Description: Die collar is a special external fishing tool which is engaged on the outside wall of tubing objects such as oil tubing and drill pipe. It can be used in fishing cylindrical objects without inner bore or stucked inner bore.
Precise hydraulic control allows fast, efficient and safe pulling. High quality, forged steel components provide superior reliability and service. Full set includes: Hollow cylinder, hand pump, hydraulic hose, pressure gauge and gauge adaptor.
Chuck Size: 3/8" (10 mm) Free Speed: 2,300 rpm Full cage gear Weight: 2.86 lb (1.3 kg) Length: 7-1/2" (190 mm) GSA6104KL 3/8" Heavy Duty Reversible Drill w/Keyless chuck
Chuck Size: 1/2" (13 mm) Free Speed: 500 rpm Planetary gear Horse Power: 0.5 hp (0.372 kw) Spindle thread: 3/8"-24 Weight: 4 lb (1.82 kg) Length: 9-1/16" (230 mm) GSA6113KL 1/2" Drill w/Keyless Chuck
We supply drilling spools that are in line with API specification 6A. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom and side end connections can be hub end or flanged.
good quality and price. Specification:1" 1-1/8" 1-1/4" 1-1/2"
Description: The IBOP is a non-return valve (check valve), also called Gray Valve or BVR, is a back pressure valve used in the drill string to prevent the well from flowing uncontrollably up the drill string. It is used to hold the tool open therefore it is possible to stab the valve while the fluid is flowing through the drill pipe. With the IBOP valve installed in the drill string, it allows you to strip in hole without mud flowing through the drill sting. The IBOP valve should not be used for shut the well in while tripping.
Description: Accumulator unit for BOP stacks is a very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. It consists of remote control system, drillers panel, air cable (except electrical type), pipe rack (electrical warming system available for cold area), high pressure manifold, protection room, etc. Accumulator unit is designed, manufactured and inspected in accordance with API Spec. 16D and it can be divided into two types: Electrical type FKDQ series and Pneumatic type FKQ series.
TAPS CAS 29915-38-6 3-[Tris(Hydroxymethyl)Methylamino]-1-Propanesulfonic Acid Name3-[Tris(hydroxymethyl)methylamino]-1-propanesulfonic acid AbbreviationTAPS CAS#29915-38-6 Molecular weight243.28 Molecular formulaC7H17NO6S Storage ConditionsRoom temperature, light-proof and moisture-proof Use As a buffer system commonly used in DNA screening system, it can also be used as a buffer component of RNA samples. It is suitable for the study of electron transfer and phosphorylation of thin-layer chloroplast preparation. It can protect oxyhemoglobin from oxidizing to methemoglobin during freeze-drying process, and can also be used as a background electrolyte for protein microanalysis by capillary zone electrophoresis. AdvantageThe purity (> 99%) is water-soluble, the process is stable, and the appearance of the product can be guaranteed to be pure white crystal powder. DeSheng is an old blood testing reagent company with 14 years of research and development experience. It has a deep research on chromogenic substrates and biological buffers. Tag: anticoagulant citrate dextrose solution, n cyclohexyl 3 aminopropanesulfonic acid
Description: Ram type BOPs are field proven products that are designed for a variety of operations from workovers to high pressure, critical service operations for land drilling and subsea service. It consists of the BOP body, bonnet, hydraulic cylinder assembly, operating piston, ram change cylinder, ram opening/closing piston, locking screw, ram assembly, sealing parts etc. Top, bottom and outlet connection dimensions conform to Specification for Drilling through Equipment API Spec 16A. Made up of the high-strength and high-tenacity alloy steel, the pressure-bearing parts (like BOP body, bonnet etc.) are formed through external refining and proper heat treatment, preventing the harmful chemical components and nonmetallic inclusion strictly from materials and ensuring BOP to be safe and reliable. The body ram chamber adopts the long runway to reduce stress concentration. Both the bonnet switch and ram switch are driven by the hydraulic pressure and adopts the same one oil line. The bonnet employs the same one oil line and operation to open and close the ram. Moreover, the bonnet employs the same one oil line and operation to close and open the ram.
