1.Brief introductions of HZ-130YY hydraulic core drilling rig HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage. 2.Applications of HZ-130YY hydraulic core drilling rig ·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes. ·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite. ·2-9 grades of sandy clay and rock. 3.Features of HZ-130YY hydraulic core drilling rig ·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers. ·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable. ·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact ·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on. This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance. 4.Technical parameters of HZ-130YY hydraulic core drilling rig HZ-130YY hydraulic core drilling rig Drill hole depth 130m Maximum opening diameter 75-220mm Final hole diameter 75mm Take the initiative to drill pipe 53/59*4200mm Drill pipe diameter 50mm Borehole inclination 90°-75° Power(diesel engine) 13.2kw 2200r/min Size 850kg/2400*950*1400 Vertical shaft Vertical spindle speed 142/285/570r/min Vertical stroke 450mm Hoist Single rope lift 9.6kn Single rope winding speed 0.41/0.82/1.64m/s Drum diameter 140mm Diameter of wire rope 9.3mm Wire rope capacity 27m Derrick Rated load 2t Effective height 6m Towerleg specifications 73mm Mud pump Model BW95 Flow 95l/min Maximum pressure 1.2mpa Reciprocating frequency 93r/min Suction pipe diameter 51mm*4.5m Diameter of high pressure pipe 32mm*6m
1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm
1.The features of XYD-130 crawler hydraulic core drilling rig The drilling rig adopts the automatic Telescopic style with two high strength oil cylinder support, a set of hydraulic valve control rigs operating supine, which is time-saving, safe and reliable to maximize the benefits for users. The chassis adopts rubber track, light weight and low life cycle cost, which can reduce noise of vehicle running mechanism, reduce car body vibration, and reduce fuel consumption greatly. It can walk on urban roads without hurting the road surface. The chassis is equipped with four high strength threaded legs (or hydraulic high leg). The installation and adjustment is fast and convenient. It can be used for leveling of work plane, loading and unloading vehicle, which reduces the hoisting cost and improves efficiency and works as auxiliary support. The drilling rig uses 48V electricty to start the diesel engine , which greatly reduces the labor usage, especially in the cold season. When the diesel engine has difficulty activiting, this starting mode shows greater advantages. 2.Technical parameters of XYD-130 crawler hydraulic core drilling rig XYD-130 crawler hydraulic core drilling rig Drilling depth 130m Maximum opening diameter 220mm Diameter of the end hole 75mm Drilling rod caliber 50mm Drilling angle 90°-75° Drill weight (no include power) 2600kg Spindle Spindle speed 142/285/570 r/min Spindle stroke 450mm Windlass Max single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64 m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type horizontal single urn twin-action Displacement 95 /77L/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm
1.Features of XYC-3 vehicle-mounted hydraulic core drilling rig XYC-3 is a vehicle-mounted hydraulic core drilling rig.The drilling rig transmission system and hoist, mud pump and other important accessories are all installed on the chassis. The layout is reasonable and compact. And the operation is simple. The drilling rig is equipped with high pressure and large flow BW-250 pump, which ensures the drilling depth and borehole diameter. 2. Applications of XYC-3 vehicle-mounted hydraulic core drilling rig ·geological survey and exploration ·road and high-rise building foundation exploration ·all kinds of concrete structure inspection holes ·river embankments ·subgrade grouting holes ·drilling and direct grouting ·civil use water wells ·ground temperature central air conditioners 3. Parameters of XYC-3 vehicle-mounted hydraulic core drilling rig XYC-3 vehicle-mounted hydraulic core drilling rig Drilling depth 30-600 Drill hole diameter 300-75 Diameter of the end hole 75 Drill angle 90-75 Spindle forward core speed 30-1050 Spindle reverse core speed 29-137 Spindle stroke 600 Main winch lifting force (with single line) 3000 Main winch rope capacity 65 Lifting speed 0.3-1.9 Rope diameter 12.5 Drill mast height 7000 Drill effective height 6500 Driving drilling rod 59*53ã??70*63ã??79*89 Drilling rod diameter 42/50/60 Weight 3500 Engine Model:Yunnei YN27 BW-250 mud pump Rated flow (l/min) 250 Rated power(mpa) 7 Driving power(kw) 15 Host weight(kg) 500 Dimension(mm) 1110*994*665 Chassis vehicle(Pictures of vehicle-mounted drilling rigs for reference only)
Good day! Here is the quotation of our Armor Rocks: 1. Product Description: a. Commodity: Armor Rocks @100,000 MTS PER MONTH b. Form: ARMOR ROCKS 2. Quantity: a. Initial Quantity: 50,000 MTS b. First delivery 50,000 MTS 3) Price: @ 36 USD PER MTS 4) Inclusive of the 36 USD per MT.
