Drill subs are an important integral part of everyday drilling. Not having the right thread adapter can make your life miserable. We have a large inventory of common and not so common sizes. Custom sizes are always available. Rotary subs have two primary applications. They can be used to cross over from one connection size to another, or as the disposable component used to extend the connection life of a more expensive drill stem member. Installing a float sub (with check valve) is always a good idea when drilling in wet situations.
Description: The IBOP is a non-return valve (check valve), also called Gray Valve or BVR, is a back pressure valve used in the drill string to prevent the well from flowing uncontrollably up the drill string. It is used to hold the tool open therefore it is possible to stab the valve while the fluid is flowing through the drill pipe. With the IBOP valve installed in the drill string, it allows you to strip in hole without mud flowing through the drill sting. The IBOP valve should not be used for shut the well in while tripping.
Description: We supply drilling spools that are in line with API specification 6A. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom and side end connections can be hub end or flanged.
Description: Overshot is a downhole tool used in fishing operations to engage on the outside surface of a tube or tool. A grapple, or similar slip mechanism, on the overshot grips the fish, allowing application of tensile force and jarring action. If the fish cannot be removed, a release system within the Overshot allows the overshot to be disengaged and retrieved.
Description: A rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the drill string to facilitate the process of drilling a borehole.
Description: Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.
Downhole motor is a kind of downhole power frilling tools by mud. The mud output by the mud pump, will enter the motor through the bypass valve, and a certain pressure difference will be formed at the inlet and outlet of motor, to push the rotor of motor to rotate, and to transfer the torque and the RPM to the drill bit via the universal shaft and the driving shaft. Drilling downhole motors offer a wide range of configurations to meet different needs. These motors have the power, torque, and speed to drill with the PDC bits for specific downhole conditions or well designs. Using the latest available technology and materials, the motors can be used in an extensive range of drilling applications, such as: Vertical, directional, and horizontal wells High temperature Synthetic-, oil-, and water-based mud systems Performance drilling Extended-reach well
Description: A drill bit is a device attached to the end of the drill string that breaks apart, cuts or crushes the rock formations when drilling a wellbore, such as those drilled to extract water, gas, or oil. The drill bit is hollow and has jets to allow for the expulsion of the drilling fluid, or mud, at high velocity and high pressure to help clean
Drill subs are an important integral part of everyday drilling. Not having the right thread adapter can make your life miserable. We have a large inventory of common and not so common sizes. Custom sizes are always available. Rotary subs have two primary applications. They can be used to cross over from one connection size to another, or as the disposable component used to extend the connection life of a more expensive drill stem member. Installing a float sub (with check valve) is always a good idea when drilling in wet situations.
Description: Lake Petro provide the mud pump accord with API specifications, as per international standard and requirements. Our product offering is extensive used in drilling and fracturing for oil and water well, including: F series, P series, NB series, BW series and
Description: Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work to
This is the fully faired version of the Xtreme 200R. It is priced under a lakh ex-showroom in Delhi, and it makes no pretence of being an out and out sports bike.
The Xpulse was a concept when displayed at EICMA in November last year. This February, a pre-production version was on display at the 2018 Delhi Auto Expo. It has retained a lot of elements of the concept like the styling and 21/18 inch wheel rims front and rear, but what has changed is the paint scheme, for one. A lovely white finish is what Hero has gone for, and it has made it very fetching. The name is also clear now: it will be called Xpulse 200, because it shares its motor with the Xtreme 200. Expect the same 18bhp/17Nm output from the Xpulse, but there is one big difference: fuel injection will be present on the latter. Along with the long-travel suspension and LED headlamp, the all-digital instrument cluster can be connected to the phone via Bluetooth and can also display simplified turn-by-turn navigation. The Xpulse has no real competition in the Indian market, and should launch in time for the festive season.
Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Step drill attachment can be interchanged without tools. U.S.A. Key Specs Item# 3316250 Brand Darex Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 8.6 lbs Accessory Type Step drill attachment More Information Please Visit our website OFFICIAL STORE ECMETOOLS for catalog, transaction, full Description, Term and Conditions, best product, or special price.
PTP Working Center Machine Main Parts: 1. Vacuum dual-zone & double-position design with vacuum suction cups, can achieve fast positioning for diversified customized production. 2. The machine body structure is made of thick-walled welded square steel tube, and with tempering treatment at 5 sides, which ensure the body durable and never deformation. 3. German imported HOMAG-Schmalz countertop can move freely, which is convenient for the processing of different size workpiece. Pneumatic clamps enable the machine to process special shaped or irregular parts too. 4. Taiwan made guide rail and ball screw, high precision, long service lift, good stability. 5. Taiwan planetary reducer, with small volume, large torque, high transmission efficiency and wide range of speed reduction. 6. Centralized automatic lubrication system, can supply oil to the guide rail and ball screw at regular time and rationing, ensuring their service life. 7. Workpiece positioning cylinder guarantee more accurate positioning of each workpiece. 8. Italy HSD numerical control drilling head can finish all drilling on 5 sides of the workpiece upon one time positioning. 9. Carousel automatic tool change system, with 8pcs capacity of tools magazine, need only 8 seconds to change tools freely. 10. Vacuum table can adsorb the entire panel or point-to-point. The entire panel can be processed directly without sawing in advance. Convenient loading and unloading, shorten the auxiliary time greatly. Performance Features: 1. Be suitable for processing diversified complicated products, with wide rage of functions, including routing, drilling, cutting, side milling, sawing, etc.. 2. Break the traditional processing mode, really save time and effort. Make the production get rid of artificial dependence, significantly shorten the production process and processing time. 3. Can be interfaced with panel production line software, is one essential equipment for the customized panel furniture production line. Applicable: 1. Furniture Industry: panel furniture, office furniture, wooden doors, cabinets. 2. Wood Products: stereo box, game cabinets, computer desks, sewing machines, musical instruments. 3. Panel Processing: insulation materials, plastic parts, chemical parts, PCB, inner body of motor car, bowling track, stairs, anti-Bethe plates, epoxy resin, ABS, PP, PE, etc. carbon mixed compound. 4. Decoration Industry: acrylic, PVC, MDF(density board), artificial stone, organic glass, and other soft-metal sheets made of aluminum or copper.
Lake Petroleum could supply a huge quantity of new drill pipe for sale, available in all standard sizes and weights, to quickly meet the drilling equipment needs of companies in the oil, gas and Geothermal industry.
Downhole motor is a kind of downhole power frilling tools by mud. The mud output by the mud pump, will enter the motor through the bypass valve, and a certain pressure difference will be formed at the inlet and outlet of motor, to push the rotor of motor to rotate, and to transfer the torque and the RPM to the drill bit via the universal shaft and the driving shaft.
Kellys are manufactured with one of two drive configurations, square or hexagonal. Square kellys are furnished as forged or machined in the drive section. Hexagonal or fully machined square kellys are machined from full length quenched and tempered round bars.
Description: A drill bit is a device attached to the end of the drill string that breaks apart, cuts or crushes the rock formations when drilling a wellbore, such as those drilled to extract water, gas, or oil.
Description: Horizontal Hole openers, also known as HDD reamer, are used to enlarge the diameter of a pre-drilled hole. They are custom built to specification, and come in a wide variety of sizes. HDD is used when trenching and excavating is not practical. This drilling technology allows for a steerable trenchless way to drill underground. There are three stages, the first stage is to drill a small diameter pilot hole. The second stage is enlarge the hole with a larger diameter cutting tool called an HDD Reamer, Rock Reamer or Hole Opener. The third stage is inserting the casing pipe or other product into the enlarged hole.
