Shin Shank
1.Features of KY-150 hydraulic exploration drilling rig for metal mine KY-150 hydraulic exploration drilling rig for metal mine is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds. KY-150 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling. KY-150 hydraulic exploration drilling rig for metal mine uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling. 2.Components of KY-150 hydraulic exploration drilling rig for metal mine The KY-150 hydraulic exploration drilling rig for metal mine adopts the structure of full hydraulic power head, and consists of three parts: main engine, pump station and operating floor. 3.Specifications of KY-150 hydraulic exploration drilling rig for metal mine Borehole diameter 36.5mm/46.5mm Drilling depth 150ï¼?Ï?33 steel drill pipeï¼?/120ï¼?Ï?43 steel drill pipeï¼?/150(Ï?43 aluminum alloy drill pipe) Borehole angle 0°-360° Spindle speed 400-1400 r/min Spindle output torque 87-300 n.m Rated pull force 30 kn Rated pull speed > 0.3 m/s Oil supply mode double gear pump Hydraulic oil mode antiwear hydraulic oil YB-N46/YB-N32 (winter) Motor model manual variable motor A6V55MA Motor specifications Y180M-4/18.5 kw Equipment weight main engine166kg/backbone 40kg/operation floor 86kg/power car 210kg
1.The brief introductions of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area. 2.The specifications of KQZ-200D pneumatic water well drilling rig KQZ-200D pneumatic water well drilling rig Borehole diameter mm 100-254 Borehole depth m 200 Drilling angle ° 45-90 One-time feed stroke mm 1500 Motor power kw 11 Diesel engine power hp 8.5
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ø47 Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
1.Brief introductions of KHYD75 electric rock drilling rig ·electric rock drilling rig can be fitted with drilling stand, and can be drilled horizontally or inclined upward. ·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining. ·In drilling operations, we only need to operate the handwheel, and the electric motor rock drilling rig can advance and return quickly. 2.Specifications of KHYD75 electric rock drilling rig Model Unit KHYD75 Rated output power of electric motor kw 3 Rated voltage of electric motor v 380/660 Rated frequency of electric motor hz 50 Rated current of electric motor a 6.8/3.9 Motor rotating speed r/min 1420 Working mode continuity Drilling speed mm/min 320 Rig return speed m/min Borehole diameter mm 42(rockï¼? Hardness range protodikonov`s scale of hardness f
1.The applications of KQZ-180D pneumatic water well drilling rig KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use. 2.The specifications of KQZ-180D pneumatic water well drilling rig Drilling hole diameter 100-219mm Drilling depth 150m Drilling angle ground to 45-90° Feed stroke 1500mm Motor power 7.5kw Rotary speed 0-78rpm Wind pressure 0.8-2.1mpa Air consumption 13-21L/min Gross weight 600kg
1.Brief introductions of KY-250 hydraulic exploration drilling rig for metal mine The KY250 hydraulic explortation drilling rig for metal mine is ·small in size ·light weight ·convenient to install and operate ·excellent linkage and adjustable speed range ·suitable for drilling at any angle in the tunnel or surface. 2.Specifications of KY-250 hydraulic exploration drilling rig for metal mine Drilling diameter Φ36.5mm /Φ46.5mm Drilling depth 250mï¼?ø33 Steel drill pipeï¼?/200mï¼?ø43 Steel drill pipeï¼? Borehole angle 0°-360° Spindle speed 400-1400r/min Spindle output torque 150-400nm Rated pulling force 40kn Rated pulling speed ï¼?0.3m/s Oil supply mode double gear pump Rated system pressure 16mpa Oil pump model CBF-F71/10 Hydraulic oil model antiwear hydraulic oil YB-N46/YB-N32 (winter) Motor model manual variable motor A6V80MA Motor specification 30kw Weight main engine 275kg/backbone 40kg/operating floor86kg/power car 420kg
1.Applications of KY-6075 steel strand wire exploration drilling rig for metal mine The fully hydraulic steel strand wire core drilling rig is suitable for the chamber with complete roof, no broken, no quicksand and no support. ·Horizontal drilling: the chamber requires the height is 2000mm and the width is 2000mm. ·Horizontal lateral drilling: the chamber requires the height 2000mm and the width is 4000mm. ·Vertical upper and lower angle drilling: the chamber requires the height is 4000mm and the width is 2000mm. 2.Features of KY-6075 steel strand wire exploration drilling rig for metal mine ·It is small in size, light in weight and easy to install. The steel strand wire coring can work in all direction and core without pulling out drill pipe. ·Three parts: the main engine, the pump station, the operating floor. ·It can work in the original transportation and prospecting tunnel, and play a protective role in the overall structure of the mine. It can also be used for 0-90 degree surface drilling. ·The drilling rig is arranged with great flexibility, mechanically screwing and unscrewing drill pipe, so it will reduce labour costs and improve work efficiency. ·With the box feeding frame, gripper tightening, power head rotary drilling, oil cylinder delivery tool, you can get rid of the heavy drilling tower.. ·It has the function of linkage, centralized control through operating floor, simple and safe, and no speed regulation. ·Hollow shaft design, drill pipe length is not restricted by drilling rig feed stroke. ·It is easy to disassemble, and the relocation is convenient. Three kinds of drilling pipe, Φ49-Φ60-Φ75, can be used on the same machine. It takes only 15 minutes to replace it. ·Compact operating table; oil pump, water pump, power supply centralized . ·The drawing column is suitable for the high and low lanes. ·The imported oil meter line is subjected to high pressure and its softness will reduce the pressure pulse of high pressure oil, so that it can make the pointer of hydraulic oil table more stable, and can detect the formation and rock changes in time. ·The special custom oil temperature cooler, high pressure oil cooling soon and low temperature application can protect the service life of motor, oil pump and rubber seal.