PRODUCT INFO : Material: Plastic, Color: Blue Item Dimension: 330mm x 232mm x 72mm Package Contents: 1-Piece Drill Machine 6 months warranty provided by the manufacturer from date of purchase Powerful 450W motor for enhanced performance and increased efficiency Reversible rotatable brush plate for optimum F/R operations Variable speed switch with variable speed dial wheel for optimum output needs Lock-on button for continuous drilli Product Specifications : Brand : Bosch Warranty : 6 Months Manufacturer Warranty Part Number : 06012161FK Dimensions (LXWXH) : 262x69x180 mm No Load Speed : 0-2600 rpm Drilling Capacity (in Concrete) : 10 mm Weight : 1.5 Kg Power Output : 250 W EAN : 3.17E+12 Forward/Reverse : Yes Drilling Diameter(in Steel) : 8 mm Rated Input Power : 450 W Impact Rate : 25700 bpm Drilling Diameter(in Wood) : 20 mm Item Code : GSB 450 RE
1.The brief introductions of SJD-2B collapsible electric water well drilling rig The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on. 2.The specifications of SJD-2B collapsible electric water well drilling rig ·Punching range: 60-250mm; ·Drill pipe diameter: 1.2 inch; ·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters. ·Voltage: 220V ·Rotary motor: 4000W; ·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W; ·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible). ·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.Brief introductions of HZ-130YY hydraulic core drilling rig HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage. 2.Applications of HZ-130YY hydraulic core drilling rig ·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes. ·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite. ·2-9 grades of sandy clay and rock. 3.Features of HZ-130YY hydraulic core drilling rig ·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers. ·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable. ·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact ·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on. This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance. 4.Technical parameters of HZ-130YY hydraulic core drilling rig HZ-130YY hydraulic core drilling rig Drill hole depth 130m Maximum opening diameter 75-220mm Final hole diameter 75mm Take the initiative to drill pipe 53/59*4200mm Drill pipe diameter 50mm Borehole inclination 90°-75° Power(diesel engine) 13.2kw 2200r/min Size 850kg/2400*950*1400 Vertical shaft Vertical spindle speed 142/285/570r/min Vertical stroke 450mm Hoist Single rope lift 9.6kn Single rope winding speed 0.41/0.82/1.64m/s Drum diameter 140mm Diameter of wire rope 9.3mm Wire rope capacity 27m Derrick Rated load 2t Effective height 6m Towerleg specifications 73mm Mud pump Model BW95 Flow 95l/min Maximum pressure 1.2mpa Reciprocating frequency 93r/min Suction pipe diameter 51mm*4.5m Diameter of high pressure pipe 32mm*6m
1.The brief introductions of SJD-2B collapsible electric water well drilling rig The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on. 2.The specifications of SJD-2B collapsible electric water well drilling rig ·Punching range: 60-250mm; ·Drill pipe diameter: 1.2 inch; ·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters. ·Voltage: 220V ·Rotary motor: 4000W; ·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W; ·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible). ·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.The brief introductions of gasoline engine water well drilling rig ·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance. ·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced. ·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors. ·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well. 2 .The features of the gasoline engine water well drilling rig The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on. The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg. Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-400 water well drilling rig ·SPJ-400 water well drilling rig is powered by diesel engine, and can also be driven by motor in electric power area. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usageis: the hydrogeological conditions at the bottom of the exploration and survey; the drilling and drilling for the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate. Use winch system to realized ecompression drilling, lifting drilling,down pipe, impact sampling, vertical drilling tower. 2.The specifications of SPJ-400 water well drilling rig Borehole diameter 500mm-1800mm Drilling depth 400m Maximum output torque 18kn.m Active drill rod 108*108*12mm Drilling pipe 89mm Main indlasslifting power 30kn Assistant windlasslifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min height of the drilling tower 13m Gross weight (excluding drill pipe) 9t External dimension 2200*6000*13000mm Drilling tower type A / hydraulic drilling tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on.
