1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ø47 Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
The fully hydraulic steel strand wire core drilling rig is suitable for the chamber with complete roof, no broken, no quicksand and no support. ·Horizontal drilling: the chamber requires the height is 2000mm and the width is 2000mm. ·Horizontal lateral drilling: the chamber requires the height 2000mm and the width is 4000mm. ·Vertical upper and lower angle drilling: the chamber requires the height is 4000mm and the width is 2000mm.
1. Applications of XY-200 hydraulic water well drilling rig Wells, geological survey, geophysical exploration, road and high-rise building foundation exploration, blasting holes and other drilling projects. 1.Parameters of XY-200 hydraulic water well drilling rig Maximum opening diameter 400mm Maximum borehole depth 200m Diameter of the end hole 75mm Borehole dip angle 90-75° Machine overall size 2.75*0.95*1.60m Drill pipe diameter 50mm Weight of drill rig diameter of drill pipe (without power) 760kg A vertical scroll of painting Shaft rotation speed 71/142/310/20r/min Vertical axis stroke 450mm Windlass Maximum lifting weight of single rope 2008kb Drum lifting speed 17/35/75/160 rm/s Wire rope diameter: 13mm Wire rope capacity 35mm Width of sluice 70mm Mud pump Type: horizontal single cylinder double action flowï¼?180L/min Maximum pressure 1.5mpa Working pressure 0.7mpa Inlet size 50mm Outlet pipe diameter 45mm Power Diesel oil 22hp Rated speed 2200r/min Electric machinery 15kw Rated speed 1460r/min
1. Characteristics of XYX-3 wheeled hydraulic water well drilling rig ·The drilling rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig. ·Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable. ·With oil pressure feeding mechanism to improve drilling efficiency ·The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole. ·The lifting and falling tower is hydraulic operation, which is convenient and reliable. ·The diesel engine uses electric start to reduce the labor intensity of the worker. 2. Parameters of XYX-3 wheeled hydraulic water well drilling rig Drilling hole depth 100/ 250 / 300/ 600 m Maximum opening diameter 300 / 200 /150 / 75mm Max open hole caliber 300mm Final hole diameter 75mm Drill pipe 60mm Borehole inclination 90°-65° A vertical scroll of painting Vertical rotation speed of vertical axis 30-1050r/min Vertical reversal speed 29-137r/min Vertical axis stroke 560mm Diameter of shaft inner hole 96mm Vertical axis lifting capacity 60kn Main hoist (hydraulic drive) Single rope lifting speed 0-45m/min Wire rope diameter 14mm Band width 90mm Drum diameter 300mm Reel capacity 30m Maximum lifting capacity of single rope 40kn Auxiliary hoist (hydraulic drive) Drum diameter 140mm Diameter of steel wire 6mm Reel capacity 450m Mud pump Mud pump BW-250 Horizontal three cylinder Flow 250 l/min Working pressure 7mpa Inlet diameter 75mm Outlet diameter 50mm Gear oil pump Double oil pump CBF-F63/25 Front-end flow pressure 63 l/min 20mpa Backend flow pressure 25 l/min 20mpa Rig power Diesel engine FAW Xichai 4 cylinder Electric machinery Y180L-4 22KW Wheeled chassis Bearing capacity of wheel chassis 3.5t Wheel chassis length 2.6m Wheel chassis width 2m Wheel chassis height 0.6m
1. Characteristics of XYD-3 crawler hydraulic water well drilling rig XYD-3 crawler water well drilling rig is mainly used for geological general investigation and exploration,road and tall building foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,ect. ·The drilling rig is equipped with crawler chassis device, which is easy to move with fast speed. ·The crawler device is made of resistant steel mill. ·Hydraulic oil pressure feed device, which improves drilling efficiency. ·Pressure gauge displays the condition of the bottom of the drill hole. ·Drill mast controlled by hydraulic cyliner so it improves the efficiency. ·Diesel engine adopts the electric starter to reduce the labor usage. 2. Parameters of XYD-3 crawler hydraulic water well drilling rig Drilling depth 600m Max. open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90°-75° Spindle Spindle forward speed 30-1050r/min Spindle reverse speed 29-137r/min Spindle stroke 600mm Spindle inner diameter 96mm Main Winch Single line lifting speed 0.5/0.9/1.4/1.9m/s Diameter of wire rope 12.5mm Brake width 90mm Drum diameter 300mm The biggest single rope hoisting capacity 30kn Mud pump Type Horizontal triples BW-250 Mud Pump Displacement 250 l/min Water inlet diameter 75mm Water outlet diameter 50mm Power Diesel engine 38kw Electric motor Y180L4 22KW Weight 6500kg Size 2500*900*1800mm
