Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
Characteristics of XYD-200 crawler hydraulic core drilling rig
·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement.
·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
2. Technical parameters of XYD-200 crawler hydraulic core drilling rig
XYD-200 crawler hydraulic core drilling rig
Drilling depth 200m
Maximum opening diameter 75-300mm
Final hole diameter 75mm
Kelly 53/59*4200mm
Drill pipe diameter 50/60mm
Drilling angle 90°-75°
Auxiliary power diesel engine 16.2kw 2200r/min
Structural weight/Size 3000kg 3800*1950*2700
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Windlass
Single rope lifting force 24kn
Single rope lifting speed 0.12/0.22/0.49/0.95m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 35m
Derrick
Rated load 5t
Effective height 6m
Tower leg specification 89mm
Features of XY-3 hydraulic core drilling rig
·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application
·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient
·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident.
·Equipped with normally closed hydraulic chuck, operation is flexible and reliable
·The independent operation of the vertical shaft and the hoist can be realized
·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod
2. Parameters of XY-3 hydraulic core drilling rig
XY-3 hydraulic core drilling rig
Drilling depth 600m
Borehole diameter 300-75mm
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60
Drilling angle 90°-65°
Spindle
spindle speed 30-1050r/min
Spindle stroke 29-137r/min
Spindle stroke 60mm
Spindle inner diameter 96mm
Lifting capacity 6000kg
Hoist
Max.single line lifting speed 0.5-1.9m/s
Wire rope caliber 12.5mm
Max.single line lifting capacity 4000kg
Reel diameter 300mm
Wire rope length 50m
Maximum lifting capacity of single rope 3000kg
Mud pump
Type Horizontal three cylinder BW-250
Displacement 250l/min
Work pressure 80kg/cm²
Water inlet pipe diameter 75mm
Water outlet pipe diameter 50mm
Gear oil pump
Duplex gear oil pump CBF-F63/25
Front displacement, pressure 63l/min 20mpa
Water outlet pipe diameter 25l/min 20mpa
Power
Diesel engine 39kw
Electric machinery 22kw
Weight size
Drill weight 1800kg
Shape size 2500*900*1800mm
5731 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
Characteristics of XYD-44A crawler hydraulic core drilling rig
XYD-44A crawler hydraulic core drilling rig is a multi-purpose spindle well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XYD-44A crawler hydraulic core drilling rig
·Hydraulic core drilling rig ,
·engineering well drilling ,
·hydrology and water well drilling
·large diameter foundation piles construction
3. Parameters of XYD-44A crawler hydraulic core drilling rig
XYD-44A crawler hydraulic core drilling rig
Drilling depth 600-1400m
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
SpindleÂ
1. The brief introductions of 15 meters crawler rotary pile drilling rig with circular power rod
With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on.
Compared with the ordinary rotary drilling rig,rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable.
2.The features of 15 meters crawler rotary pile drilling rig with circular power rod
The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance.
The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased.
The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain.
The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.
1.The brief introductions of 25 meters crawler rotary pile drilling rig with circular power rod
With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, the rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on.
Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable.
2.The features of 25 meters crawler rotary pile drilling rig with circular power rod
The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance.
The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased.
The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain.
The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.
The quality of the national inspection free raw materials and matching parts is more guaranteed.
The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year.
The hydraulic system exclusive of reasonable matching, the summer temperature is normal excluding radiator.
1. The brief introductions of 28 meters crawler rotary pile drilling rig with circular power rod
With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on.
Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable.
2.The features of28 meters crawler rotary pile drilling rig with circular power rod
The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance.
The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased.
The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain.
The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.
The quality of the national inspection free raw materials and matching parts is more guaranteed.
The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year.
The hydraulic system exclusive of reasonable matching, the summer temperature is normal excluding radiator.
Processing object:
Ring-die drilling for fodder,biomass pellet,bits of wood and straw.
