Sges review, interpret data and perform engineering analyses related to the soils and rocks beneath and provide foundation consultancy.
The main technical level of Down-Hole Drilling Rig, with nine patents, has remain the international advanced level. The notable features are as follows: 1. Integration of drilling mechanism, air-compressed supplying system and power group provide improved maneuverability, energy saving and high efficiency. 2. Parts worldwide procurement, chose from well-known brands, actualize the higher efficiency and reliability. 3. Pilot handles control all the machine operations, the various movements and speeds can be adjusted at any time. All of above make sure the machine operate normally and accurately. 4. High reliable crawler traveling system, hydraulic motor driving drilling rod ,and hydraulic cylinder supported sliding rack optimize working efficiency and machine adaptability. 5. Hydraulic disassembly mechanism for impact ,drilling system ,drilling bit. 6. High effective dust collection device and the anti-hoisting device, which is the original patent at home and abroad, improve the working environment effectively. 7. High effective dust collection device and the anti-hoisting device, which is the original patent at home and abroad, improve the working environment effectively. 8. The domestic unique auto block-prevention mechanism can lift the drill stem automatically when the stem got stuck, making the stoppage much less than before. 9. The patent technology self-adaptive control to the force on the drilling process, cooperating with the auto-sensing control to various rock conditions and decrease the block faults. Nude package for main machinery.
GP-1 twist drill sharpener Drill Diameter: 2-13mm Point Angle: 90 - 140 degree Power Supply: AC110V/AC220V. Weight: N.W. 7KG/ G.W.:8KG Machine Size: L280*W133*H155mm Packing Size: L330*w205*H225mm.
The products for triplex and duplex mud pumps are referring as below: Mud pump: EMSCO: F-500, F-800, F-1000, F-1300, F-1600 National: 12P-160 Gardener Denver: PAH, PZ-9/10/11, TEE 165 Weatherford: T-425 Ellis Williams: EWS 440, EWS 446 (EWS SERIES) Cementing and Fracturing Pump: TP250, TP300, TP350, TP450, TP500, TP600,TP800, TP1000, TP2500 Halliburton:HT-400 Downhole Motor Centrifugal and sand pumps: 10814,8x6x14,8x6x11,6x5x14,6x5x11,4x3x13,3x2x13 Mud pump parts with API 7K-0206 are interchangeable with OEM. Premium chrome Liner, Chrome-plated Liner, Hardened Steel Liner, Ceramic Liner, 3-web Valve and Seat, 4-web valve and seat, Full-open Valve and Seat (KQ/G2/FO), Rubber Renewable Piston, Urethane Renewable Piston, Rubber Bonded Piston, Urethane Bonded Piston, Piston Rod, Piston Rod Clamp, Upper and Lower valve Guide, Extension Rod, Threaded Ring, Liner End Cover, Valve Pot Cover, Cylinder Head, Cylinder Head Plug, Liner Seal, Valve Cover Gasket, Cylinder Head Gasket, Module (Fluid ends), Hammer Union, Centrifugal pump, etc.. By "Quality Prior, Customer First, Price Competitive & Delivery Swift", our customers have grown to the areas in both South & North America, Europe, Middle East, Africa, Middle Asia & Southeast Asia. Simultaneously, we manufacture parts for many customers according to their drawings under our Sound Quality Control system (SQCS), Total Quality Management (TQM) and strict oilfield supplying system (SOSS). Now we had set up and implemented a set of strictly supplying system no matter what small parts or huge equipments are in order to manufacture High quality & Competitive Price to our customer all over the world. We are sure that you will get continuous best services and unlimited solutions for your drilling equipments from Qingdao Hongbo.
Our DTH hammer and bits has following advantages: Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to inner structure of HD series DTH hammer designed according to newest rock drilling theory. Smooth performance and long service life of HD series DTH hammer due to high quality alloy steel materials and advanced processing technology adapted. Low problem rate and easy to maintenance due to simple , reliable and easy assemble and disassemble inner structure of hammer. Easy to depart bit from hammer due to multi head thread connecting chuck and cylinder of hammer. Interchangeable with DTH bit and dill pipe manufactured by Atlas copco and Ingersoll rand. Product Specification/Models: various sizes and styles are available here. Application: for mining, water well drilling, quarrying. We can produce the size from 90mm to 250mm.
