Applications: It can beused for EMI common mode filter of all kinds of power supply Features: High saturationmagnetic induction (1.25T), high permeability, high inductance (¡Ý 10 times of the amount of ferrite inductors), low loss, small size, light weight, strong anti-electromagnetic interference capability, excellent frequency characteristics , and high temperature stability. Performance: Iron Core Material 1K201 1K107 Saturation magnetic flux density (T) 0.6¡«0.8 1.25 Curie temperature (oC) >320 >570 Crystallization temperature (oC) >500 >500 Saturation magnetostriction coefficient ( 10-6) < 1 < 2 Residual magnetic flux density (T) 0.3¡«0.5 0.5¡«0.8 Initial permeability >80,000 >80,000 Maximum permeability >600,000 >600,000 Coercivity (A / m) < 2 < 2 Iron loss (20kHz, 0.5T), w / kg < 25 < 25 Iron Loss (100kHz, 0.2T), w / kg < 60 < 70 Iron loss rate of change (-50 ~ 130oC) 15 Wooden case+carton box.
Applications: It can be used for EMI common mode filter of all kinds of power supply Features: High saturation magnetic induction (1.25T), high permeability, high inductance ( 10 times of the amount of ferrite inductors), low loss, small size, light weight, strong anti-electromagnetic interference capability, excellent frequency characteristics , and high temperature stability Performance: Iron Core Material 1K201 1K107 Saturation magnetic flux density (T) 0.6&0.8 1.25 Curie temperature (oC) >320 >570 Crystallization temperature (oC) >500 >500 Saturation magnetostriction coefficient (¡Á 10-6) < 1 < 2 Residual magnetic flux density (T) 0.3,0.5 0.5,0.8 Initial permeability >80,000 >80,000 Maximum permeability >600,000 >600,000 Coercivity (A / m) < 2 < 2 Iron loss (20kHz, 0.5T), w / kg < 25 < 25 Iron Loss (100kHz, 0.2T), w / kg < 60 < 70 Iron loss rate of change (-50 ~ 130oC) 15 Applications: It can be used for output filter inductors, smoothing inductors, energy storage inductors of all kinds of power supplies and energy-saving lamp electronic ballasts, and the differential-mode inductance in the EMC filters.The open iron core has a good constant inductors properties and anti-DC bias capability. With low-loss, it can be used as inductor iron core of a variety of power supply. Features: The open iron core has a good constant inductors properties and anti-DC bias capability. With low-loss, it can be used as inductor iron core of a variety of power supply. Specification and Performance of the Iron Core: Specification of the Iron Core Effective permeability Transverse Magnetic Range (Oe) The rate of change (%) 12/20, 8 180 0¡«50 15 12/20, 10 180 0¡«50 15 16/26, 10 1000 0¡«10 20 300 0¡«30 15 180 0¡«50 15 20/32, 10 1000 0¡«10 20 300 0¡«30 15 180 0¡«50 15 20/30, 15 1000 0¡«10 20 300 0¡«30 15 180 0¡«50 15 32/50, 10 1000 0¡«10 20 300 0¡«30 15 180 0¡«50 15 32/50, 15 1000 0¡«10 20 300 0¡«30 15 180 0¡«50 15 Note: Iron cores of other specifications can be provided upon request of users. Wooden case+carton box.
JD168 series are low range differential pressure transducers and transmitters with NEMA4 (IP-65) rated aluminum. They are very rugged and very reliable, good for many industrial applications. The patented stainless steel sensor provides good corrosion resistance, excellent performance and long-term stability. Our unique production setup can also make special pressure range (e. G. -0.5WC to +3.5WC) to meet special applications. Features: Up to 15 PSI overpressure on all ranges Wrong-wiring full protection Pressure range as low as 10pa only Application: Power plant air flowmonitor and controw Clean room and fime hood control Duct static pressure control Draft control HVAC and VAV control Furnance air flow control. Shocking-proof package.