1.The features of SPJ-600 water well drilling rig SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers. The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-600 water well drilling rig Drilling depth 600m Borehole diameter 500mm-2500mm Rotary table latus rectum 605mm Active drillingpipe 108*108*12mm Drilling pipe 89mm Rotary speed 42/75/134kn.m Main windlass single rope lifting power 35kn hook rated load 210kn hook lifting speed 0.15-0.47m/s pulley block model 3*3 wire-rope diameter 20-21.5mm Assistant windlass single rope rated lifting power 15kn maximum lifting power of a single rope 20kn single rope rated lifting speed 0.58m/s wire-rope diameter 9.8mm Windlass power 37kw Gross weight (excluding drillingpipe) 11t
1.The features of SPJ-1000 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 1000 meters, which is suitable for soil, rock and gravel layers. The SPJ-1000 water well drilling rig adopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The drilling rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-1000 water well drilling rig Drilling depth 1000m Borehole diameter 500mm Rotary table diameter 1200mm Rotary table latus rectum 670mm Rotary table weight 2050kg Rotary speed 36/60/90/130r/min Active drilling pipe 133*133*12mm Drilling pipe 89mm or114mm Main windlass single rope lifting force 60t Assistant windlass single rope rated lifting force 30t Windlass power 45kw
1.The applications of KQZ-180D pneumatic water well drilling rig KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use. 2.The specifications of KQZ-180D pneumatic water well drilling rig Drilling hole diameter 100-219mm Drilling depth 150m Drilling angle ground to 45-90° Feed stroke 1500mm Motor power 7.5kw Rotary speed 0-78rpm Wind pressure 0.8-2.1mpa Air consumption 13-21L/min Gross weight 600kg
1.The applications of FY180 crawler pneumatic water well drilling rig ·civil engineering drilling ·geothermal drilling ·drilling with large diameter and deep drilling footage ·It's fast, flexible and efficient 2.The specifications of FY180 crawler pneumatic water well drilling rig model FY180 Gross weight T 3.8 Dimension mm 3800*1550*2350 Aperture mm 130-254 Drilling depth m 180 Feed stroke mm 3000 Travel speed km/h 2.5 Grade ability Max. 30° Rising height from ground mm 250 Wind pressure Mpa 1.7-2.5 Air consumption m³/min 15-27 Engine power kw 42-65 Rotary speed rpm 48-70 Rotation torque N.m 4200-5600 Shandong Master Machinery Group Co.,Ltd. Sales Manager: Ella Liu Tel:0086-537-2335787 Mob: 0086-18865479510 Wechat:008618865479510 Whatsapp:008618865479510 QQ:3048400352 E-mail:sale06@huaxiamaster.com Website:www.huaxiamaster.com
1.The features of XYD-130 crawler hydraulic core drilling rig The drilling rig adopts the automatic Telescopic style with two high strength oil cylinder support, a set of hydraulic valve control rigs operating supine, which is time-saving, safe and reliable to maximize the benefits for users. The chassis adopts rubber track, light weight and low life cycle cost, which can reduce noise of vehicle running mechanism, reduce car body vibration, and reduce fuel consumption greatly. It can walk on urban roads without hurting the road surface. The chassis is equipped with four high strength threaded legs (or hydraulic high leg). The installation and adjustment is fast and convenient. It can be used for leveling of work plane, loading and unloading vehicle, which reduces the hoisting cost and improves efficiency and works as auxiliary support. The drilling rig uses 48V electricty to start the diesel engine , which greatly reduces the labor usage, especially in the cold season. When the diesel engine has difficulty activiting, this starting mode shows greater advantages. 