Parameter Description
MLT-WZ850W/850F/850DF MLT-WZ1050F/1050DF
Before and after the trip 400mm 430mm
Axis Z travel range 300mm 320mm
Scope of drilling 0.8-13mm 0.8-8mm
The minimum ring die inner size 350mm 500mm
The maximum ring die outer size 850m 1050mm
Positioning accuracy 0.02mm 0.02mm
Spindle speed 0-5000RPM 0-2800RPM
Spindle power 1.5kw/2.2kw 1.5kw/2.2kw
The control interface English/Chinese English/Chinese
Floor space(L*W*H) 1620x1200x2100mm 1720x1300x2300mm
Host weight ~ 900kg ~1050kg
Taper button bit is used for hard or very hard rock formation. Excellent quality and durability and specialized heat treat & stress reliefï¿¡?also maximum performance and hole cleaning ability. Our button bits made with high quality of raw material through special heat treatment, especially, tungsten carbide tips are import from south africa, widely applied in hand held (short-hole) drilling system for dimensional stone quarrying. Now, we are exporting the huge qty 32mm, 34mm, 40mm for indian quarry and spain, finland quarry, 7??, 11??38mm, 41mm is very popular for granite and marble etc quarries.. Diameter of bits from 30mm to 42mm with 4, 6, 7, 11, 12 degree, number of buttons is 4, 5, 6, 7, 8 , 9, 7 buttons is very popular for hand held (short holes ) and blast drilling system. Ton designs. Package: in wooden case or in carton.
Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy. According to different drilling application, we have different design to meet customers with good quality and good price. No matter what kinds of rock-soft rock, loose-medium rock, hard rock and any other special formations, just tell us what you need and leave others at our disposal, we will handle the following, and our special tailored service is waiting for you upon your demand. R32-45mm, r32-51, r32-64, r32-76, T38-64mm, t38-76mm, t38-89, t38-102mm, T45-76mm, t45-89mm, t45-102mm, T51-89mm, t51-102mm, t51-127 etc. (3)package: in wooden case or in carton or as client's requirement. (4)productivity: 10000pcs/ month Package: in wooden case or in carton or as client's
Single Color DIP
5mm Bullet With edge
Y.LIN Is a professional supplier of full color RGB DIP, 10mm round with edge and 8mm round with edge, etc. Please tell us what you required and ask any questions on any of our products.
Y.LIN can supply top view PLCC SMD, side view chip SMD and top view chip LED, etc. We are a leading enterprise in China, is a high-tech company, which manufactures LED products.
IR LED Emmiter, IR LED Receiver, Digit Tube Display, Infrared interrupter, Digit Display LED Dot Matrix, Single Color DIP Supplier.
We are leading manufacturer and supplier of Different types of drill vice at all over india. It made from casting body (C.I.) AND steel grade casting body (S.G.).
Dimension range(OD inch) 4-1/2â?�~20â?� (114.3mm-508mm)
Wall Thickness As per API 5CT standard (the latest edition)
Length R1,R2,R3
Steel Grade H40, J55, K55,C75,N80, L80,C90,T95, P110 ,Q125
Pipe Type Seamless (SMLS),Electric Resistance Welded (ERW)
Threads or Connection BTC, STC, LTC, Left hand connection or other premium thread like :VAM
Surface Treatment Anti-corrosion Water Based Paint
TPI SGS, BV, MOODY, CCIC can be arranged before shipment.
Packing Protection caps on both ends and in bundles with steel strips and two tags as per export requirements
Application Used as the architectural retainer for the walls of oil, gas wells
Dimension range(OD inch) 4-1/2~20 (114.3mm-508mm)
Wall Thickness As per API 5CT standard (the latest edition)
Length R1,R2,R3
Steel Grade H40, J55, K55,C75,N80, L80,C90,T95, P110 ,Q125
Pipe Type Seamless (SMLS),Electric Resistance Welded (ERW)
Threads or Connection BTC, STC, LTC, Left hand connection or other premium thread like :VAM
Surface Treatment Anti-corrosion Water Based Paint
TPI SGS, BV, MOODY, CCIC can be arranged before shipment.
Packing Protection caps on both ends and in bundles with steel strips and two tags as per export requirements
Application Used as the architectural retainer for the walls of oil, gas wells
Dimension range(OD inch) 4-1/2â?�~20â?� (114.3mm-508mm)
Wall Thickness As per API 5CT standard (the latest edition)
Length R1,R2,R3
Steel Grade H40, J55, K55,C75,N80, L80,C90,T95, P110 ,Q125
Pipe Type Seamless (SMLS),Electric Resistance Welded (ERW)
Threads or Connection BTC, STC, LTC, Left hand connection or other premium thread like :VAM
Surface Treatment Anti-corrosion Water Based Paint
TPI SGS, BV, MOODY, CCIC can be arranged before shipment.
Packing Protection caps on both ends and in bundles with steel strips and two tags as per export requirements
Application Used as the architectural retainer for the walls of oil, gas wells
5731 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
