Rig features
1.New hydraulic technology, large torque hydraulic motor rotation and the propulsion of the large-diameter hydraulic cylinder.
2.Power for the hydraulic system from the famous engine, the two-stage air filter and the intake air leading the compressed air to prolong the service life of the diesel engine.
3.Unique pump design, easy to maintenance, reduce maintenance costs. 4. Centralized control of the hydraulic console for easy operation.
4. This series of rigs using excavator crawler chassis, off-road performance.
5.Two-stage rotation and propulsion speed to meet the needs of different wear and tear in the soil and rock formations.
6.Combined locator, according to different types of drill pipe and impactor to adjust the replacement of the positioning plate to ensure accurate an d reliable positioning centering.
7.Hoisting mechanism to facilitate the lifting of the drill pipe and the impactor, reducing labor intensity.
Product Feature:
(1)With the hydraulic automatic feeding mechanism, improve drilling efficiency, reduce the labor intensity of workers.
(2)The ball card holding mechanism instead of the chuck, and is equipped with a clamping positioning mechanism can be implemented without shutdown rod.
(3)Equipped with a pressure gauge instructions at the bottom of the bore pressure, easy to master the hole.
(4)The handle is centralized, and the operation is convenient.
(5)Compact structure, power drill and are installed on the same base, small occupied area.
(6)Light weight, decomposition and strong, easy to move, suitable for plain or mountains.
(7)Equipped with safety protection cover, highlighting the design features of the humanized equipment.
(8)For the oil tank bottom and vertical axle box joint with a fixed nut, enhance the reliability rig. Rated rig drilling depth of 200 m, the deepest shall not exceed 220 m. Rated hole diameter is 200 mm. The biggest opening allows 300 mm diameter. Drilling depth and drilling diameter should be according to the stratigraphic conditions.
5744 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
1 Engineering geological survey of railway, hydropower, traffic, bridge, dam foundation and other buildings.
2 Geological core drilling, physical survey.
3 Small grouting Confucius, blasting hole drilling.
4 Small wells drilled.
Rig features
1 With hydraulic feed mechanism to improve drilling efficiency, reduce labor intensity.
2 The rig is equipped with a card-holding mechanism and a hexagonal active drill pipe. It can be turned down without stopping the machine. High efficiency, convenient and safe.
3 With a pressure gauge at the bottom of the hole to facilitate the control of the situation inside the hole.
4 Handle centralized, easy to operate.
5 Compact structure, small size, light weight, strong decomposition, easy to relocate.
1. It improves drilling efficiency and reduces labor intensity With hydraulic automatic feeding mechanism.
2. It can be achieved without stopping to change rods, easy to operate, safe and reliable with ball clip holding mechanism or hydraulic chuck.
3. It has hole bottom pressure gauge to be easy to master the situation in the hole.
4. It also has advantage of Compact structure, concentrated handle, small footprint, light weight, strong decomposition, easy to move. It can be operated in plains and mountain areas.
1)The rig is equipped with latest MW525 heavy truck transmission,which owns 10 forward gears and 2 reverse gears.The transmission ensures enough reasonable speed range,and can satisty needs of different drilling technology.
2)The rig's spindle inner diameter is 96mm, driven by mechanical system,can output big torque.The winch can lift max.3000kg with single line.
3)Hydraulic system controls the feeding pressure and speed of the spindle.The machine is equipped with pressure meter so that the workers can grasp hole situation.
1. ST-150 Rotary Borehole Water Well Drilling Rig Equipment with hydraulic feeding device, elevated drilling efficiency, reduced labor strength.
2.The ST-150 Rotary Borehole Water Well Drilling Rig Equipment is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable.
3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole.
4. ST-150 Rotary Borehole Water Well Drilling Rig Equipment designed into compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
1.Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate.
2..Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc.
3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users.
4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface.
5. the chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
1.The machine mainly used for underground internal various angle water prospecting, exploration of coal, gas drainage, dust protection and water injection and other uses of the drilling.