2.Technical parameters of XYD-130 crawler hydraulic core drilling rig XYD-130 crawler hydraulic core drilling rig Drilling depth 130m Maximum opening diameter 220mm Diameter of the end hole 75mm Drilling rod caliber 50mm Drilling angle 90°-75° Drill weight (no include power) 2600kg Spindle Spindle speed 142/285/570 r/min Spindle stroke 450mm Windlass Max single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64 m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type horizontal single urn twin-action Displacement 95 /77L/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm
1. Characteristics of XYC-200 vehicle-mounted hydraulic core drilling rig ·XYC-200 is a multi-function vehicle-mounted hydraulic core drilling rig.Automobile chassis chassis, transmission system and rig winch, mud pump and other important accessories installed in the chassis. the layout is reasonable, compact, and easy to operate. ·It is equipped with high pressure,big flow BW160 mud pump,which can ensure drilling depth and diameter. ·the rig has shifting device, it can move on the vehicle and is convenient to operate while drilling. ·the hydraulic folding mast is safe and convenient to transport 2.Applications of XYC-200 vehicle-mounted hydraulic core drilling rig ·road and high-rise building foundation exploration ·all kinds of concrete structure inspection holes ·river embankments ·subgrade grouting holes ·drilling and direct grouting ·civil water well ·ground temperature central air conditioners. 3. Parameters of XYC-200 vehicle-mounted hydraulic core drilling rig XYC-200 vehicle-mounted hydraulic core drilling rig Drilling depth(m) 30-200 Drilling diameter(mm) 300-75 Drilling angel(mm) 90-75 Spindle rotating speed(r/min) 64/128/287/557 Spindle stroke(mm) 450 Main hoisting capacity (single line)(Kg) 1600 Main hoisting line capacity (m) 35 Hoisting speed(r/s) 17/35/75/151 Wireline diameter(mm) 12.5 Mast height(mm) 7000 Mast effective height(mm) 6500 Kelly/active pipe(mm) 59*53 Drill rod(mm) 42/50/60 Drill rig weight(kg) 1150 Power unit Model ZS1115 diesel engine Rated power 14.7kw/2200rpm BW-160 mud pump Rated flow(l/min) 160 Rated pressure(mpa) 1.3 Driving power(kw) 5.15 Main machine weight (kg) 190 Dimension(mm) 1110*725*965 Chassis light truck(Pictures of vehicle-mounted drilling rigs for reference only) Shandong Master Machinery Group Co.,Ltd. Sales Manager: Ella Liu Tel:0086-537-2335787 Mob: 0086-18865479510 Wechat:008618865479510 Whatsapp:008618865479510 QQ:3048400352 E-mail:sale06@huaxiamaster.com Website:www.huaxiamaster.com
1. Applications of HZ-130Y hydraulic core drilling rig ·geological survey and exploration ·basic exploration for roads ·high-rise buildings ·inspection holes for various concrete structures ·river embankments ·grouting holes ·direct grouting, ·civil water well ·ground temperature central air conditioners. 2.Features of HZ-130Y hydraulic core drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This machine adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 3.Technical parameters of HZ-130Y hydraulic core drilling rig HZ-130Y hydraulic core drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90-75° Drill weight (Not include power) 750kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm
1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm
