1.The brief introductions of SJD-2B collapsible electric water well drilling rig The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on. 2.The specifications of SJD-2B collapsible electric water well drilling rig ·Punching range: 60-250mm; ·Drill pipe diameter: 1.2 inch; ·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters. ·Voltage: 220V ·Rotary motor: 4000W; ·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W; ·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible). ·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.The brief introductions of gasoline engine water well drilling rig ·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance. ·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced. ·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors. ·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well. 2 .The features of the gasoline engine water well drilling rig The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on. The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg. Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.The applications of FY260 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling, ·drilling with large diameter ·deep drilling footage ·fast, flexible and efficient. 2.The specifications of FY260 crawler pneumatic water well drilling rig Model FY260 Gross weight t 6.2 External dimension mm 3900*1950*2550 Aperture mm 140-325 Drilling depth m 260 Feed stroke mm 3000 Travel speed km/h 2.5 Grade ability max. 30° Rising height from ground mm 250 Wind pressure mpa 1.7-3.0 Air consumption m³/min 17-35 Engine power kw 85 Rotary speed rpm 40-70 Rotation torque n.m 7000-9000
1. Brief introductions of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D pneumatic-electric DTH drilling rig is a new type of high efficient drilling rock equipment designed for water conservancy projects and construction sites. It is widely used for drilling in all kinds of rock strata in open pit, water conservancy and construction slope treatment. KQZ-70D pneumatic-electric DTH drilling rig is a percussive rotary drilling rig. Its internal structure is different from that of a general jack drill. Its valve train and reciprocating piston mechanism are independent, that is impactor. The front is directly connected to the bit, and the back is connected to the drill pipe. when drilling the rock, the impactor dive the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2. Features of KQZ-70D pneumatic-electric DTH drilling rig Small in size, light in weight, suitable small space that large and medium-sized drilling rig can not work , convenient and flexible. 3.Specifications of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D Borehole diameter mm 50-80 Drilling depth m 10-15 Rotating speed r/min 112 Air consumption m³/min 3.5-4.5 Cylinder diameter mm 90 Drilling pipe mm 42 Motor power kw 3 Main engine length mm 1524 Main engine weight kg 148
1.Brief introductions of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D pneumatic-electric DTH drilling rig is a new type of high efficient rock drilling equipment, designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment. KQZ-100D pneumatic-electric DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When it is divided into the hole, the impactor will rotate in hole. the piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2.Features of KQZ-100D pneumatic-electric DTH drilling rig Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible. 3.Specifications of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D Borehole diameter mm 65-150 Borehole depth m 20-25 Rotating speed of drilling tools r/min 90 Air consumption m³/min 6-8 Cylinder diameter mm 150 Drilling pipe mm 50/ 60 Motor power kw 4 Main engine length mm 2400 Main engine weight kg 224
1.Brief introductions of KHYD110 electric rock drilling rig ·The electric rock drilling rig can be fitted with drill stand, and can be drilled horizontally or upward in any direction. ·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining. ·In the operation of electric motor rock drilling rig, we only need to operate the handwheel, and the electric motor rock drilling rig can advance itself and return quickly. 2.Specifications of KHYD110 electric rock drilling rig Model Unit KHYD110 Rated output power of motor kw 5.5 Rated voltage of motor v 380/660 Rated frequency of motor hz 50 Rated current of motor a 11.6 Motor speed r/min 1440 Motor phase number three phase communication Rated working mode continuity Drilling speed mm/min 280 Speed of return m/min Borehole diameter mm 42-80ï¼?rockï¼? Hardness range protodikonov`s scale of hardness f