Description: BOP part name: Packing element, shear ram, pipe ram, blind ram, variable bore ram, top sealing, front sealing, bonnet, piston, shell.
Description: Annular blowout preventer consists of body, upper housing, sealing element, dust-proof ring, and piston. It provides a rugged, reliable preventer and ease of service and widely used Offshore (subsea and surface) and onshore. Annular blowout preventer is compact, seal any size kellys, drill pipe, tool joints, drill collars, casing or wireline. Sphericals also provide positive pressure control for stripping drill pipe into and out of the hole. Annular blowout preventer is Manufactured in accordance with API Specification 16A, and NACE MR0175 per API Specification 16A, Temperature T20, Standard nitrile packing element: 40°F to 170°F.
Description: Sucker rod guide is a downhole tool for preventing eccentric wear of pumping Wells, which is suitable for pumping Wells with eccentric wear, especially for pumping Wells with eccentric wear above the neutral point of sucker rod and directional inclined Wells, and for those with eccentric wear below the neutral point of sucker rod and the nylon centralizer on the sucker rod body for better effect of eccentric wear prevention. Sucker rod centralizer has strong flexibility, it is in contact with the inner wall of the oil pipe, can reduce the friction between the rod and the pipe, enhance the oil extraction life of the pumping unit.
Description: Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.
Description: TDS (top drive drilling system) The Top Drive Drilling System is a significant development trend of modern drilling rig technology advantageous in time saving, efficiency increase of drilling rig operation, disposal of down-hole complexity and increase of mechanization and safety, which has gradually become one of the standard drilling rig configurations. It can rotate the drill pipe in the above of the Derrick directly, extend the special track down and up, than complete rotary and drilling, Circulating the drilling fluid, connection the drilling stem, make-up and break-out the pipe, back reaming etc drilling operation
Description: The desander with underflow shaker is also called Mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size mud cleaner, the Mini Desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and mining project, Mini desander is an Ideal choice.
Description: The desilter with underflow shaker is also called Mini cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size desander and desilter assembly, the Mini Desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and mining project, Mini desilter cleaner is an Ideal choice. Liuda Li
Drill pipe wiper is an ideal small to clean the mud on the drill pipe in the process of while drilling, with simple structure it is easy to operate. It is used for drill pipe from 2-3/8to 6-5/8.
Description: Thread protectors are used frequently in the oil and gas industry to protect pipe threads during transportation to the oil and gas fields. Thread protectors are generally manufactured from plastic or steel.
Features of Jet Mud Mixer : 1. Mud Mixer is a single jet mixer combined with 45 KW ( or 55 KW ) sand pump and a jet mud hopper or a double jet mixer of two pumps and two hoppers. 2. The weighting hopper can be combined with a pump or be used independently with pump connected together by manifold valve. 3. Put the drilling fluids materials ( bentonites, barite powder ) and the corresponding chemical additives ( polymer ) into circulation tank for increasing the total. Jet Mud Mixer is the equipment match with drilling solids control equipments, uausally used to configrate and increase the proportion of drilling fluid, change density, viscosity, water lose etc. It has a more excellent effect if matched with shear pump, and also can be designed to double jet mud mixer as requirements. 1. It is safe and stable and can be moved conveniently. 2. The unit includes one sand pump, one jet mixing hopper 3. The effect is more prominent matching with Shear Pump. 4. It is designed for solids control bentonite mud mixer,drilling mud tank jet mixer. 5. It can be made Twin Jet Mud Mixers according to the user requirements . Attn: Melody Wang Mobile: 0086-18307551623 (wechat/whatsapp) Email: melody(at)lakepetro.com API Solid control oil well drilling tool Jet Mud Mixer and spare parts/CONTROL DRILLING SOLIDS