2.360 degrees rotary drilling drilling of 50-300m.
3.It can also be used on the ground geological exploration, building foundation reinforcement and other uses of drilling.
Product Features:
a. Keeping bracket is installed on the hosit to form a double wheel support structure, able to withstand strong blow
b. Vertical box are fixed by four groups of bearings to ensure that the rotary machine has sufficient rigidity to overcome gravel layer and other complex geological conditions.
c. the machine is equipped with national patent technology---taper clutch, with charactristics of strong transmission troque, easy operation and free maintenance.
d. 53 x 59 drilling rod adopted, high rigidity and strong delivery torque.
This equipment is a kind of full multifunctional and steady function deep core drilling rig.It suitable for alloy/diamond core drilling,widely used for exploration and gelogical survey,construction project,water-power engineering project,highway,railway and seaport drilling project.Also suitable for drill a water well .
Advantage of this machine:
1. Adopt auto vehicle transmission and cluth,good speed gear,easy operation.
2. Taper clutch with outstanding transmission torque, easy operation and maintenance-free features
3. With light structure,easy disassemble,convenient to move.
4. Four sets of bearing positioning of the vertical axle box ensure that the gyrator has sufficient rigidity to deal with complex geological conditions such as gravel layer and pebble layer.
1. Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate.
2. Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc.
3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users.
4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface.
5. The chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
1. Very powerful at soil, sand, hard rock, etc. land condition.
2. Three kinds drill bits (three-wing bit, alloy bit and diamond bit) available for your choice, which can drill both soft and hard ground, especially diamond drill bit effective in drilling hard rocks.
3. Hydraulic control system for greatly improving the working efficiency, saving labor force.
4. Mounted wheel or trailer, can be hauled easily by car or tractor, convenient to transport.
5. Power can be diesel engine or electric motor, as per your request.
Advantages
1. This machine gained 3 national practical new-type patents invention.
2. To be equipped with hexagonal vertical shaft and hexagonal drive drilling rod, with strong rigidity and big transfer torque.
3. To be provided with cone plate friction clutch, being facile to operate, with big transfer torque.
4. To adopt rolling bearing type hoist, with wide brake band and big lifting capacity.
5. To be equipped with speed reducer and sludge pump, being integrated structure.
6. The entire machine is featured by strong adaptability, high motive power, low cost and broad compatibility.
7. To be provided with hydraulic control pressure feed mechanism for the purpose of improvement of construction efficiency.
8. To use hydraulic control well head displacement mechanism for enlargement of initial hole diameter.
ST-100 core drilling machine is a light type core drill rig at high speed with hydraulic feeding.
1.With hydraulic feeding device, elevated drilling efficiency, reduced labor strength.
2.The rig is equipped with an upper spherical jaw holding mechanism and hexagonal Kelly, which can be replaced without shutdown, high efficiency, safe and reliable.
3.A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole.
4.Compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
1.High efficiency and saving labor intensity .with hydraulic automatic feeding mechanism, improve the drilling efficiency, reduce labor intensity.
2.Safe and reliable.Using the ball cassette clamping device, and can down bar without stopping ,and it is convenient to operate.
3.Easy to operate.Equipped with a pressure gauge at the bottom for measuring pressure of the bore , easy to operate.
Product Features
Water
a. five gears, and the highest speed can reach 1045r/min, improving drill efficiency
b. 53 x 59 drilling rod adopted, high rigidity and strong delivery torque.
c. the machine is equipped with national patent technology---taper clutch, with charactristics of strong transmission troque, easy operation and free maintenance.
d. for the winch, we use large module planetary gear and add supporting frame, greatly increasing hoisting and braking ability of the winch.
e. Vertical spidle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geoloical conditions.
Product Applications
ST-100 drilling rig is mainly used for geological general investigation and exploration, road and tall buliding foundation exploration, kinds of hole in concrete structure, river levees,earth temperature central air-conditioner,etc.