Operating Voltage V: 4 ~ 6 Rated Voltage V: 5 Rated Current mA: Max. 80 Coil DC Resistance : 40 ± 5 Sound output ( at 10 cm ) dBA: Min. 90 Rated Frequency Hz: 2700 Operating Temperature º C: -20 ~ +70 Storage Temperature º C: -30 ~ +85 Terminal : SMD Housing Material / Color: LCP / Black Weight g: 0.9.
Sound output (at 10 cm) dBA: Min. 70 (3Vp-p, 4000Hz, Square Wave) Max. Input Voltage Vp-p: 25 Max. Current Consumption mA: 1.0 Capacitance ( at 120 Hz ) pF: 14000 pF ± 30 % Operating Temperature º C: -20 ~ +80 Storage Temperature º C: -30 ~ +85 Terminal : SMD Housing Material / Color : LCP/Black Weight g: 1.
• Large current • Low resistance • Small profile • High frequency and low loss • Common mode filter • Suitable for excellent EMI suppressor • All trademarks shown here are for reference purposes only. They are the property of their respective owners and we are not authorized to sell items bearing such trademarks. Carton.
• Size: 6 x 8, 8 x 10 and 9 x 12cm • With shrink tube • Customized requirements are accepted. Carton.
We are the professional fish finder transducer manufacturer in China a)Cable:8-20m. b)Frequence:50KHz,200KHz,50/200KHz c)Power:300-1000w d)Material:Bronze e)Connector: Pin3-Pin10 f)Compatible:Furuno,Garmin,Raymarine,Navman,Hondex,Humminbird,Koden etc. 26*14*9cm.
MCC-w Miniature load cell uses the stainless steel structure , High precision ,Low contour ,sealed waterproofing ,stable performance; has strongly anti-torsion , anti-side ability, is suitable in electronic weighing apparatus and so on for automobile scale, track scale, platform scale, bunker scale, crane, and compression testing machine. Specification: Range 20,30,50,100,200 ,300,500,1000 kg Bridge voltage :10 V(DC) Output signal :1.5 mV/V Non-linearity :0.5 % F¡¤S Hysteresis :0.5 % F¡¤S Non-repeatability :0.5 % F¡¤S Temperature dirft :0.05 F¡¤S/¡æ Zero output :¡Ü2 % F¡¤S Operating temperature :-20~80. Standard export package.
Item Specifics: Model: PIM1030R12MZ L0(uH)/inductance at 0A,100KH):Typ.:0.12 DCR (mª+)at 25ípC:Typ.0.65/Max:0.75 Irated(Adc)/Heat RatingCurrent :Typ.:30 Isat(Adc)/Saturation Current:Typ.:75 Available L0(uH):From 0.12 to 10.00 Molded Power Inductor Operating temperature : -55íµ ~ +125íµ Ambient Temperature, Maximum : 85íµ Temperature Rise, Maximum: 40íµ Features Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant. Frequency range up to 5MHz. Lowest DCR/µH, in this package size Low buzz noise due to its gap-less structure RoHS compliant. Applications Notebook/Desktop/Server/Video Card applications. High current POL converters. Low profile, high current power supplies Battery powered devices. Ideal for power source circuits, DC-DC converter DC-AC inverters inductor application. Note: 1. L0 is inductance tested at 0 Adc. 2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current. 3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ. 4. Operating Temperature Range: - 55íµ to +125íµ 5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application. 6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.
Features: Laminated ceramic allows high SRF Closed magnetic circuits Monolithic structure suitable for flow and reflow soldering High resistance to heat and humidity Operating temperature range: -40 to 105ípC Applications: Wireless communication Mobile telephones Video cameras and portable VCRs
Ultrasonic Transducers Name Method Eg, UCE-6845D-20LA PZT8 UCE mean our company logol. 68 is stand for the dimetions of radiation head, 45 is stand for the dimetions of the piezoelectric ceramic,PZT8 is mean the material of piezoelectric ceramic,PZT8 is yellow ceramic,PZT4 is black. Ultrasonic Transducers is one of main products of at UCE ultrasonic,which used the piezoelectric effort to realize transduction between electric and sound energy,also named as BLT transducer,ultrasonic transducer normally used in ultrasonic cleaning industry,high power ultrasonic etc.