Face milling cutters Angle: 90degree Cutting Diam: Min:50mm,Max:160mm Insert: APMT1604,APKT1604 Insert brand: ISO CODE Color: Black We could offer the insers and the face mill holder and we could resale too.
Roller cone bit (IADC) Comperess strength: 200mpa.
Kelly bar is the key part of a drilling machine, and its quality directly affects the performance of the whole machine. The main purpose of kelly bar is to transfer the torque of rotary drive and crowd pressure of the crowd system to the drilling tool. Based on the rich manufacturing experience and by absorbing the advanced technology both at home and abroad, we can produce first-class kelly bar which can be compared favorably with the imported ones. The features of UNIMATE kelly bar are as follows: Adopt the advanced technology of 6-key design in the world and standard modular design. Equipped with advanced processing facilities, workmanship and manufacturing equipments, UNIMATE kelly bar enjoys a low weight, high strength, high straightness of single bar, thinner tube, smaller inter-tube distance and good abrasion resistance. The raw materials are either imported from Germany like the high abrasion resistance materials, or from Chinese top manufacturer such as the seamless steel tube with alloy. All the tubes made in China are specially made seamless alloy tube, which guarantees the accuracy of the sizes, location, physical properties and easy welding. The small-diameter tubes undergo reheat treatment. The friction kelly bar can be used under full torque. All the outer keys have undergone special heat treatment; therefore, they possess higher hardness, higher flexibility and excellent welding properties, which provide higher abrasion resistance to the keys. There are mainly two types of Kelly bars: 1-Interlocking Kelly Bar 2-Friction Kelly Bar Friction Kelly Bar Friction Kelly bars are used with piling rigs for drilling in silt, clay and less dense sand and gravel. The Friction Kelly bars manufactured by Unimate are un-lockable with drive keys on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose. Steel pallet, wooden case.
Drilling buckets are mainly used for drilling water-bearing sandy soil, sludge, clay, muddy sub clay, sandy gravel, cobble, and weathered soft formation. The bucket can be designed into cylindrical type and conical type according to bucket diameter, type of drilling rig and soil conditions. The opening and closing device can be operated manually, mechanically or mixed manner. The welding angle of bucket teeth can be designed according to formation conditions. The bottom cover is made of high-strength Mn plate, and the cutting edge includes single-layer type and double-layer type; the soil inlet also includes single-bottom type and double-bottom type. Unimate drilling buckets are mainly divided into three types: 1-Clay Drilling Buckets 2-Rock Drilling Buckets 3-Cleaning Buckets 1) Clay Drilling Buckets There are two categories of clay drilling buckets: a)Single Cut Clay Bucket b)Double Cut Clay Bucket Drilling Diameter Range: 500~2500mm Barrel Length: 1000~1500mm Main Applications: i)These buckets are suitable for drilling in clay, silt and loose to medium dense sand and gravel. ii)Single cut buckets are recommended up to coarse gravel. iii)Double cut buckets are mainly used for bigger diameter uncased boreholes. iv)Single bottom buckets are used for clay layer and sticky formation. Features: 1-Cylindrical barrel & conical barrel(depends on customer demand) 2-Fish-tail Pilot 3-Throughout ventilation hole 4-Hard facing strips for wear protection 5-Kelly box size as per customer demand 2) Rock Drilling Buckets There are two categories of rock drilling buckets: a)Single Cut Rock Bucket b)Double Cut Rock Bucket Drilling Diameter Range: 500~2500mm Barrel Length: 1000~1500mm Main Applications: i) Rock buckets are suitable for drilling in medium to weak rock and in very dense sand and gravel. ii) Single cut buckets are recommended up to coarse gravel. iii) Double cut buckets are recommended for secant piles and bigger diameters uncased boreholes. Features: 1-Throughout ventilation hole 2-Rock Pilot 3-Hard facing strips for wear protection 4-Kelly box size as per customer demand 3) Cleaning Bucket Cleaning Diameter Range: 500~2500mm Barrel Length: 1000~1500mm Main Application: Cleaning bucket is used for cleaning the bottom of borehole. Steel pallet, wooden case.
