Product Application: 1. Portable Rotary Water Drilling Rig Machine for the general exploration and investigation of solid mineral deposit, engineering geotectonic survey and concrete structure inspection holes. 2.Diamond drill bit, alloy drill bit and steel roller drill bit and so on are available for drilling according to different geological structures. 3.When the final holes are respectively 75mm and 46mm in diameter, the rated hole depths are separately 100m and 180m. The maximum of depth may not exceed 110% of that drilled in each hole. The maximum allowable hole diameter is 150 mm.
Product Features 1. These water well drilling rig are small size, light weight, easy to install. 2. These water well drilling rig three major components, host, pump station, console. 3. In the original transport, prospecting roadway can be put into production, the overall structure of the mine play a protective role. These water well drilling rig can also be used for surface 0-90 degree drilling. 4. Rig layout flexible, mechanized twist drill pipe, reduce labor intensity, improve work efficiency. 5. The use of box-type to the rack, the holder to tighten, power head rotary drilling, cylinder pull drilling tools, Save the bulky rig. 6. With a linkage function, through the console centralized control, simple and safe, stepless speed. 7. Hollow shaft design, drill pipe length is not limited by drilling rig. Can be drilled at any angle of 360 °. 8. Disintegration is good, easy to move and transport. Φ33-Φ43 drill pipe can be used with the machine, the replacement only 15 minutes.
1. Power can be equipped by electrical motor or diesel engine, as per your project needs; 2. Hoist adopts Frictional clutch mechanism, using powder metallurgy friction plate,with good performance and long service life; With rapid and convenient hydraulic movable base, reliable hydraulic position locking, greatly improve the working efficiency before drilled hole, such as adding and taking off the drill rods ; 3. Hydraulic part: piston rod adopts stern sealing ring(sealing ring for shaft),hydro-cylinder piston adopts Glyd ring(sealing ring for hole), up to international advanced level, with good sealing performance and durability; 4. Easy to be disassembled, installed and operation. 5. With large rotary torque which are better than the other same level drilling machines.
Product Feature: 1. ST-200 Rotary Borehole Water Well Drilling Rig Equipment with hydraulic feeding device, elevated drilling efficiency, reduced labor strength. 2.The ST-200 Rotary Borehole Water Well Drilling Rig Equipment is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable. 3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole. 4. ST-200 Rotary Borehole Water Well Drilling Rig Equipment designed into compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
1. ST-100 water well drilling rig a. the machine is equipped with crawler chassis device,easy to move with fast speed. b hydraulic oil pressure feed device,improve drilling defficiency. c. pressure gauge display the condition of the bottom of the drill hole. d drill mast controlled by hydraulic cylinder,improve the efficiency diesel engine adopt the electric starter,to reduce the labor itensity. 2. Applications of ST-100 Water Well Drilling Rig ST-100 drilling rig is mainly used for geological general investigation and exploration,road and tall buliding foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole,drilling and driect grouting,civil wellsand earth temperature central air-conditioner,etc.
Particularly recommended 1. 53*59 drilling rod adopted,high rigidity and strong delivery torque. 2. The machine is equipped with national patent technology: taper clutch,with characteristics of strong transmission torque,easy operation and free maintenance. 3. For the winch,we use large module planetary gear and add supporting frame,greatly increasing hoisting and braking ability of the winch. 4.Vertical spindle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions. 5. We are the first one to equip mud pump with the flow 160L/Min in china so that it will save cost and also make the machine compact,mobile and lightweight. The application of drilling rig machine: ST-100 drilling rig is mainly used for geological general investigation and exploration,road and tall buliding foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,etc.
Rig Application: 1. The rig is suitable for survey and prospecting, geophysical exploration, roads and buildings and other exploration and play blasthole drilling bits projects. 2. Drilling bits can be chosen according to different strata . Rig Features 1. Hydraulic automatic feed mechanism, improve drilling efficiency, reduce manual labor workers. 2. Ball holding mechanism instead of using the chuck, can implement non-stop down the lever, easy to operate, safe and reliable. 3. With bottom hole pressure gauge indicates the pressure, easy to grasp hole situation. 4. The handle centralized, easy to operate. 5. Light weight, decomposition and strong, easy to move, adapted to the plains or mountain areas.