1).Analog generator 1. Assembled from the imported electronic component of excellent qualities. 2. The advanced and reliable circuit protection way greatly enhances the complete reliability. 3. With the figure showed, fm and frequency can be compensated automatically . 4. With frequency departure, two tables indicating working current and protection feature 5. Interface connector is collocated according to the request's requests. 6. Simple structure, easy maintenance, reasonable price and excellent quality. 2).Digital smart generator Digital smart ultrasonic power adopts new monolithic integrated circuits to control, measure, compare and implement the parameter. It's frequency self-tracking, power adjustment and impedance adjustment can be precontroled, thus to realize many functions, including automatic scanning, tracking, automatic fault detection and protection and convenient and reliable operation.
Main characteristics: High efficiency: with high mechanical quality, it can achieve high transfer efficiency between electrical energy and acoustic energy when working at the point of resonance frequency. Large amplitude: after optimal designed by computer, the speed of vibration becomes high and the amplitude of front plate becomes large. High power: under the action of the prestressed bolts , piezoelectric ceramic energy reaches to the utmost. Good heat-resistance : of small resonance impedance, little quantity of heat, can be used in a wide range of temperature with long life and high reliability.
The ultrasonic transducer is a part that can transform the electrical energy to the mechanical energy (ultrasonic). The most mature and reliable product now is piezoelectric transducer, which transform between electrical energy and the sound energy by the piezoelectric effect. It is composed of the central piezoelectricity ceramic component, metal cover board in front and back, the pre-stressed force screw rod, the electricity pole piece and the insulation tube. This kind of transducer (bolt fastening transducer), shapes in sandwich, can generate the stable ultrasonic wave while the load changed. It is the most essential and the main method to obtain the power ultrasonic generator. According to the different designation, it can be divided into columnar type (the diameter of the metal cover board in front and back are the same), upside-down the trumpet (front cover board diameter to minish gradually through the arc), the columnar type steel with post operculum, and the columnar type with nodal point and so on. Standard
Ip/ep converter Ip/ep transducer Electropneumatic transducer Input electrical current:4-20ma, 0-10v Output pressure:20-100kpa Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal. Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h). Features: Flow rate: 7.6m3/h when supply pressure is 175kpa 20.0m3/h when supply pressure is 700kpa Min/max. Supply pressure: Minimum-3psig(21kpa) above maximum output Maximum-100psig(700kpa) Sensitivity:
Electropneumatic transducer Input electrical current:4-20ma, 0-10v Output pressure:20-100kpa Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal. Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h). Features: Flow rate: 7.6m3/h when supply pressure is 175kpa 20.0m3/h when supply pressure is 700kpa Min/max. Supply pressure: Minimum-3psig(21kpa) above maximum output Maximum-100psig(700kpa) Sensitivity:
Ll1608-fsl3n9s Toko make Pack:2k/reel Datecode:09+rohs L/t:1-7days Weight:0.2kg Reel package
Features: 1. Pressure ranges: 0~10, ..., 0~3000 bar 2. Output signals: 4~20 ma, 0~5 v or 0~10 v 3. High precision: up to 0.05%fso (applicable for range >16barg) 4. Temperature coefficients of zero & span: 0.005%fso 5. Flush membrane available for pressure range > 16 barg 6. Integrated design for 100% pressure seal, no o-ring built in its body 7. Materials: 304 ss (housing); 17-4ph (wetted parts) Oem inner box and carton
Descriptions and gauge configurations Based on piezoresistive effect, bcm semiconductor strain gauges are made from p-type doped silicon wafer, and manufactured in two types: bar-type and backing-type. When gauges are made in the bar-type, they are naked gauges (sn-series), while made in the backing-type, the gauges are backed with phenolic-resin (sb-series). The semiconductor gauges are manufactured of three different dimensions ("1", "2" and "3") and the gauge leads can be finished in different lead-configuration. Illustrated on the top, are some sb-series backed-gauges of type 2 lead-configuration. Oem inner box and carton