Drilling Augers Short augers are mainly divided into the following types: 1-Conical Rock Auger 2-Flat or Butterfly Rock Auger 3-Flat or Butterfly Clay Auger 1) Conical Rock Auger There are two categories of conical rock augers: a)Single Cut Auger b)Double Cut Auger Drilling Diameter Range: 500~2500mm Main Applications: i) Single Cut and Double Cut Augers are suitable for drilling in medium to strong rock (15~60 MPa) ii) Double Cut are recommended in bigger diameters uncased boreholes Features: 1-Rock Pilot 2-Hard facing strips on flights for wear protection 3-Kelly box size as per customer demand 2) Flat or Butterfly Rock Auger: There are three categories of Flat or Butterfly Rock Auger: a)Single Cut Auger b)Double Cut Auger c)Double Cut Auger without Rock Pilot Drilling Diameter Range: 500~2500mm Main Applications: i) The Single Cut and Double Cut Augers are suitable for drilling in weak fractured rock and very dense sand and gravel (Less than 5 MPa) ii) Double Cut Augers are mainly used for bigger diameter uncased boreholes and secant piles iii) Double Cut Auger without rock pilot are recommended for fractured rock or moderately weak to moderately strong rock (5~50 MPa) Features: 1-Rock Pilot 2-Hard facing strips on flights for wear protection 3-Kelly box size as per customer demand 3) Flat or Butterfly Clay Auger There are two categories of Flat or Butterfly Rock Auger: a)Single Cut Auger b)Double Cut Auger Drilling Diameter Range: 500~2500mm Main Applications: i) The Single Cut and Double Cut Augers are suitable for drilling in clay, silt and loose to medium dense sand and gravel ii) The Single Cut and Double Cut Augers with side cutters are suitable for drilling in hard clay, silt and medium to high dense sand and gravel iii) Single Cut Augers are recommended up to coarse gravel Features: 1-Fish-tail Pilot 2-Hard facing strips on flights for wear protection 3-Kelly box size as per customer demand. Steel pallet, wooden case.
Kelly bar is the key part of a drilling machine, and its quality directly affects the performance of the whole machine. The main purpose of kelly bar is to transfer the torque of rotary drive and crowd pressure of the crowd system to the drilling tool. Based on the rich manufacturing experience and by absorbing the advanced technology both at home and abroad, we can produce first-class kelly bar which can be compared favorably with the imported ones. The features of Unimate kelly bar are as follows: Adopt the advanced technology of 6-key design in the world and standard modular design. Equipped with advanced processing facilities, workmanship and manufacturing equipments, UNIMATE kelly bar enjoys a low weight, high strength, high straightness of single bar, thinner tube, smaller inter-tube distance and good abrasion resistance. The raw materials are either imported from Germany like the high abrasion resistance materials, or from Chinese top manufacturer such as the seamless steel tube with alloy. All the tubes made in China are specially made seamless alloy tube, which guarantees the accuracy of the sizes, location, physical properties and easy welding. The small-diameter tubes undergo reheat treatment. The friction kelly bar can be used under full torque. All the outer keys have undergone special heat treatment; therefore, they possess higher hardness, higher flexibility and excellent welding properties, which provide higher abrasion resistance to the keys. There are mainly two types of Kelly bars: 1-Interlocking Kelly Bar 2-Friction Kelly Bar Interlocking Kelly Bar Interlocking Kelly bars are used with piling rigs for drilling in dense sand and gravel and weak to strong rock. The Interlocking Kelly bars manufactured by Unimate can be fully locked by mechanical locking system on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose. Steel pallet , wooden pallet.