1. Introduction of YN27A internal combustion rock drill The YN27A internal combustion rock drill is widely used in an internal combustion type rock drill for mining, road construction, quarrying, national defense engineering, etc. The rock drill is easy to operate. The rock drill is suitable for areas with no power supply and no wind pressure equipment and temporary engineering with large fluidity. Especially suitable 2.Features of YN27A internal combustion rock drill ·It is not necessary to replace the internal parts of the machine head, just move the handle as required to operate. ·The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency. ·The machine has reached the first-class level of similar products and can be completely interchanged with international similar products. ·Drill holes in the rock, which can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters. ·The weight of the main unit is only 27 kg, which is convenient to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large fluidity. ·This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°. 3.Parameters of YN27A internal combustion rock drill ·Host weight: 27kg ·Engine type: Single cylinder air-cooled two-stroke gasoline engine ·Carburetor type: No float ·Ignition method: Thyristor contactless system ·Engine capacity:185 cm³ ·Engine load speed:(Determined when chiseling five holesï¼?ï¼?â?¥2450 r/min ·Drill rod idle speedï¼?â?¥200r/min ·Shank size tailï¼?Hexagon 22|*108 mm ·Deepest hole penetration depthï¼?â?¥6 m ·Fuel tank capacityï¼?â?¥1.14 L ·Punching speedï¼?â?¥250mm/min ·Gasoline and lubricating oil mixing ratio:(By volumeï¼?ï¼?9:1 ·Spark plug electrode gap:0.5-0.7 mm ·Fuel consumption rate:(Determined when chiseling five holes):â?¤0.12L/M ·Impact energy:â?¥20J Shandong Master Machinery Group specializes in supplying internal combustion rock drill. The main models are YN27A, YN27P, YN27C.
1.Introduction of YN27C internal combustion rock drill The YN27C internal combustion rock drill has various functions such as mining, drilling, building construction, geological exploration, cement pavement, asphalt pavement and other functions such as splitting, crushing, compacting and shovel. It is widely used in mining, road construction, quarrying, construction, railway tamping, geological survey, national defense engineering, etc. 2.Features of YN27C internal combustion rock drill You only need to move the handle as required to complete the drilling or crushing operation. The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency. The machine has reached the first-class level of similar products and can be completely interchanged with international similar products. The drilling can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters. The weight of the main machine is only 27 kg. Only one person can operate it. It is easy to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large mobility. This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°. This machine adopts export packaging, and all the indicators meet the export standards. This product is exempt from inspection and does not require commodity inspection for export. Since only gasoline needs to be added to work, no other auxiliary equipment is needed. This machine is suitable for mining of various mines such as iron ore, copper mine, nickel mine, lead-zinc mine, gold mine, gemstone mine, granite, bluestone and jade. 3.Parameters of YN27C internal combustion rock drill Host weight: 27kg Engine type: single cylinder air-cooled two-stroke gasoline engine Carburetor type: no float Ignition method: thermistor contactless system Engine displacement: 185 cm³ Engine load speed (measured when chiseling five holes): â?¥2450r/min Drill rod idle speed: â?¥200r/min Shank size drill rod tail: hexagon 22*108mm Deepest hole drilling depth: â?¥6m Fuel tank volume: â?¥1.14L Punching speed: â?¥250mm/min Gasoline and lubricating oil mixing ratio (by volume): 12:1 Spark plug electrode gap: 0.5-0.7mm Fuel consumption rate (measured when chiseling five holes: â?¤0.12L/M Impact energy: â?¥25J Shandong Master Machinery Group specializes in supplying internal combustion rock drills. The main models are YN27A, YN27P and YN27C.