Drill rig characteristics 1. Centralized handles, easy operation, safe and reliable 2. Lightweight, high detachability 3. Easy transportation 4. Can drill hard rocks, there are two kinds of drill bits ST series Core Drilling Rigs are suited for the applications of general exploration and investigation, geophysical prospecting, road and construction survey, blast holes and other drilling operations. This drill rig be applicable to solid mineral bed explores and work the distance geology investigates etc,drills a hole and every kind of concrete construction check bore. Applications 1. With hydraulic automatic feeding device, elevated drilling efficiency. 2. The holding mechanism with upper spherical jaws is used as substitute for chuck. The rod can be replaced without shutdown. 3. Centralized handles, easy operation, safe and reliable. 4. The drilling machine, pump and Diesel engine are installed on a common base frame in order to have a compact structure and occupy small field area. 5. Lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
Product Features: Spindle type mechanical transmission, hydraulic feed. Hydraulic retracting lets drill body away from the drilling hole. Hydraulic chuck, hand-powered chuck and hand-powered cylinder chuck, they are exchangeable. Friction hoist, percussion drilling, easy to pull and push casing if equipped with vibrator. Advanced design, reasonable arrangement, compact structure, beautiful looking. Light weight, good detachability, easy to operate. Equipped with special 6mA type derrick for user ordering. Product Parameter: Drilling depth 200m Hole(Drill bit) diameter (mm) Φ115-350 Adaptable formations Loose soil and bedrock (Hardness f=6~20) Drilling method Top drive rotation, hydraulic feeding, work with mud pump or DTH hammer Rotary speed (rpm) 60�160 Torque (N.m) 5000�6500 Feeding force (Ton) 8 Lifting force (Ton) 16 Tool winch lifting force (Ton) 1.5 Drill pipe dia. Φ76/Φ89 Drill pipe length 3000 Air pressure (Mpa) 1.05-2.46 Air consumption (m3/min) 16-35 Diesel engine YN33GBZ Engine parameter 65kW/2400rpm Walking speed 0�2.5 Climbing capacity 20 Distance from ground 250 Dimension (mm) 4000x1900x2600 Unity weight (kg) 6000
Rig features 1.New hydraulic technology, large torque hydraulic motor rotation and the propulsion of the large-diameter hydraulic cylinder. 2.Power for the hydraulic system from the famous engine, the two-stage air filter and the intake air leading the compressed air to prolong the service life of the diesel engine. 3.Unique pump design, easy to maintenance, reduce maintenance costs. 4. Centralized control of the hydraulic console for easy operation. 4. This series of rigs using excavator crawler chassis, off-road performance. 5.Two-stage rotation and propulsion speed to meet the needs of different wear and tear in the soil and rock formations. 6.Combined locator, according to different types of drill pipe and impactor to adjust the replacement of the positioning plate to ensure accurate and reliable positioning centering. 7.Hoisting mechanism to facilitate the lifting of the drill pipe and the impactor, reducing labor intensity.
Used for general investigation, geophysical exploration, highway and building construction, and blast-hole drilling etc. With hydro-automatic feeding device, and high drilling efficiency. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. Close levers, convenient to operate, safe and reliable operations. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas
Features: (1) Oil pressure automatic feeding structure improves drilling efficiency and reduces labor strength. (2) Use ball clip clamping mechanism to replace chuck, and has clamping positioning mechanism to carry out drill pile feeding without shut down. (3) Centralized handles and convenient operation. (4) Compact structure, the drill and power engine are installed on the same chassis, then it has small occupation area. (5) Light weight, strong decomposability, easy to move makes it suitable for working in plain or mountain area. (6) Installed safety guard shows its humanization design feature. (7) There are fixed nuts on bottom of feeding oil cylinder and vertical shaft box to enhance the reliability of drill. Technical parameters: (1) Rated drilling depth: 200m (2) Rated boring diameter: 200mm, max. boring diameter: 300mm (3) Vertical shaft rotation speed (4 shifts): 118, 236, 505, 1010.r/min (4) Vertical shaft max. output torque: 1500N*m (5) Max. hositing weight single line): 17KN (6) Drilling rod diameter: 42mm (7) Drilling dip angle: 90~75° (8) Drill outside diameter (L*B*H): 1433*697*1273mm (9) Drill weight: 500kg (10) Diesel engine model: S1110
Product Feature: (1)With the hydraulic automatic feeding mechanism, improve drilling efficiency, reduce the labor intensity of workers. (2)The ball card holding mechanism instead of the chuck, and is equipped with a clamping positioning mechanism can be implemented without shutdown rod. (3)Equipped with a pressure gauge instructions at the bottom of the bore pressure, easy to master the hole. (4)The handle is centralized, and the operation is convenient. (5)Compact structure, power drill and are installed on the same base, small occupied area. (6)Light weight, decomposition and strong, easy to move, suitable for plain or mountains. (7)Equipped with safety protection cover, highlighting the design features of the humanized equipment. (8)For the oil tank bottom and vertical axle box joint with a fixed nut, enhance the reliability rig. Rated rig drilling depth of 200 m, the deepest shall not exceed 220 m. Rated hole diameter is 200 mm. The biggest opening allows 300 mm diameter. Drilling depth and drilling diameter should be according to the stratigraphic conditions.
