Manufacturer and exporter of tool aprons, tool pouches, tool holders, tool buckets, tool bags, bag packs, knee pad, belts & suspenders, tool roll & pouches in leather/ canvas/ nylon. We can do customized exactly what you want, according to your samples
PD1000-STG5 Model PILE DRIVER MACHINE TECHNICAL DETAILS Motor Yanmar STG-V Motor Hammer power 1000 Joule Number of blows/min 440-880 bpm Hammer weight 485 kg Oil tank capacity 150 L Oil pressure 180 Bar Fuel tank capacity 50 L Max. pile length 4500 mm Total weight 4500 kg Column inclination +15 �° / - 65 �° Lateral inclination +15 �°/ -15 �° STANDARD EQUIPMENTS Lightening Radiator water level sensor Hydraulic oil level sensor Hydraulic oil temperature sensor Safety valves Hydraulic oil cooler radiator Hydraulic pump 90 liter tool kit Digital display OPTIONAL EQUIPMENTS DTH / Rock drilling Auger Automatic levelling Remote control system GPS Post extraction apparatus Post mold according to post section
PD1000-STG3 Model PILE DRIVER MACHINE TECHNICAL DETAILS Motor Yanmar STG-III Motor Hammer power 1000 Joule Number of blows/min 440-880 bpm Hammer weight 485 kg Oil tank capacity 150 L Oil pressure 180 Bar Fuel tank capacity 50 L Max. pile length 4500 mm Total weight 4500 kg Column inclination +15 �° / - 65 �° Lateral inclination +15 �°/ -15 �° STANDARD EQUIPMENTS Lightening Radiator water level sensor Hydraulic oil level sensor Hydraulic oil temperature sensor Safety valves Hydraulic oil cooler radiator Hydraulic pump 90 liter tool kit OPTIONAL EQUIPMENTS DTH / Rock drilling Auger Automatic levelling Remote control system GPS Post extraction apparatus Post mold according to post section
Drilling cap. In Steel 40mm Drilling cap. C. I. 45mm Tapping in M. S. 30mm Spindle center to col. 890 / 387 mm Spindle travel 235 mm Spindle nose to base 900 / 185 mm Dia. of column 165 mm Dia. of RAM 72 mm Size of table 380 x 280 x 275 mm Overall base size 1270 x 745 x 200 mm No. of spindle speed (8 speed) 90 to 2630 RPM Taper in spindle base MT-4 Machine area of base 1200 x 605 mm Drill motor (gear drive) 1.5 HP & 1 HP Total height 1900 V-Belt size A-24, B-46 Net Weight 890 Kgs
SPECIFICATION : VMT 38 Drilling cap. In Steel 38 MM Drilling cap. C. I. 45 MM Tapping in M. S. 20 MM Spindle center to col. 320 MM Spindle travel 240 MM Spindle nose to base 1000 MM Dia. of column 120 MM Dia. of RAM 72 MM Size of Sq. Table 375 x 475 MM Overall base size 720 x 470 MM No. of spindle speed (8 speed) 90 to 2630 Taper in spindle base MT-3 Machine area of base 485 x 445 MM Drill motor (gear drive) 1.5 HP 1440 RPM Total height of machine 1800 V-Belt size B-58 Net Weight 325 Kgs.
One end connect with the shank end, the other end connect with bit end. Transmit the impacting power and torque from shank to bit, the lifespan depends on the material, thread processing. ï?¬ Made from the same steel as Sandvik; 23CrNi3Mo, which is in same league as Sandvik Sandbar 64, is applied as drill rod material. ï?¬ Friction welding workmanship . It makes the thread and the body integrated without broken. ï?¬ Advanced production process: produced by CNC machining and advanced heat treatment. It will connect the drill rod and the drill bit more better. â?¢ Optimize processing procedure, entirely automatic threading equipment to finish the thread naturally and reduce the concentration of stress. ï?¬ Full-carburization drill rod for high wear-resistance and strength. Carburizing process is applied to promote surface hardness, thus grant better wearing quality and lifespan for the drill rods; ï?¬ Quality close to world famous brands, but our prices are much more competitive. ï?¬ Complete types of drill rod for various drilling scenarios. Advanced engineering, precision manufacturing and high-grade materials assures the reliable quality of our drill rod. When you send inquiry, please tell the information as following: Diameter + length +thread
25 mm capacity Pillar type Drilling machine with S.G.I Steel Gears. With Electric Motor, Reverse/Forward Switch and V-Belt. Max. capacity in Mild Steel 25 mm Spindle Taper MT-3 SGI Steel Gears (Heavier than ordinary Cast Iron (casting) gears. Dia. of Ram 72 mm Dia. of Column 90 mm Spindle Centre to column 250 mm Table Size: - 345 x 345 mm Max. Distance Spindle nose to Table 710 mm Max. Travel of Spindle 150 mm Motor 1 HP 3-Phase
40 mm capacity Radial type Drilling machine with All Geared (Fully oil bath 9 speeds gear box with single speed Electric Motor), Heavy Duty and Successful Auto Feed (2 Feed) with Fine Feed Gear Box, Fully oil bath Head Lifting Gear box, Harden gears with complete Electricals (2 HP and 0.5 HP. Ele. motors and Panel board) and Molded Coolant Tank in base. With Box Table. Drilling Capacity 40 mm In Mild Steel Drilling Capacity 45 mm in Cast Iron Dia. of Ram 78 mm Dia. of Column 165 mm Auto Feed 0.04 and 0.08 (mm per spindle rotation) Spindle Travel 260 mm Machine Base LxBxH 1290 x 760 x 190 mm Max. Min. Distance Spindle Nose to base 925 to 230 mm Max. Min. Distance Spindle Center to column 875 x 360 mm Size of Box Table 305 x 305 x 380 mm Main Motor 2 HP 1440RPM Lifting Motor 0.5HP 1440RPM
