1.The brief introductions of SJD-2B collapsible electric water well drilling rig
The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on.
2.The specifications of SJD-2B collapsible electric water well drilling rig
·Punching range: 60-250mm;
·Drill pipe diameter: 1.2 inch;
·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters.
·Voltage: 220V
·Rotary motor: 4000W;
·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W;
·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible).
·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.The brief introductions of SJD-2B collapsible electric water well drilling rig
The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on.
2.The specifications of SJD-2B collapsible electric water well drilling rig
·Punching range: 60-250mm;
·Drill pipe diameter: 1.2 inch;
·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters.
·Voltage: 220V
·Rotary motor: 4000W;
·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W;
·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible).
·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.The brief introductions of gasoline engine water well drilling rig
·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance.
·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced.
·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors.
·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well.
2 .The features of the gasoline engine water well drilling rig
The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on.
The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg.
Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1. The brief introduction of the double-seat long spiral pile driver
Double cab long spiral pile driver can generate electricity and external power, which is suitable for construction industry, highway, power facilities and other piling. This car has the characteristics of fast positioning, quick piling, high efficiency and so on.
2.The technical parameters of the double-seat long spiral pile driver
Item Unit Parameters
Dimension cm 750*200*300
Vehicle weight t 6.8
Borehole diameter mm 150-1100
Drilling depth m 6-11(Retractable drill pipe)
Rotation angle ° 270
Power head power kw 30
Power head speed rpm 40
Maximum torque kn.m 7800
Climbing ability ° 45
Moving speed km/h 50
Drill pipe diameter mm 150-1100
Customization yes
(In the continuous improvement of products, technical parameters are based on practical consultation.)
1.The brief introductions of electric pile driver
Electric pile driver can generate electricity by its own or external power, which is suitable for building construction foundation , highway foundation reinforcement, high-speed railway power facilities, wind power plant, solar photovoltaic power plant, soft soil treatment, reinforcement and other piling projects.
2. The features of electric pile driver
·Professional design
·Elegant appearance
·Simple operation
·The pile driver can move back and forth, rotate around
·It has the characteristics of fast positioning, quick piling, quick drawing, high efficiency
·Ir can be customized according to the requirements of customers.
3.The technical parameters of electric pile driver
Item Unit Parameters
Rated power kw 56
Rated speed r/min 2400
Starting voltage v 24
Dimension (long*wide *high) mm 4600*2000*2700
Minimum ground clearance mm 380
Caterpillar width mm 260
Highest standing pipe highest standing pipe 4370
Borehole diameter mm 70-800
Maximum drilling depth mm 3000
Drill pipe rotation speed r/min 71
Main pump model CBG1F032/032
Main pump speed l/min 2000-2400
Main pump pressure mpa 20
Main valve flow l/min 100
Hydraulic oil tank volume l 200
Gradient degree 35
Maximum driving speed km/h 5
5760 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
1.The brief introductions of gasoline engine water well drilling rig
·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance.
·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced.
·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors.
·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well.
2 .The features of the gasoline engine water well drilling rig
The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on.
The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg.
Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod
The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects.
2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod
High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability.
3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod
The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm.
Item Unit Parameters
XWDF-15 crawler rotary pile drilling rig with square power rod
Working mode cylinder pressure wire rope deadweight
Drilling hole diameter mm 500-1500
Drilling hole depth m 15 10-26
Dimension m 8.7*2.3*3.1
Weight (excluding drilling tools in standard configuration) t 13
Maximum torque of power head kn.m 26000
Power head rotating speed r/min 20-40
Turntable rotation angle Full gyration
Maximum moving speed km/h 2.6
Maximum grade ability ° 25
Engine model / 6105 medium cold turbocharging in Weifang
Engine power kw 145
(In the con
tinuous improvement of products, technical parameters are based on practical consultation.)
1. The brief introductions of 28 meters crawler rotary pile drilling rig with circular power rod
With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on.
Compared with the ordinary rotary drilling rig, the rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable.
2.The features of28 meters crawler rotary pile drilling rig with circular power rod
The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance.
The double winching winch is selected with infinite rotation. The main winch is guaranteed to achieve the rated load. The winching speed of the single winch is 100m/s, which is increased by two times compared with that of the previous year.
The hydraulic system exclusive of reasonable matching, the summer temperature is normal excluding radiator.