The main purpose and characteristics 1 Engineering geological survey of railway, hydropower, traffic, bridge, dam foundation and other buildings. 2 Geological core drilling, physical survey. 3 Small grouting Confucius, blasting hole drilling. 4 Small wells drilled. Rig features 1 With hydraulic feed mechanism to improve drilling efficiency, reduce labor intensity. 2 The rig is equipped with a card-holding mechanism and a hexagonal active drill pipe. It can be turned down without stopping the machine. High efficiency, convenient and safe. 3 With a pressure gauge at the bottom of the hole to facilitate the control of the situation inside the hole. 4 Handle centralized, easy to operate. 5 Compact structure, small size, light weight, strong decomposition, easy to relocate.
Product Features: 1. It improves drilling efficiency and reduces labor intensity With hydraulic automatic feeding mechanism. 2. It can be achieved without stopping to change rods, easy to operate, safe and reliable with ball clip holding mechanism or hydraulic chuck. 3. It has hole bottom pressure gauge to be easy to master the situation in the hole. 4. It also has advantage of Compact structure, concentrated handle, small footprint, light weight, strong decomposition, easy to move. It can be operated in plains and mountain areas.
Product Description: 1)The rig is equipped with latest MW525 heavy truck transmission,which owns 10 forward gears and 2 reverse gears.The transmission ensures enough reasonable speed range,and can satisty needs of different drilling technology. 2)The rig's spindle inner diameter is 96mm, driven by mechanical system,can output big torque.The winch can lift max.3000kg with single line. 3)Hydraulic system controls the feeding pressure and speed of the spindle.The machine is equipped with pressure meter so that the workers can grasp hole situation.
1. ST-150 Rotary Borehole Water Well Drilling Rig Equipment with hydraulic feeding device, elevated drilling efficiency, reduced labor strength. 2.The ST-150 Rotary Borehole Water Well Drilling Rig Equipment is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable. 3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole. 4. ST-150 Rotary Borehole Water Well Drilling Rig Equipment designed into compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
Product Description: 1.Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2..Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. the chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
Product Introduction: 1.The machine mainly used for underground internal various angle water prospecting, exploration of coal, gas drainage, dust protection and water injection and other uses of the drilling. 2.360 degrees rotary drilling drilling of 50-300m. 3.It can also be used on the ground geological exploration, building foundation reinforcement and other uses of drilling. Product Features: a. Keeping bracket is installed on the hosit to form a double wheel support structure, able to withstand strong blow b. Vertical box are fixed by four groups of bearings to ensure that the rotary machine has sufficient rigidity to overcome gravel layer and other complex geological conditions. c. the machine is equipped with national patent technology---taper clutch, with charactristics of strong transmission troque, easy operation and free maintenance. d. 53 x 59 drilling rod adopted, high rigidity and strong delivery torque.
This equipment is a kind of full multifunctional and steady function deep core drilling rig.It suitable for alloy/diamond core drilling,widely used for exploration and gelogical survey,construction project,water-power engineering project,highway,railway and seaport drilling project.Also suitable for drill a water well . Advantage of this machine: 1. Adopt auto vehicle transmission and cluth,good speed gear,easy operation. 2. Taper clutch with outstanding transmission torque, easy operation and maintenance-free features 3. With light structure,easy disassemble,convenient to move. 4. Four sets of bearing positioning of the vertical axle box ensure that the gyrator has sufficient rigidity to deal with complex geological conditions such as gravel layer and pebble layer.