1.Brief introductions of ZDY-1250 full hydraulic tunnel drilling rig ZDY-1250 hydraulic tunnel drilling rig is used for coal mine: Z stands for drilling rig; D stands for tunnel; Y stands for hydraulic driven, and 1250 is the maximum output torque of 1250n. m. 2.Applications of ZDY-1250 full hydraulic tunnel drilling rig ZDY1250 tunnel drilling rig is mainly used for drilling holes of gas pumping (row), grouting hole, water injection hole, anti process and pressure relief hole, geological exploration hole and other engineering drilling holes. Drilling rig can drill holes in the range of azimuth and dip angle specified in the basic parameter table. 3.Specifications of ZDY-1250 full hydraulic tunnel drilling rig Project Unit ZDY-1250 Maximum drilling depth m 200 Open hole diameter mm Ф87/Ф115 End hole diameter mm Ф65/Ф75 Drilling pipe diameter mm 50 Drilling angle ° -90-+90 Rated output rotating speed r/min 80/170 Rated output torque n.m 1250/600 Rated power kw 22 Rated voltage v 380/660 Rated current a 42.5/24.5 Feeding force kn 60 Pullout force kn 45 Anchorage force kn 4*45 Rated advance speed m/min 0-1.5 Feed stroke mm 850 Hardness range (protodyakonov scale of hardness) fâ?¤10 Noise db(a) â?¤92 Main engine dimension (long*width*high) mm 2240*1000*1478 Total weight (without drill rod) kg 1820
1.Brief introductions of ZLJ650 grouting reinforcement drilling rig ZLJ-650 grouting reinforcement drilling rig is mainly used for drilling holes with different angles in underground mine, tunnel, subway and slope support. This drilling rig adopts mechanical drive, hydraulic feed with small size, light weight, The drilling rig is reliable and convenient to operate. 2. Specifications of ZLJ650 grouting reinforcement drilling rig Drilling hole diameter 50-113mm Hole depth 200m Drilling pipe diameter 42mm Open hole diameter 50-113mm End hole diameter 56-113mm Vertical rated speed 340 192 112 r/min Vertical shaft torque rating 130/ 230/ 400 n.m Main shaft angle 0-360 Spindle stroke 400mm System pressure rated 8mpa Feeding force 9kn Elevating power 12kn Winch lifting capacity 7.35kn Drum Capacity 26.8m Wire rope diameter 8.85mm Oil pump type YBC-12/80 Motor power 7.5kw Dimension 1200*700*1280mm Total weight 560kg
1. Characteristics of XY-44A hydraulic core drilling rig XY-44A is a hydraulic core drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster core drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XY-44A hydraulic core drilling rig ·Core drilling rig ·Engineering geology exploration, ·hydrology and core drilling ·large diameter foundation piles construction 3. Parameters of XY-44A hydraulic core drilling rig XY-44A hydraulic core drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-1 81KW Electric motor Y225S-4 37KW
1. Characteristics of XY-8 hydraulic core drilling rig ·Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. ·Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. ·Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). ·Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. ·hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents ·Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair. ·The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling. ·With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable. 2. Parameters of XY-8 hydraulic core drilling rig Drilling angel 0-360° Electric motor Y280S-4 /75KW Diesel engine YC6A240-33/ 177KW Spindle 96mm Shanxi Fast Gear 8JS118 transmission and ancillary clutch, safe and reliable. Oil pump type/ model gear oil pump/ CB-32 core speed 2500r/min Displacement 32 ml/r Work pressure 20mpa Max.pressure 25mpa Direction of rotation Right(see from shaft end) Work core speed 700-1800r/min Single rope compensational speed 3-8m/s Single rope compensational load 45kn Form skids type(with sliding base) Rig backward stroke 530mm Dimensions(L*W*H) 3800*1500*2460mm Rig weight 6500kg
1.Brief introduction of QTZ-3 soil sampling drilling rig QTZ-3 soil sampling drilling rig is more humanized and more suitable for researchers in scientific research institutions or universities. The power is further strengthened, which can meet the requirement of soil sampling for 15-20 meters depth. 2.Applications of QTZ-3 soil sampling drilling rig ·Geotechnical engineering investigation; environmental soil survey; agricultural soil survey. ·Ground water survey; coastal geological survey; wetland environment investigation. ·Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling. 3. Technical parameters of QTZ-3 soil sampling drilling rig QTZ-3 soil sampling drilling rig Power power 3.8hp lighter way back flush pull rope oil consumption 0.6 l/h Impact times 2460 r/min Impact energy 35j-70j Core depth 15m-20m Host weight 26kg