1.Brief introductions of KHYD140 electric rock drilling rig for coal mine KHYD140 electric rock drilling rig is a tool for rock blasting hole. ·electric rock drilling rig should be equipped with drilling stand, and can be horizontally forward or inclined upward to drill in any direction. ·In order to prolong the service life of drill bits and improve the working conditions of operators, water draining powder is called wet drilling. ·In the operation of drilling rig, we only need to operate the hand wheel, and the electric motor rock drilling rig can push itself forward and return quickly. 2.Specifications of KHYD140 electric rock drilling rig for coal mine Model KHYD140 Rated output power of electric motor kw 5.5 Rated voltage of electric motor v 380 Rated frequency of electric motor hz 50 Rated current of electric motor a 11.6 Motor rotating speed r/min 1440 Motor phase number three phase communication Rated working mode continuity Drilling speed mm/min 280 Maximum axial thrust n 12000 Borehole diameter mm 42-80ï¼?rockï¼? 80~100ï¼?coal seamï¼? Hardness range protodikonov`s scale of hardness f
1.Brief introductions of KHYD155 electric rock drilling rig for coal mine KHYD155 electric motor rock drilling rig is a tool for rock blasting hole. ·electric motor rock drilling rig should be equipped with drilling rigs, and can be drilled horizontally or inclined upward in any direction. ·In order to prolong the service life of drill bits and improve the working conditions of operators, water draining powder is called wet drilling. ·In the operation of drilling rig, we only need to operate the hand wheel, and the electric motor rock drilling rig can push itself forward and return quickly. 2.Specifications of KHYD155 electric rock drilling rig for coal mine Model KHYD155 Rated output power of motor (kw) 7.5 Rated voltage of motor (v) 380/660 Rated frequency of motor (hz) 50 Rated current of motor (a) 15.4 Motor rotating speed (r/min) 1440 Motor phase number three phase communication Rated working mode continuity
1.Introduction of Y10 Hand-held Pneumatic Rock Drill Y10 portable hand-held pneumatic rock drill is a novel light rock drilling machine for mining and construction in quarrying industry and construction industry. It has low gas consumption, low noise, fast speed, high efficiency, flexible operation and good economic effect. Y10 portable hand-held pneumatic rock drill can drill 20-24 mm holes on various rocks and buildings. Especially when performing secondary blasting on marble and granite, it will be your most handy tool. 2.Parameters of Y10 Hand-held Pneumatic Rock Drill Weight 10 kg Length 458 mm Air consumption ï¼?9 l/s Working pressure 0.4-0.63 mpa Air pipe inner diameter 13 mm Rock drilling speed 280 mm/min Bit diameter 20 mm Shandong Master Machinery Group specializes in supplying pneumatic rock drillï¼?the main models are: QCZ-1, QCZ-2, Y6, Y8, Y10, Y24, Y26, YO18, Y19A, Y20LY, 7665, 7655, YT23, YT24, YT27, YT28, YT29A ,YSP45 .
1.Introduction of Y20LY Hand-held Air Leg Rock Drill Y20LY hand-held air leg rock drill continuously impacts the shank and continuously inputs compressed air or pressurized water from the center hole of the drill to discharge the slag out of the hole, forming a circular drill hole of a certain depth. Y20LY hand-held air leg rock drill is mainly used for rock drilling in mine roadway excavation. It is most suitable for large mines and tunnel rock drilling operations. The diameter of the blasthole is 34-42 mm and the depth can reach about 5 meters. 2.Parameters of Y20LY Hand-held Air Leg Rock Drill Weight 20 kg Length 561 mm Cylinder diameter 63 mm Stroke 55 mm Working pressure 0.4-0.63 mpa Air consumption â?¤33 l/s Impact frequency â?¥33 hz Impact energy â?¥26 j Air pipe inner diameter 19 mm Water pipe inner diameter 8 mm Bit diameter 34-42 mm Rock drill hole depth 5 m Shank diameter 22*108 mm Shandong Master Machinery Group specializes in supplying pneumatic rock drillï¼?the main models are: QCZ-1, QCZ-2, Y6, Y8, Y10, Y24, Y26, YO18, Y19A, Y20LY, 7665, 7655, YT23, YT24, YT27, YT28, YT29A ,YSP45 .