3.The technical parameters of 28 meters crawler rotary pile drilling rig with circular power rod
Item Unit Parameters
XWDJ-28 crawler rotary pile drilling rig with circular power rod
Maximum borehole diameter mm 1400
Maximum drilling depth m 28
Engine model / Cummins GBT5.9-C150
rated power / speed kn 110/2000 r/min
Power head maximum torque kn.m 100
speed r/min 17-40
Feed cylinder maximum pressure kn 100
maximum lifting power kn 100
shock mm 2000
Main winch maximum lifting power kn 100
maximum single rope speed m/min 70
wire rope diameter mm 24
Minor Winch maximum lifting power kn 60
maximum single rope speed m/min 54
wire rope diameter mm 16
Move ability maximum move speed km/h 2.6
minimum ground clearance mm 340
approach angle ° 21
departure angle ° 18
maximum grade ability ° 30
Weight(excluding drilling tools in standard configuration). t 24
Dimension (transport state) (l *w* h) mm 10300*2600*3500
(In the continuous improvement of products, technical parameters are based on practical consultation.)
1.Brief introductions of YQZ-30 hydraulic core drilling rig
YQZ-30 hydraulic core drilling rig is a small portable diesel oil drilling machine. It is mainly used for prospecting and exploration, geophysical exploration,drilling engineering such as road construction and blasting hole, shallow oil, natural gas and groundwater drilling. It also can be used for engineering drilling of dam grouting and tunnel ventilation and drainage. The drilling depth of YQZ-30 hydraulic core drilling rig is 30 meters. The open hole diameter is 89mm, and the final hole diameter is 75mm.
2.Features of YQZ-30 hydraulic core drilling rig
·Oil pressure automatic feeding mechanism, high drilling efficiency.
·Using the upper ball clamp mechanism, non-stop re-chuck
·Handles are centralized, easy to operate, safe and reliable.
·Compact structure, small floor space.
·The shell of drill rig and gearbox are made of aluminum. The shell reduce the weight of the fuselage.
· Easy to decomposition and move, suitable for working in hilly terrain, mountainous areas and other complex terrain.
3. Technical parameters of YQZ-30 hydraulic core drilling rig
Main engine
Drilling depth 30m Drill pipe diameter 42mm
Open hole diameter 91-110mm End hole diameter 75 mm
Drilling rig weight 198kg(No power) Drilling rig dimension 1400*600*1055mm
Windlass
Maximum hoist capacity 4kn Coiling block diameter 90mm
Wire rope diameter 8mm Maximum length 18m
The band type brake diameter 200mm The band type brake width 35mm
Vertical shaft
Rotating speed 136/338/578r/min Stroke 400mm
Maximum pressure 8kn Lifting power 10kn
Oil pump
Model YBC20/125 Rated pressure 12.5Mpa
Rate of flow 20ml/r Rated rotate speed 1500r/min
Power
Diesel engine R180 Cooling type water-cooling
Rated power 5.67KW Rated rotate speed 2600r/min
4.Configuration list of YQZ-30 hydraulic core drilling rig
Item Specification Unit Quantity
Hydraulic core drilling rig YQZ-30 Platform 1
Drill pipe including joint 42 m 30
Reducing nipple joint 57/57 pc 2
Reducing nipple 89*57 pc 1
Opening pipe 89 pc 1
Alloy bit 91 pc 1
Reducing nipple 73 pc 1
Core barrel 73 pc 1
Diamond bit 75 pc 1
Water pump diesel engine power set 1
Drill tower 3m set 1
Wire rope 10mm m 20
Rope cappel pc 4
U shape ring pc 1
Flat square main rod 2m/pc pc 1
Reducing nipple for main rod pc 1
Water faucet pc 1
Lifter pc 1
U-fork 57 pc 1
Safety clamp 57 pc 1
Pliers 24 pc 1
L-wrench 73/89 pc 2
1.Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
1. Characteristics of XYX-200 wheeled hydraulic core drilling rig
·hydraulic cylinder, high efficiency
·wheeled walking mechanism, very convenient for transport and adjusting the drilling rig level.
·pressure gauge display the condition of the bottom of the drill hole.
·the drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod.
·the working efficiency is high and the operation is convenient, safe and reliable.