1.Main features of XYC-3 vehicle-mounted hydraulic water well drilling rig XYC-3 is a multi-functional hydraulic vehicle-mounted water well drilling rig.The drilling rig transmission system and hoist, mud pump and other important accessories are all installed on the chassis. The layout is reasonable and compact. And the operation is simple. The drilling rig is equipped with high pressure and large flowBW-250 pump, which ensures the drilling depth and borehole diameter. 2. Applications of XYC-3 vehicle-mounted hydraulic water well drilling rig ·geological survey and exploration ·road and high-rise building foundation exploration ·all kinds of concrete structure inspection holes ·river embankments ·subgrade grouting holes ·drilling and direct grouting ·civil use water wells ·ground temperature central air conditioners 3. Parameters of XYC-3 vehicle-mounted hydraulic water well drilling rig XYC-3 vehicle-mounted hydraulic water well drilling rig Drill depth 30-600 Drill hole diameter 300-75 Diameter of the end hole 75 Drill angle 90-75 Spindle forward core speed 30-1050 Spindle reverse core speed 29-137 Spindle stroke 600 Main winch lifting force (with single line) 3000 Main winch rope capacity 65 Lifting speed 0.3-1.9 Rope diameter 12.5 Drill mast height 7000 Drill effective height 6500 Driving drilling rod 59*53ã??70*63ã??79*89 Drilling rod diameter 42/50/60 Weight 3500 Engine Model:Yunnei YN27 BW-250 mud pump Rated flow (l/min) 250 Rated power(mpa) 7 Driving power(kw) 15 Host weight(kg) 500 Dimension(mm) 1110*994*665 Chassis Vehicleï¼?Pictures of vehicle-mounted drilling rigs for reference onlyï¼?
1. Characteristics of XY-44A hydraulic water well drilling rig XY-44A is a water well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster water well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XY-44A hydraulic water well drilling rig ·water well drilling, ·engineering geology exploration, ·hydrology and water well drilling ·large diameter foundation piles construction 3.Parameters of XY-44A hydraulic water well drilling rig XY-44A hydraulic water well drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-1 81KW Electric motor Y225S-4 37KW
1. Characteristics of XYX-44A wheeled hydraulic water well drilling rig XY-44A is wheeled water well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster water well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XYX-44A wheeled hydraulic water well drilling rig ·Water well drilling, ·engineering geology exploration, ·hydrology and water well drilling ·large diameter foundation piles construction 3.Parameters of XYX-44A wheeled hydraulic water well drilling rig XYX-44A wheeled hydraulic water well drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-181KW Electric motor Y225S-4 37KW
1.Applications of HZ-130Y hydraulic water well drilling rig ·civil water well ·geological survey and exploration ·basic exploration for roads ·high-rise buildings ·inspection holes for various concrete structures ·river embankments ·grouting holes ·direct grouting, ·ground temperature central air conditioners. 2.Features of HZ-130Y hydraulic water well drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 3.Specifications of HZ-130Y hydraulic water well drilling rig HZ-130Y hydraulic water well drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90-75° Drill weight (Not include power) 750kg Spindle Spindle speed 142ã??285ã??570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm
1.Brief introductions of QZ-1A two phase electric sampling drilling rig QZ-1A is a two phase electric sampling drilling rig produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for all kinds of geological exploration, like industrial and civil buildings, bridges, railways, roads and so on. QZ-1A two phase electric sampling drilling rig is only 80kg; height is less than 2 meters, and the drilling rig can been break down structure. Hence it is easy to move and operated. 2.Technical parameter s of QZ-1A two phase electric sampling drilling rig QZ-1A two phase electric sampling drilling rig Borehole diameter (mm) 32-46 Drilling depth (m) Soil layer: 20-25 Lithosphere: 15-20 Drilling pipe diameter (mm) 25 Rotate speedï¼?r/minï¼? 175 Torque (n.m) 80 Power (kw) 3 Dimensions (l*w*h) 600mm*450mm*1900mm Weight (kg) 80 3.Configuration list of QZ-1A two phase electric sampling drilling rig Item Parameters Unit Quantity Two phase electric sampling drilling rig QZ-1A set 1 Drill pipe(mm) 25*1500 pc 6 Drill pipe(mm) 25*800 pc 8 Joint(mm) 32 pc 14 Core barrel(mm) 32*800 pc 1 Alloy bit(mm) 32 pc 1 Reducing nipple(mm) 45/32 pc 1 Core barrel(mm) 45*800 pc 1 Alloy bit(mm) 46 pc 1 Three-wing bit(mm) 60 pc 1 Safety clamp pc 1 Water seal Y Type 30*45*8 pc 4 Control wheel set 1