40 mm capacity Radial type Drilling machine (Back Geared Drive) with S.G.I Steel Gears, Molded Coolant Tank in Base and fully Oil bath Lifting Gear box. With 2 Electric Motor, 2 R/F Switch and 2 V-Belts. With Box Table. Drilling Capacity 40 mm In Mild Steel Drilling Capacity 45mm in Cast Iron Tapping Capacity 25mm in Mild Steel Tapping Capacity 30mm in Cast Iron SGI Steel Gears Heavier than ordinary Cast Iron Gears. Spindle Tapper MT-4 Dia. of Ram 78 mm Dia. of Column 165 mm Spindle Travel 260 mm Working Area of Base 870 x 760 mm Machine Base LxBxH 1290 x 760 x 190 mm Max. Min. Distance Spindle Nose to base 925 mm to 230 mm Max. Min. Distance Spindle center to column 875 x 360 mm
1.All our Products have been API7-1,ISO 9001, ISO9001:2008, ISO14001:2004. 2.Products are exported to various countries We have partners in the 3.We have our own strong design team,wide range of products and many kinds
1.The use of new surface wear-resistant materials, more effective use of positive and negative ions to prevent mud package more effectively. 2. Optimize the structure design, increase the narrow area in the design of the drill bit, deepen the channel, improve the thickness of the blade reasonably, so as to increase the flow passage area in the use of the drill bit in the maximum range, and improve the chip removal ability of the drill bit. 3. Using bottom-hole simulation and nozzle optimization design, the number and position of nozzles are reasonably arranged, which can prevent mud bag more effectively. 4.We also have other high quality drill bit products.
1.The use of new surface wear-resistant materials, more effective use of positive and negative ions to prevent mud package more effectively. 2. Optimize the structure design, increase the narrow area in the design of the drill bit, deepen the channel, improve the thickness of the blade reasonably, so as to increase the flow passage area in the use of the drill bit in the maximum range, and improve the chip removal ability of the drill bit. 3. Using bottom-hole simulation and nozzle optimization design, the number and position of nozzles are reasonably arranged, which can prevent mud bag more effectively. 4.We also have other high quality drill bit products. 5.If you wann it please contact me.
1.All our Products have been� API7-1,ISO 9001, ISO9001:2008, ISO14001:2004. 2.Products are exported to various countriesï¼?We have partners in the United States. 3.We have our own strong design team,wide range of products and many kinds .Cutters import from USA If you have any questions,please feel free to contact me .
25mm capacity Radial Drilling Machine. Max. Drilling Capacity in Mild Steel (MS) 25mm Max. Drilling Capacity in Cast Iron (CI) 30mm Max. Drilling Stroke/Spindle Travel 225mm
1.All our Products have been API7-1,ISO 9001, ISO9001:2008, ISO14001:2004. 2.Products are exported to various countries We have partners in the United States. 3.We have our own strong design team,wide range of products and many kinds .Cutters import from USA
As an efficient anchoring method, self drilling rock bolt is used in complicated, loose and broken geological condition. It�¢??s widely applied to pre-support project, radial support project, slope stabilization, foundation support project, roadway support project, soil nail wall, back pull anchor rod retaining wall and other rock supporting work. Functions: Self drilling anchor system is an advanced system which can ensure the anchoring effect for complex ground conditions. It can be integrated with the functions of drilling, grouting and anchoring. Conditions: Self drilling anchor bolt system is mainly used for slope stabilization, foundation with micropiles and tunneling, it�¢??s also widely used in the railway system, metro project, etc. It can be installed in sites with weak rocks, loose soil, weathered layer, sand with stone layer and so difficult to create a hole in complex formation. The unconsolidated ground condition favor the self drilling anchor bolt technique for fast and simple method of installed compared to the traditional method. Features and advantages: 1. It features a hollow bore for flushing, or simultaneous drilling and grouting. 2. Reliable, Efficient and Convenient. 3. Choice of drill bits for different ground conditions. 4. It can be elongated by using couplers. 5. Suitable for anchoring in broken geological condition and narrow space, which has achieved perfect effect.