Design criteria: A - mill size or cutting diameter B - shank diameter C - length of cut or flute length D - overall length Angular Edge - That cutting edge that is a straight line, forming an angle with the cutter axis. The surface produced by a cutting edge of this type will not be flat as is the case with a helical cutting edge. Axial Run out - The difference between the highest and lowest indicator reading taken at the face of a cutter near the outer diameter. Chamfer - A short relieved flat installed where the periphery and face of a cutter meet. Used to strengthen the otherwise weak corner. Chip Breakers - Special geometry of the rake face that causes the chip to curl tightly and break. Chip Splitters - Notches in the circumference of a Corn cob style End mill cutter resulting in narrow chips. Suitable for rough machining. Core Diameter - The diameter of a cylinder ( or cone shape with tapered End mills) tangent to the flutes at the deepest point. Counter bore - A recess in a non-end cutting tool to facilitate grinding. Cutter Sweep (Run out) - Material removed by the fluting cutter (or grinding wheel) at the end of the flute. Cutting Edge (A) - The leading edge of the cutter tooth. The intersection of two finely finished surfaces, generally of an included angle of less than 90 degrees. Cutting Edge Angle - The angle formed by the cutting edge and the tool axis. Differential pitch cutters - A specifically designed variation in the radial spacing of the cutter teeth. This provides a variation in tooth spacing and can be beneficial in reducing chatter. This concept is based on reducing the harmonic effect of the tool contacting the part in an exact moment of vibration. Entrance Angle - The angle formed by a line through the center of the cutter at 90 to the direction of feed and a radial line through the initial point of contact. As this angle approaches 90 degrees the shock loading is increased. Entrance Angle: Ramp-in - Angle or radius value to enter the cutter into the part surface Fillet - The radius at the bottom of the flute, from which core diameter is found. Flute - Space between cutting teeth providing chip space and regrinding capabilities. The number of cutting edges. Sometimes referred to as "teeth" or "gullet". The number on an end mill will determine the feed rate. Flute Length - Length of flutes or grooves. Often used incorrectly to denote cutting length. Shank - Projecting portion of cutter which locates and drives the cutter from the machine spindle or adapter Straight Shank - Cylindrical shank, with or without driving flats or notches, often seen on carbide end mills Weldon Shank - Industry name for a specific type of shank with a drive and location flat. The flat on the cutter provides positive ( non slip ) driving surface to the End mill. Tooth - The cutting edge of the End mill. Tooth Face - Also known as the Rake Face. The portion of the tooth upon which the tooth meets the part. END MILL TECHNICAL FEATURES Back taper - A slight taper resulting in the shank end of the cutting diameter being smaller than the cutting end. This condition aids not only the plunging or drilling condition but also tends to compensate for deflection. Clearance - Space created by the removal of additional tool material from behind the relief angle. Clearance Angle - The angle formed by the cleared surface and line tangent to the cutting edge. Clearance: Primary (1st angle, 5°-9°) - Relief adjacent to the cutting edge. Clearance: Secondary (2nd angle, 14°-17°) - Relief adjacent to cutting edge Clearance: Tertiary (3rd) - Additional relief clearance provided adjacent to the secondary angle. Concave - Small hollow required on the end face of an End mill. This feature is produced by a Dish angle produced on the cutter. Convex - An outward projection radius feature on the end face of a Ball mill. Dish Angle - The angle formed by the end cutting edge and a plane perpendicular to the cutter axis. Dish ensures that a flat surface is produced by the cutter. Gash (Notch) - The secondary cuts on a tool to provide chip space at corners and ends. The space forming the end cutting edge, which is used when feeding axially. Gash angle - The relief angle of the gash feature. Gash width - The width of the gash feature. The space between cutting edges, which provides chip space and retargeting capabilities. Sometimes called the flute. Heel - The back edge of the relieved land. It is the surface of the tooth trailing the cutting edge. Helical - A cutting edge or flute which progresses uniformly around a cylindrical surface in an axial direction. The normal helical direction is a right direction spiral. Helix Angle - The angle formed by a line tangent to the helix and a plane through the axis of the cutter or the cutting edge angle which a helical cutting edge makes with a plane containing the axis of a cylindrical cutter. Hook - A term used to refer to a concave condition of a tooth face. This term implies a curved surface rather than a straight surface. Hook must be measured at the cutting edge, making measurement difficult. Land - The narrow surface of a profile sharpened cutter tooth immediately behind the cutting edge, (A) Cylindrical - a narrow portion of the peripheral land, adjacent to the cutting edge, having no radial relief. (B) Relieved - A portion of the land adjacent to the cutting edge, which provides relief. Lead - The axial advance of a helical cutting edge in one revolution. Lead = (Cutter diameter x Pi) / Tangent Helix Angle Length of Cut (Flute Length) - The effective axial length of the peripheral cutting edge which has been relieved to cut. Radial Rake angle - The angle made by the rake face and a radius measured in a plane normal to the axis. Rake - The angular relationship between the tooth face or a tangent to the tooth face at a given point and a reference plane or line. An angular feature ground onto the surface of an end mill. Axial rake - The angle formed by a plane passing through the axis and a line coinciding with or tangent to the tooth face. Effective rake - The rake angle influencing chip formation most is that measured normal to the cutting edge. The effective rake angle is greatly affected by the radial and axial rakes only when corner angles are involved. Helical rake - For most purposes the terms helical and axial rake can be used interchangeably. It is the inclination of the tooth face with reference to a plane through the cutter axis. Negative Rake - Exists when the initial contact between tool and work piece occurs at a point or line on the tooth other than the cutting edge. The rake surface leads the cutting edge. Positive Rake - Exists when the initial contact between the cutter and the work piece occurs at the cutting edge. The cutting edge leads the rake surface. Relief-Space - Provided by removing material immediately behind the cutting edge. Done to eliminate the possibility of heeling or rubbing. Axial angle relief - The angle made by a line tangent to the relieved surface at the end cutting edge and a plane normal to the axis. Axial relief - The relief measured in the axial direction between a plane perpendicular to the axis at the cutting edge and the relieved surface. Helps to prevent rubbing as the corner wears. Concave relief - The relieved surface behind the cutting edge having a concave form. Produced by a grinding wheel set at 90 degrees to the cutter axis. Eccentric relief - The relieved surface behind the cutting edge having a convex form. Produced by a type I wheel presented at an angle to the cutter axis. End relief - Relief on the end of an end mill. Needed only for plunging cutters and to relieve rubbing as the result of corner wear. Flat relief - The relieved surface behind the cutting edge having a flat surface produced by the face of a cup wheel. Radial relief - Relief in a radial direction measured in the plane of rotation. It can be measured by the amount of indicator drop at a given radius in a given amount of angular rotation. Tangential rake angle - The angle made by a line tangent to a hooked tooth at the cutting edge and a radius passing through the same point in plane normal to the axis. 2mm to 14mm 25piece pacing. 15mm to plus single piece packing.
Plain Type,60 degree included angle,right-hand cut Made from super speed steel,bright finish. This tool is used for centering work ends,where the work-piece is to be revolved on machine centers. 60 degree countersink angle fits all standard centers. 25 piece packing and single piece packing.
1, the classification: drilling, exploration, oil, drill, and drilling accessories 2, the product name: 215.9 mm 8 1/2 inches £¬rubber sealing disc bit three 3, product introduction: H series bit for O form rubber sealing sliding bearing drill bit, in a routine use can withstand high speed drilling of pressure. 4, its main structure features: 1) using high strength and high toughness cemented carbide gear, improve the shock resistance ability of teeth, reduce the broken teeth rate 2) the optimization of the tooth row number, gear, toothy height and unique alloy tooth shape, give full play to the drill bit cutting ability and the cutting speed 3) the card spring lock, able to bear high disc drilling pressure 4) die hole with gold, and improve the welding minus integration of the bearing capacity of bite 5) using high saturated acrylonitrile-butadiene rubber sealing ring, optimization of o-type seal compression quantity and improve the reliability of the bearing seal 6) can limit the pressure difference and prevent drilling fluid into the lubrication system of the rubber oil storage sac, for bearing system provides good lubrication, and to ensure that "O" type sealing ring, improve the normal work bit working life 7) with 250 ¡æ high temperature resistance, low wear new, improving the drill bit sealing grease lubrication system high temperature resistant ability. According to the customer request.
Model: shale shaker QZS703 Vibration force: 76kn Capacity(m3/h, gpm):90/396 Screen meshes:40-200meshes. Weight:1960kgs Dimension:2580x1840x1640mm.
Size:0.5-40mm Material:tungsten carbide or hss Can be customized. Can be customized According to requirement.
Size:0.5-40mm Material:tungsten carbide or HSS. According to requirement.
Precision turned pars as per customer's drawing.
Lianyungang huanghai machinery factory co.,Ltd. can design and manufacture special type core drilling rigs according to clients requirements. Trailer-type XY-42 drill rig is a new product which is manufactured following customer special requirements. It is mounted on trailer with four hydraulic jacks and four tires. The dimension of trailer is suitable for mounting main machine and mud pump. It can be moved well and freely at site.
Suitable for either drilling downward or inclined blast holes in medium-hard or hard rock, or for second blasting operation. Centrally grouped control, nimble starting, stable running and easy maintenance.