1.Brief introductions of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work. 2.Features of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. . 3.Applications of SH30-2A exploration drilling rig The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function. 4.Impact tool of SH30-2A exploration drilling rig The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler. Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c 5.Rotary tool (Not include in standard configuration). Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter, 6.Specifications of SH30-2A exploration drilling rig SH30-2A exploration drilling rig Drilling depth 30m Drilling pipe diameter 42mm Aperture diameter 142mm End hole diameter 110mm Drill form and vertical height 4 legs, 6m Power Motor Y132S2-2/ 7.5kw/3000 r/min Diesel engine D180Z/ 8hp/2400 r/min Windlass Lifting speed 0.24/ 0.57/1.48m/s Maximum lifting power (single rope, low speed) 15kn Turntable Diameter 150mm Turntable speed 18/44/110r/min Dimension Length*width*height 1780*1010*900mm Weight 500kg
1.Features of KY-150 hydraulic exploration drilling rig for metal mine KY-150 hydraulic exploration drilling rig for metal mine is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds. KY-150 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling. KY-150 hydraulic exploration drilling rig for metal mine uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling. 2.Components of KY-150 hydraulic exploration drilling rig for metal mine The KY-150 hydraulic exploration drilling rig for metal mine adopts the structure of full hydraulic power head, and consists of three parts: main engine, pump station and operating floor. 3.Specifications of KY-150 hydraulic exploration drilling rig for metal mine Borehole diameter 36.5mm/46.5mm Drilling depth 150ï¼?Ï?33 steel drill pipeï¼?/120ï¼?Ï?43 steel drill pipeï¼?/150(Ï?43 aluminum alloy drill pipe) Borehole angle 0°-360° Spindle speed 400-1400 r/min Spindle output torque 87-300 n.m Rated pull force 30 kn Rated pull speed > 0.3 m/s Oil supply mode double gear pump Hydraulic oil mode antiwear hydraulic oil YB-N46/YB-N32 (winter) Motor model manual variable motor A6V55MA Motor specifications Y180M-4/18.5 kw Equipment weight main engine166kg/backbone 40kg/operation floor 86kg/power car 210kg
1.Introduction of JDL-300 mud/air drilling rig JDL-300 mud/air drilling rig is a water well drilling rig that mix mud drilling rig and air drilling rig in one equipment with mechanical top head. It is a good solution to the difficulty of drilling in the soil layer for DTH rig and the low efficiency of drilling for mud rotary rig in the hard rock, gravel and pebble layer. The mud/air drilling rig adapts to various soil strata. The mud/air drilling rig is efficiency and energy saving to drill water well and geological exploration of core sample. 2.Features of JDL-300 mud/air drilling rig ·The rig can be equipped with a five-speed manual integrated gearbox, hydraulically separated bearings, full synchronizer shifting, high reliability and long service life. ·The drilling rig adopts a mechanical winch, which has a fast lifting speed and is easy to handle the bottom hole accident. 3.Parameters of JDL-300 mud/air drilling rig JDL-300 mud/air drilling rig Working stratum Loose soil layer and bed rock(hardness:F6~20) Drilling method Mechanical top head rotation, hydraulic feeding, work with mud pump or DTH. Drilling capacity Φ42 Mud drilling depth 530m NQ wireline coring 600m Φ75 Air Drilling depth 300m Borehole dia. â?¤Î¦350 Power Diesel engine model YN27 Rated power 42kw Rated speed 2400rpm Drive head Rotary speed 50~10200r/min Max. torque 5000N.m Feeding system Lifting capacity 4T Thrusting capacity 2.1T Winch capacity Hydraulic tool winch(optional) 1.5T Mechanical winch 4.5T Drill pipe Drill pipe dia. Φ76/Φ89/Φ102 Drill pipe length 3000mm Crawler chassis Walking speed 0~2km/h Climbing angle 20° Dimension Transport 5380*1575*2500mm Working 3480*1575*6280mm 4380kg Air compressor Air pressure 10.5~24.6bar Air consumption 16~35m³/min The above parameters are subject to change without prior notice. Shandong Master Machinery Group specializes in mud/air drilling rig. The main models are JDL-300 and JDL-400.
