag resistant properties. It is mainly used for interior ceiling applications. The core of the board consists of a special combination of non-combustible gypsum, reinforced with fiberglass, silicon oil and special additives. The oil in the core acts as a water repellent rendering it more resistant to moisture. Gboard ContraSag MR has a green paper face. By using Gboard ContraSag MR, material costs are greatly reduced mainly because of the lower number of metal frames required for installation (for the same application area compared with regular types of gypsum boards). To achieve the same structural integrity as other gypsum board suspended ceiling systems, the required thickness of the metal frames is also reduced. Gboard ContraSag MR eliminates the cost of moisture resistance treatments. Advantages Gboard ContraSag MR is enhanced with special additives to repel moisture and resist sagging It is highly recommended in areas exposed to moisture The large spacing between the furring channels results in using less metal frames leading to cost reduction. Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint filling With Gcoat All Purpose Joint Compound Edge Types Squared edge Tapered Edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width 1200 mm to 1220 mm Length 2000 mm, 2400 mm, 2440 mm 2500mm, 3000 mm Thickness: 12.5mm
Gboard Flexa is a flexible plasterboard designed to accommodate curved walls and ceilings. Using advanced technology and special additives Gboard Flexa is designed to have a wider bend radius and superior flexible properties. Gboar Flexa can be installed over a timber, metal profiles, and curved masonry walls. It is used to render aesthetically pleasing architectural effects for interior walls and ceilings. Advantages Ideal for interior rennovations Creates aesthetically appealing walls and ceilings with design flexibility. Surface Finishing Multiple finishing options: Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint fillingWith Gcoat All Purpose Joint Compound Edge Types Squared edge Standards ASTM C1396 ASTM C473 ASTM E84 Dimensions Width 1200mm,1220mm Length 2000mm, 2400mm, 2440mm, 2500mm, 3000mm Thickness: 6.5mm
Gboard Core is manufactured with a thick type X fire-resistant gypsum core. It has enhanced moisture, mold, sound, and impact resistance properties and is used in shaft wall systems, and stairwells where high performance is required to provide enhanced safety for building occupants. Gboard Core system is based on a range of special metal profiles, mainly the Gframe CH-stud to guarantee high performance, stability, ease of installation, and maintenance. Advantages Ideal installation in elevators, stairs, and vertical shafts Edge Types Squared edge Standards ASTM C1396 ASTM C473 ASTM E84 ASTM E119 Dimensions Width: 600 mm, 610 mm Thickness: 25.0 mm Length: 3000 mm
Cboard RG is composed of Portland cement, high purity silica sand, reinforcing pulp recycled in our facilities and additives for water, and fire resistance properties. Cboard�® RG is a state-of-the-art asbestos free, highly durable and practical board used in many finishing applications; partition walls, dry linings, suspended ceilings, flooring, and external cladding. Cboard RG is impact resistant, durable and requires low maintenance. All materials are certified based on ASTM and EN standards and tested in approved laboratories. Advantages A solidly light regular fiber cement board ideal for indoor applications. Surface Finishing: Multiple finishing options Painted (Water or oil bas paint) Wallpaper, vinyl,wood Joint filling with Ccoat Multipurpose Joint Compound Edge Types: Squared edge Tapered Edge Standards: ASTM C1186 ASTM E84 ASTM C518 Dimensions: Width 1200mm 1220mm; Length 2400mm, 3000mm Thickness: 4.5mm, 6mm, 8mm, 9mm, 10mm, 12mm, 16mm, 18mm, 20mm
Gypsum powder, white cement, cornices, gypsum boards.Export, product sourcing, trading
Building materials, gypsum boards.
Gypsum Powder.
Fertilizer Grade Gypsum Powder.
Gypsum Powder.
Agriculture phospho gypsum.
Gypsum powder (P.O.P).
Construction materials such as gypsum.Export
Calcium carbonate, gypsum.
Gypsum Rock, Gypsum Powder, Kaolin.
Silica sand and raw gypsum.Transportation and shipping
Salt, cement, gypsum and single super phosphate.Export