1.Introduction of YT24 air leg rock drill YT24 air leg rock drill is a highly efficient rock drilling machine. It is widely used in rock tunneling and drilling blastholes in various rock drilling operations. It is an important machine in stone works such as mining, railway, transportation and water conservancy construction. YT24 air leg rock drill is used in a wide range of applications. It is suitable for drilling horizontal or inclined blastholes on medium-hard or hard (f=8~18) rocks with a drilling depth of up to 5 meters. This machine can be used with the FT140BD short air leg or FT140B long air leg according to the section size of the roadway. It can also be installed on the drill or drill stand. 2.Parameters of YT24 air leg rock drill Weight 24 kg Dimensions 678*228*184 mm Piston diameter 70 mm Piston stroke 70 mm Working pressure 0.5-0.63 mpa Rotating speed 250 r/min Air pipe inner diameter 19 mm Water pipe inner diameter 13 mm Drilling diameter 34-42 mm Drilling depth 5 m Shank size 22*108 mm FY200B Oil injector Oil storage 200 ml Weight 1.02 kg FT140B type air leg Weight 15.6 kg Leg length 1687 mm Advancement 1250 mm Cylinder inner diameter 60 mm Shandong Master Machinery Group specializes in supplying pneumatic rock drillï¼?the main models are: QCZ-1, QCZ-2, Y6, Y8, Y10, Y24, Y26, YO18, Y19A, Y20LY, 7665, 7655, YT23, YT24, YT27, YT28, YT29A ,YSP45 .
Mimaki CG-130 SRIII Cutting Plotter Specification for Mimaki CG-60 SRIII Cutting Plotter mimaki-cg-60-sriii-cutting-plotter.png Mimakis new CG-130SR III range of cutting plotters features a 137 cm wide desktop model professional production unit. All with the capability to cut to a wider range of substrates and applications at higher speeds that ever before. By delivering a practical and cost effective solution for every sign and graphics need, the highest possible return on your investment is assured. Suitable Applications Stickers, Labels, Decals, Graphics and Signage, with the added benefit of half-cut and over-cut functions. As well as fold lines for PoP applications making the finished items even easier to apply and more professional looking.
Mimaki CG-130 SRIII Cutting Plotter Specification for Mimaki CG-60 SRIII Cutting Plotter mimaki-cg-60-sriii-cutting-plotter.png Mimakis new CG-130SR III range of cutting plotters features a 137 cm wide desktop model professional production unit. All with the capability to cut to a wider range of substrates and applications at higher speeds that ever before. By delivering a practical and cost effective solution for every sign and graphics need, the highest possible return on your investment is assured. Suitable Applications Stickers, Labels, Decals, Graphics and Signage, with the added benefit of half-cut and over-cut functions. As well as fold lines for PoP applications making the finished items even easier to apply and more professional looking.
1.Brief introductions of HZ-130YY hydraulic core drilling rig HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage. 2.Applications of HZ-130YY hydraulic core drilling rig ·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes. ·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite. ·2-9 grades of sandy clay and rock. 3.Features of HZ-130YY hydraulic core drilling rig ·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers. ·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable. ·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact ·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on. This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance. 4.Technical parameters of HZ-130YY hydraulic core drilling rig HZ-130YY hydraulic core drilling rig Drill hole depth 130m Maximum opening diameter 75-220mm Final hole diameter 75mm Take the initiative to drill pipe 53/59*4200mm Drill pipe diameter 50mm Borehole inclination 90°-75° Power(diesel engine) 13.2kw 2200r/min Size 850kg/2400*950*1400 Vertical shaft Vertical spindle speed 142/285/570r/min Vertical stroke 450mm Hoist Single rope lift 9.6kn Single rope winding speed 0.41/0.82/1.64m/s Drum diameter 140mm Diameter of wire rope 9.3mm Wire rope capacity 27m Derrick Rated load 2t Effective height 6m Towerleg specifications 73mm Mud pump Model BW95 Flow 95l/min Maximum pressure 1.2mpa Reciprocating frequency 93r/min Suction pipe diameter 51mm*4.5m Diameter of high pressure pipe 32mm*6m
1. Characteristics of XYD-200 crawler hydraulic core drilling rig ·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits. ·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement. ·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working. ·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly. ·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country. 2. Technical parameters of XYD-200 crawler hydraulic core drilling rig XYD-200 crawler hydraulic core drilling rig Drilling depth 200m Maximum opening diameter 75-300mm Final hole diameter 75mm Kelly 53/59*4200mm Drill pipe diameter 50/60mm Drilling angle 90°-75° Auxiliary power diesel engine 16.2kw 2200r/min Structural weight/Size 3000kg 3800*1950*2700 Spindle Spindle speed 64/128/287/557r/min Spindle stroke 450mm Windlass Single rope lifting force 24kn Single rope lifting speed 0.12/0.22/0.49/0.95m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 35m Derrick Rated load 5t Effective height 6m Tower leg specification 89mm
1.Features of XY-130 hydraulic core drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 2.Specifications of XY-130 hydraulic core drilling rig XY-130 hydraulic core drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90 Drill weight (Not include power) 600kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