1.The applications of KQZ-180D pneumatic water well drilling rig KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use. 2.The specifications of KQZ-180D pneumatic water well drilling rig Drilling hole diameter 100-219mm Drilling depth 150m Drilling angle ground to 45-90° Feed stroke 1500mm Motor power 7.5kw Rotary speed 0-78rpm Wind pressure 0.8-2.1mpa Air consumption 13-21L/min Gross weight 600kg
1.The applications of FY300 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling, ·drilling with large diameter and deep drilling footage ·Its fast, flexible and efficient 2.The specifications of FY300 crawler pneumatic water well drilling rig Model FY300 Gross weight t 8.8 Dimension mm 4350*1850*2750 Aperture mm 140-325 Drilling depth m 300 Feed stroke mm 6000 Travel speed km/h 2 Grade ability max. 30° Rising height from ground mm 230 Wind pressure mpa 1.7-3.3 Air consumption m³/min 23 Engine power kw 85 Rotary speed rpm 55-115 Rotation torque n.m 7200-8500
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1. Brief introductions of QTZ-1 soil sampling drilling rig QTZ-1 soil sampling drilling rig is comparable to a huge hydraulic and pneumatic drilling rig. The drilling rig is a dynamic gasoline driller used for soil sampling, The rig uses gasoline power and is simple in operation. The rig is safe and stable in performance. It can greatly reduce the labor force, taking into account the rapid and simple sampling speed. 2.Applications of QTZ-1 soil sampling drilling rig ·Geotechnical engineering investigation,environmental soil survey,agricultural soil survey. ·Groundwater survey,coastal geological survey,wetland environment investigation. ·Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling. 3. Technical parameters of QTZ-1 soil sampling drilling rig QTZ-1 soil sampling drilling rig Power power 2.8hp fire mode backflush pull rope oil consumption 0.5l/h Impact times 1500r /min Impact energy 20J-55J Core depth 5m-10m Host weight 23kg
1.Brief introductions of KY-200 hydraulic exploration drilling rig for metal mine KY-200 hydraulic exploration drilling rig for metal mine is widely used for tunnel and surface geological exploration and can drill the hole from any angle. The KY-200 hydraulic exploration drilling rig for metal mine adopts the structure of all hydraulic power head and consists of three parts: main engine, pump station and operation floor. The hydraulic exploration drilling rig for metal mine is easy to disassemble and is convenient to transport. The drilling rig arrangement is flexible. Drilling pipe screwing and unscrewing is mechanized. It can save labour cost and improve work efficiency. And it has infinitely variable speeds. KY-200 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe through controlling the operation floor. The spindle of the gyration adopts the through hole structure. The length of the drill rod is not restricted by the drilling machine, and it can also be applied to the diamond wire-line coring drilling. 2.Specifications of KY-200 hydraulic exploration drilling rig for metal mine Drilling pipe diameter (mm) 33 43 Output torque (n.m) 81-295 Borehole depth (m) 200 160 Feed capability(kn) 27 Feeding stroke (mm) 850 Pullout capability (kn) 20 Spindle speed (r/min) 600-2000 Motor power (kw) 22
1.Brief introductions of SJD-2A portable electric water well drilling rig electric water well drilling rig are widely used in household/factory water wells, irrigation Wells, installation of water air conditioning, construction piling and so on. The electric water well drilling rig bit produced by the company can be optionally equipped with drill bit, the price of drill bit is calculated separately.It can also be equipped with a drill pipe, with a diameter of 32mm and the length about 1.8m. 2.Features of SJD-2A portable electric water well drilling rig The whole machine is about 8KG, and it is easy to carry.Power 220V electric ,household two-phase electrical lighting, motor power 1200W or 1500W.The motor can be multi-stage variable speed, positive and negative, and easy to operate.The well drilling depth can reach 50 meters, the wellhead diameter is 50-180mm, the general drill bit 50-180mm, the special specification can be customized.The diameter of the drill pipe is 32mm or 42mm and a length is 1m to 2m.