- Model: MR2405 - Voltage&frequency 110/120/230V, 50/60Hz. - Rated input power: 750 W - Impact energy: 2.5 J - Impact Rating 0-1700/0-3000bpm - Drill Holder SDS plus - Working Capacity metal: 13 mm; concrete: 18 mm; wood: 30 mm - Power cord: 2 meter length rubber cord
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-600 water well drilling rig SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers. The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-600 water well drilling rig Drilling depth 600m Borehole diameter 500mm-2500mm Rotary table latus rectum 605mm Active drillingpipe 108*108*12mm Drilling pipe 89mm Rotary speed 42/75/134kn.m Main windlass single rope lifting power 35kn hook rated load 210kn hook lifting speed 0.15-0.47m/s pulley block model 3*3 wire-rope diameter 20-21.5mm Assistant windlass single rope rated lifting power 15kn maximum lifting power of a single rope 20kn single rope rated lifting speed 0.58m/s wire-rope diameter 9.8mm Windlass power 37kw Gross weight (excluding drillingpipe) 11t
1.The applications of KQZ-180D pneumatic water well drilling rig KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use. 2.The specifications of KQZ-180D pneumatic water well drilling rig Drilling hole diameter 100-219mm Drilling depth 150m Drilling angle ground to 45-90° Feed stroke 1500mm Motor power 7.5kw Rotary speed 0-78rpm Wind pressure 0.8-2.1mpa Air consumption 13-21L/min Gross weight 600kg
Shin Shank
1.Features of KY-150 hydraulic exploration drilling rig for metal mine KY-150 hydraulic exploration drilling rig for metal mine is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds. KY-150 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling. KY-150 hydraulic exploration drilling rig for metal mine uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling. 2.Components of KY-150 hydraulic exploration drilling rig for metal mine The KY-150 hydraulic exploration drilling rig for metal mine adopts the structure of full hydraulic power head, and consists of three parts: main engine, pump station and operating floor. 3.Specifications of KY-150 hydraulic exploration drilling rig for metal mine Borehole diameter 36.5mm/46.5mm Drilling depth 150ï¼?Ï?33 steel drill pipeï¼?/120ï¼?Ï?43 steel drill pipeï¼?/150(Ï?43 aluminum alloy drill pipe) Borehole angle 0°-360° Spindle speed 400-1400 r/min Spindle output torque 87-300 n.m Rated pull force 30 kn Rated pull speed > 0.3 m/s Oil supply mode double gear pump Hydraulic oil mode antiwear hydraulic oil YB-N46/YB-N32 (winter) Motor model manual variable motor A6V55MA Motor specifications Y180M-4/18.5 kw Equipment weight main engine166kg/backbone 40kg/operation floor 86kg/power car 210kg
1.The brief introductions of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area. 2.The specifications of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig Borehole diameter mm 100-254 Borehole depth m 200 Drilling angle ° 45-90 One-time feed stroke mm 1500 Motor power kw 11 Diesel engine power hp 8.5
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ø47 Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
1.Brief introductions of KHYD75 electric rock drilling rig ·electric rock drilling rig can be fitted with drilling stand, and can be drilled horizontally or inclined upward. ·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining. ·In drilling operations, we only need to operate the handwheel, and the electric motor rock drilling rig can advance and return quickly. 2.Specifications of KHYD75 electric rock drilling rig Model Unit KHYD75 Rated output power of electric motor kw 3 Rated voltage of electric motor v 380/660 Rated frequency of electric motor hz 50 Rated current of electric motor a 6.8/3.9 Motor rotating speed r/min 1420 Working mode continuity Drilling speed mm/min 320 Rig return speed m/min Borehole diameter mm 42(rockï¼? Hardness range protodikonov`s scale of hardness f
1.The applications of KQZ-180D pneumatic water well drilling rig KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use. 2.The specifications of KQZ-180D pneumatic water well drilling rig Drilling hole diameter 100-219mm Drilling depth 150m Drilling angle ground to 45-90° Feed stroke 1500mm Motor power 7.5kw Rotary speed 0-78rpm Wind pressure 0.8-2.1mpa Air consumption 13-21L/min Gross weight 600kg