As a modern supporting rock drilling tool, the shank adapter is produced with the development of drilling technology and rock drilling conditions. In terms of rock drilling technology, when developing from shallow hole drilling to medium and deep hole drilling, due to the limitation of the working section, to obtain deeper rock holes, it is necessary to use coupling sleeves on the same axis of the drill rod. Connect multiple drill rods for drilling. The shank rod used in this rock drilling process is the prototype of the development of the shank adapter. With the development of rock drilling equipment, the matching parts of the shank rod as a matching drill tool and the rock drill are more complicated, and the technical requirements for connection and cooperation are becoming more and more strict. To adapt to the changes, shank adapters of various structures have been produced. Shank adapter classification Common shank adapters are mainly divided into three categories: flange-type shank adapters, lug-type shank adapters, and spline adapters. The cross-section of the flange-type shank adapter is hexagonal, 22mm or 25mm for the inscribed circle diameter and 108mm or 159mm for length. It is manufactured by the forging process and is used for light rock drills. The lug-type shank adapter is used for inner-rotating medium-sized guide-type rock drills, and the diameter of the drill rod is 25mm or 32mm. The spline adapter is often used for heavy-duty guide-type external rotating rock drills with large torque, and the diameter of the drill rod is more than 38mm. It is often manufactured by a mechanical process. Product Parameters Shank adapter for pneumatic guide rock drill: It is suitable for small rock drills and can be operated manually. Shank adapter for Atlas Copco rock drill: It is suitable for the Atlas Copco rock drill, one of the most commonly used rock drills. Shank adapter for Sandvik Tamrock rock drill: It is suitable for the Sandvik Tamrock rock drill, one of the most commonly used rock drills. Thread size: R28, R32, R35, R38, T38, T45, T51. For more product specifications, Please email us or leave us a message. advantage 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.
The drill rod is the part that links the drill bit and the shank adapter in the rock drill and undertakes the task of transmitting the impact energy to the drill bit, the rotational torque, and the flushing medium. In actual use, the force conditions of the drill rod are harsh, and it is easy to consume a large number of wearing parts. Product Category Drill rods include tapered drill rods and threaded extension rods according to their connection methods. Tapered drill rod: It is suitable for drilling shallow holes, the tail is connected with the rock drill using the shank adapter, and the tapered part of the head is connected with the drill bit. Threaded extension rods: It is more suitable for drilling deep holes. It can use a sleeve with female threads to connect two drill rods with male threads. With the deepening of the hole depth, multiple drill rods can be connected. It is very convenient to remove the rod from the connection after chiseling. Except by connection type, drill rods include light drill rods and heavy drill rods. Light drill rods include tapered drill rods, shank rods, and integral drill rods. Heavy drill rods mainly include drill rods used for drifting and tunneling rigs, benching drilling rigs, and Open-cutting drilling rigs. Length Light drill rods: 300mm-6000mm(without shank, the conventional length of the shank is 108mm). Heavy drill rods: 600mm-2000mm(Drill rods less than five meters are available). 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.
The rock drill bit is connected with the drill rod, through the drive of the rock drill to achieve the purpose of cutting rock parts, the whole system to bear the greatest impact and wear parts. There are different types of rock drill bits, such as chip bits, button bits... Kelleg offers a wide range of rock drill bits, including top hammer bits and DTH drill bits. Top hammer bit type 1. chisel bit: suitable for light rock drills to drill rock formations with low hardness. 2. Cross bit and X bit: suitable for drilling cracked rock formations and highly abrasive rock formations under the condition of rock drills with large impact power, and have strong radial abrasion resistance. 3. Button bit: Under the condition of a rock drill with a large impact power, it is more suitable than a flaky insert drill bit, has a higher rock drilling speed and service life, and the drilled hole shape is relatively round. 4. Diameter of drill bit: chisel bits: 32mm-42mm cross bits: 34mm-65mm X bits: 55mm-65mm button bits: 38mm-150mm DTH drill bit type 1. Including low-pressure DTH drill bits, medium and high-pressure DTH drill bits (high-efficiency and energy-saving types) 2. Nominal diameter: low-pressure DTH drill bits: 70mm- 250mm medium and high-pressure DTH drill bits: 90mm-508mm Efficient energy-saving medium and high-pressure DTH drill bits: 110mm-254mm For more product specifications, Please email us or leave us a message. Kelleg's advantage 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.
Our tapered drill bit is from alloy steel and tungsten carbides by forging treatment. it can connect with tapered drill rod well for air leg or hand-held rock drill machines for drilling holes in gold and coal mining, marble and granite quarries, stone project, tunnel, water conservancy, etc.Applicable Industries: Applicable Industries: Construction works , Energy & Mining, drifting, tunneling Weight (KG): 0.3 Type: DRILL BIT Machine Type:Drilling Tool Material: High Manganese Steel, Tungsten Carbide Processing Type:Forging Use:Ore Mining Color:customized Usage:Drilling and Construction Application:Stone Drilling, Coal Mining,Quarry drilling, Construction Certification: ISO9001 Advantage: high quality ,High Performance button: 6-8 buttons Heat treatment: Fully carburization