Domed Type PDC Cutter
Flat Face PDC cutter for Coal mining,Geological exploration,Stone processing.
1. Shape:Flat shape,Sharp-edged shape,Cambered shape;
2. Application:Making geological and coalmine drill bits for medium-hard rocks;for geological&coalmine drill bits for soft rocks;making geological&coalmine drill bit for hard rocks;
3. Advantages:High wear resistance and impact resistance;faster rock breaking speed in soft rocks;longer useful life,and High impact resistance in hard rocks.
Flat Shape PDC Cutters for Oil and Gas Drilling.
Size: 0808, 1004, 1008, 1204, 1304, 1308, 1313, 1608, 1613, 1616, 1908, 1913,1916, 1919, etc.
Application:With high hardness, abrasion resistance and impact resistance, they are widely used for oil/gas drill bits;
Main Features:
1. Very powerful at soil, sand, hard rock, etc. land condition.
2. Three kinds drill bits (three-wing bit, alloy bit and diamond bit) available for your choice, which can drill both soft and hard ground, especially diamond drill bit effective in drilling hard rocks.
3. Hydraulic control system for greatly improving the working efficiency, saving labor force.
4. Mounted wheel or trailer, can be hauled easily by car or tractor, convenient to transport.
5. Power can be diesel engine or electric motor, as per your request.
Advantages
1. This machine gained 3 national practical new-type patents invention.
2. To be equipped with hexagonal vertical shaft and hexagonal drive drilling rod, with strong rigidity and big transfer torque.
3. To be provided with cone plate friction clutch, being facile to operate, with big transfer torque.
4. To adopt rolling bearing type hoist, with wide brake band and big lifting capacity.
5. To be equipped with speed reducer and sludge pump, being integrated structure.
6. The entire machine is featured by strong adaptability, high motive power, low cost and broad compatibility.
7. To be provided with hydraulic control pressure feed mechanism for the purpose of improvement of construction efficiency.
8. To use hydraulic control well head displacement mechanism for enlargement of initial hole diameter.
1.Brief introductions of BXZ-1 backpack core drilling rig
BXZ-1 is a core drilling rig that can drill up to 20 meters. The portable design allows the rig to fit in tighter spaces than traditional larger drill rigs but still has plenty of power to get the job done. This rig is perfect for drilling in remote locations.
2.Applications of BXZ-1 backpack core drilling rig
·mineral prospecting
·geotechnical engineering
·geoscientific research
·tunnel lining
·inflected arch detection
·highway engineering geological exploration
·hydraulic engineering geological exploratory
·oil exploration
·lode prospect
3.Features of BXZ-1 backpack core drilling rig
·portable : a complete set of BXZ-1 can be packed into a backpack that can be carried by one adult
·efficiency and effective: BXZ-1 can work in almost any type of soil conditions
·easy to disassemble
·simple to operate
4.Configuration list of BXZ-1 backpack core drilling rig
Item Parameter Unit Quantity
Drilling rig 3.2hp/mitsubishi set 1
Drill pipe 33*700mm pc 28
Drill joint 33*100mm pc 28
Core barrel 33*600mm pc 1
Reducing nipple pc 1
Alloy bit 33mm pc 1
Compact bit 33mm pc 1
Diamond bit 33mm pc 1
Manual mud pump set 1
Mud pump ( gasoline engine) high pressure set 1
Maintenance kit set 1
Outlet hose pipe set 1
Inflow water filter pc 1
Inlet hose pipe set 1
Oil & gasoline mixing container pc 1
Safety clamp pc 1
Pipe wrench pc 1
Specialized backpack pc 1
Shandong Master Machinery Group Co.,Ltd.
Sales Manager: Kevin
Tel:0086-537-2335787
Mob: 0086-18865479503
Wechat:008618865479503
Whatsapp:008618865479503
QQ: 256618593
E-mail:sale03@huaxiamaster.com
Website:www.huaxiamaster.com
5744 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
