Jig Saw M1Q-MD-65 Cutting Capacity:65mm No_Load Speed:0-3100r/min Rated Input power:650W Rated Volatage:110/240V Rated Frequency:50/60Hz
2000 horse power drilling rig
Mud pump
300pcs combination drill set (7pc twist drill, 5pc super masonry drill, 5pc carpent drill, 17pcs bits and other screw nails), Abs plastic box
D.T.H. drilling rig
Drill bits
Feature 1. ííThe spindle speed and feed change are affected by their eparate machine levers, and therefore easily and accurately conrtrolled. 2. ííThe cutting depth is controlled by the drill depth stop. Thus the drill can automatically stop. 3. ííThe spindle head and the arm as well as column are reliable clamped by means of clamping mechanism, which makes easy maintenance possible. 4. ííThe spindle head movement and the arm rotationg are light and quickíú 5. ííThe arm is raised and lowered by a couple of gears. The arm elevating unit is provided with mechinical and eletrical safety. 6.ííThe guideways of the arm, the outer and inner cloumns are wear-resistant for long service life.
1. ííThe special motor for high-frequnency clockwise and conter-clockwise ratation is adopted and max, tapping ftrquency is 50 times per miunte. 2. ííThe feed mechanism with clearance spring is driven by change-gears and is suitable for excruding taps. 3. ííThe tappping depth can be adjusted addutely by the tapping-depth-stop.
Tank drilling machines
This machine is designed for drilling, counterboring, spotfacing, tapping etc, in small or middle sized components. It is intended for single piece, small batch or batch production in machine or repair shops.
Max. distance from lower edge of ram to table 370 mm Max. travel of table Horiazontal 500 mm Vertical 300 mm Max. swivel angle of table Without vice í+90íp With vice í+55íp Max. vertical travel of tool head 110 mm Frequency of ram strokes 15,24,37,51,64,80, 102,126,158 times/min Table feed per ram stroke Pawl riding over 1 ratchet tooth Horiazontal 0.0845 mm Vertical 0.133 mm Pawl riding over 10 ratchet tooth Horiazontal 0.845 mm Vertical 1.33 mm Motor 3kW1420 r/min Vice measurements ú¿Lí- Wí- Max. openingú¬ 240í-64í-215 mm Overall dimensionsú¿Lí- Wí- Hú¬ 1943í-1160í-1533 mm Packing sizeú¿Lí- Wí- Hú¬ Export 2150í-1340í-1470 mm Import 2210í-1450í-1470 mm Net Weight 1800 kg Gross Weight 2100 kg
Sander polisher Max disc diameter 180mm Rated voltage 220-240v Frequency 50hz No-load speed 0-3000rpm Rated input power 1050w Spindle thread m14x2, m16x2 Power supply cord 2.5m(8.2 ft.) Weight 3.7kg Moq 500pcs
Marble cutter Blade diameter 110mm(4-3/8'') Rated voltage 220-240v Frequency 50hz Max.Cutting capacity 34mm(1-5/16'') No-load speed 12.000rpm Rated input power 1.200w Power supply cord 2.5m(2.2 ft.) Weight 2.9kg Moq 500pcs
Electric drill Max drilling diameter 6.5mm(1/4'') Rated voltage 220-240v Frequency 50hz No-load speed 2.500 rpm Rated input power 290w Power supply cord 2.5m(8.2 ft.) Weight 1.1kg Moq 500pcs
Rotary hammer Max drilling diameter 20mm(13/16'') Rated voltage 220-240v Frequency 50hz No-load speed 850 rpm Rated input power 500w Power supply cord 2.5m(8.2 ft.) Weight 2.3kg Moq 500 pcs
Hand Tools Drlls / Cutting tools Name: 206011 206011 Masonry drill zince plated Size:- 3-32mm
The bits are used for diamond core drilling, geological prospecting, mineral exploration etc etc. 100 noa min per size.
Indy series hammers are valveless hammers eliminating operational problems and improves reliability. It has an optimized air cycle frequency, high-energy impact giving maximum penetration rates Wooden pallet, wooden box for sea Card board boxes for air
Drilling cum milling machine Drilling in m.S.-40, drilling head spindle hole taper -mt-4, spindle travel-250, diameter of ram-78, spindle autofeed ranges-0.05 & 0.09 mm/rev., max. Drilling radius-990, machine measurement-1200 x 780 x 2100
Technical characteristic Adopting the advanced production line crack detecting, quenching, the continuous overall tempering and sand blasting processes to achieve higher mechanical strength ability with overall good performance. 1 íóThe thread is cut by the special-purpose numerical control lathe which keeps the rod body still when cutting the threads. The special process could ensure the high precision of the thread with better reliability and life-span. 2 íóCoupling phosphor or copper coated to achieve good wearing-resistance ability and anti-thread gluing ability. Tubing Size in OD in(mm ) Wall in(mm ) Grade Length ft(mm ) Standard EUE 23/8 2.375(60.33 ) 2.594(65.90 ) 0.190(4.83 ) J55 N80 L80 C90 T95 P110 28 í½32(8530 í½9750 ) 27/8 2.875(73.03 ) 3.094(78.60 ) 0.217(5.51 ) 31/2 3.500(88.90 ) 3.750(95.20 ) 0.254(6.45 ) Coupling Size in OD in(mm ) Min Length in(mm ) Grade End Width in(mm ) Weight lbs(kg ) Standard EUE Standard EUE Standard EUE Standard EUE 23/8 2.875(73.03 ) 3.063(77.80 ) 41/4(107.95 ) 47/8(123.83 ) J55 N80 L80 C90 T95 P110 3/16(4.76 ) 3/16(4.76 ) 2.82(1.28 ) 3.43(1.55 ) 27/8 3.500(88.90 ) 3.668(93.20 ) 51/8(130.18 ) 51/4(133.35 ) 7/32(5.56 ) 5.15(2.34 ) 5.29(2.40 ) 31/2 4.250(108.00 ) 4.500(114.30 ) 55/8(142.88 ) 53/4(146.05 ) 1/4 (6.35 ) 8.17(3.71 ) 9.03(4.10 ) Main Technical Parameter