2. Technical parameters of XYX-200 wheeled hydraulic core drilling rig
XYX-200 wheeled hydraulic core drilling rig
Drill hole depth 200m
Maximum opening diameter 300mm
Final hole diameter 75mm
Drill pipe diameter 60mm
Borehole inclination 90°-75°
Rig weight (without power) 1300kg
Trigonometric belt B950*4 B1700*3
Active moving distance 300mm
Power Diesel engine/motor 22hp/16.2kw
A vertical scroll of painting
Shaft rotation speed 64/128/ 287/ 557 r/min
Vertical axis stroke 450mm
Windlass
Maximum lifting weight of single rope 2400kg
Single rope lifting speed 0.41/ 0.82/1.64m/s
Wire rope diameter 13mm
Wire rope capacity 35m
Hug floodgate caliber 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single cylinder double action
Maximum displacement Diesel engine 170L/min
Matching motor 150L/min
Maximum pressure 3Mpa
Work pressure 1.5Mpa
Inlet pipe caliber 40mm
Outlet pipe caliber 30mm
Triangle conveyer belt B1728mm
Type CBT-F-314
Triangle conveyer belt B1100*1
1. Characteristics of XYC-200 vehicle-mounted hydraulic core drilling rig
·XYC-200 is a multi-function vehicle-mounted hydraulic core drilling rig.Automobile chassis chassis, transmission system and rig winch, mud pump and other important accessories installed in the chassis. the layout is reasonable, compact, and easy to operate.
·It is equipped with high pressure,big flow BW160 mud pump,which can ensure drilling depth and diameter.
·the rig has shifting device, it can move on the vehicle and is convenient to operate while drilling.
·the hydraulic folding mast is safe and convenient to transport
2.Applications of XYC-200 vehicle-mounted hydraulic core drilling rig
·road and high-rise building foundation exploration
·all kinds of concrete structure inspection holes
·river embankments
·subgrade grouting holes
·drilling and direct grouting
·civil water well
·ground temperature central air conditioners.
3. Parameters of XYC-200 vehicle-mounted hydraulic core drilling rig
XYC-200 vehicle-mounted hydraulic core drilling rig
Drilling depth(m) 30-200
Drilling diameter(mm) 300-75
Drilling angel(mm) 90-75
Spindle rotating speed(r/min) 64/128/287/557
Spindle stroke(mm) 450
Main hoisting capacity
(single line)(Kg) 1600
Main hoisting line capacity
(m) 35
Hoisting speed(r/s) 17/35/75/151
Wireline diameter(mm) 12.5
Mast height(mm) 7000
Mast effective height(mm) 6500
Kelly/active pipe(mm) 59*53
Drill rod(mm) 42/50/60
Drill rig weight(kg) 1150
Power unit Model ZS1115 diesel engine
Rated power 14.7kw/2200rpm
BW-160 mud pump Rated flow(l/min) 160
Rated pressure(mpa) 1.3
Driving power(kw) 5.15
Main machine weight
(kg) 190
Dimension(mm) 1110*725*965
Chassis light truck(Pictures of vehicle-mounted drilling rigs for reference only)
1.Brief introductions of KY-200 hydraulic exploration drilling rig for metal mine
KY-200 hydraulic exploration drilling rig for metal mine is widely used for tunnel and surface geological exploration and can drill the hole from any angle. The KY-200 hydraulic exploration drilling rig for metal mine adopts the structure of all hydraulic power head and consists of three parts: main engine, pump station and operation floor. The hydraulic exploration drilling rig for metal mine is easy to disassemble and is convenient to transport. The drilling rig arrangement is flexible. Drilling pipe screwing and unscrewing is mechanized. It can save labour cost and improve work efficiency. And it has infinitely variable speeds.
KY-200 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe through controlling the operation floor. The spindle of the gyration adopts the through hole structure. The length of the drill rod is not restricted by the drilling machine, and it can also be applied to the diamond wire-line coring drilling.
2.Specifications of KY-200 hydraulic exploration drilling rig for metal mine
Drilling pipe diameter (mm) 33 43 Output torque (n.m) 81-295
Borehole depth (m) 200 160 Feed capability(kn) 27
Feeding stroke (mm) 850 Pullout capability (kn) 20
Spindle speed (r/min) 600-2000 Motor power (kw) 22
1.Brief introductions of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work.
2.Features of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. .
3.Applications of SH30-2A exploration drilling rig
The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function.
4.Impact tool of SH30-2A exploration drilling rig
The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler.
Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c
5.Rotary tool (Not include in standard configuration).
Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter,
6.Specifications of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig
Drilling depth 30m
Drilling pipe diameter 42mm
Aperture diameter 142mm
End hole diameter 110mm
Drill form and vertical height 4 legs, 6m
Power
Motor Y132S2-2/ 7.5kw/3000 r/min
Diesel engine D180Z/ 8hp/2400 r/min
Windlass
Lifting speed 0.24/ 0.57/1.48m/s
Maximum lifting power (single rope, low speed) 15kn
Turntable
Diameter 150mm
Turntable speed 18/44/110r/min
Dimension
Length*width*height 1780*1010*900mm
Weight 500kg
1.Brief introductions of BXZ-2 backpack core drilling rig
BXZ-2 backpack core drilling rig is a revolutionary portable geological core drilling rig that is made in China. If you want to buy a backpack drilling rig with big horse power, please identify "HuaxiaMaster" backpack drill. This portable rig is specifically for mineral investigation, oil exploration, geological research and exploration. We have ten years experience of producing core drilling rig. Shandong Master Machinery Group Co.,Ltd believes that the backpack drilling rig will give you great satisfactions and get your work done perfectly.
2.Applications of BXZ-2 backpack core drilling rig
·mineral prospecting
·geotechnical engineering
·geoscientific research
·tunnel lining
·inflected arch detection
·highway engineering geological exploration
·hydraulic engineering geological exploratory
·oil exploration
·lode prospect
3.Features of BXZ-2 backpack core drilling rig
·compact & portable
·simple to operate
·easy to assemble and disassemble
·convenient to move
·ideal choice to work in remote location
4.Configuration list of BXZ-2 backpack core drilling rig
Item Parameter Unit Quantity
Drilling rig engine Kohler 7.75HP set 1
Drill pipe 33*700mm pc. 28
Drill pipe joint 33*100mm pc 28
Core barrel 33*600mm pc 1
Reducing nipple pc 1
Alloy bit 33mm pc 1
Composite bit 33mm pc 1
Diamond bit 33mm pc 1
Manual mud pump set 1
Mud pump ( gasoline engine) high pressure platform 1
Maintenance kit gasoline slurry pump set 1
Inlet hose pipe set 1
Inflow water filter pc 1
Outlet hose pipe set 1
Safety plate pc 1
Safety clamp pc 1
Pipe wrench pc 1
Specialized backpack pc 1
1.Brief introduction of QZ-2A three phase electric sampling drilling rig
QZ-2A is a three phase electric sampling drilling rig , produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for industrial and civil buildings, bridges, railways, roads, utilities and other sectors of the geological exploration.
2. Technical parameters of QZ-2A three phase electric sampling drilling rig
QZ-2A three phase electric sampling drilling rig
Borehole diameter (mm) 32-91
Drilling depthï¼?mï¼? soilÏ??10-15m
stoneÏ??5-10m
stoneÏ?75ï¼?10-15m
stoneÏ?60ï¼?15-20m
stoneÏ?46ï¼?20-25m
Drilling pipe diameter (mm) 28
Rotate speedï¼?r/minï¼? 185-380
Torqueï¼?n.mï¼? 80
Powerï¼?kwï¼? 3
Dimensionï¼?l*w*hï¼? 600*450*1900
Weightï¼?kgï¼? 95
3. Configuration list of QZ-2A three phase electric sampling drilling rig
Item Parameter Unit Quantity
Three phase electric sampling drilling rig QZ-2A platform 1
Drilling pipe 28*1500 pc 6
Drilling pipe 28*800 pc 8
Drilling joint 35 pc 14
Reducing nipple 45/35 pc 1
Core barrel 45*800 pc 1
Alloy bit 46 pc 1
Reducing nipple 58/35 pc 1
Core barrel 58*800 pc 1
Alloy bit 60 pc 1
Three-wing bit 0 pc 1
Safety clamp hold 1
Water seal Y30*50*10 pc 4
Oil seal 17*50*10 pc 2
Control wheel set 1
1.Brief introductions of QZ-3 diesel engine sampling drilling rig
The QZ-3 diesel engine sampling drilling rig is independently developed by Shandong Master Machinery Group Co.,Ltd., which is a portable multi-purpose drilling rig. The QZ-3 diesel engine sampling drilling rig is equipped with a hoist, which is more convenient for geological drilling and lifting. It can do standard drilling hole, earth sampling and cone penetration with the heavy hammer.
The QZ-3 diesel engine sampling drilling rig uses diesel power, and it is more convenient to purchase oil. The rig is reasonable in design, advanced in structure, easy to assemble and disassemble, small in size, light in weight and easy to transport, which brings great convenience for field investigation and construction.
2. Technical parameters of QZ-3 diesel engine sampling drilling rig
QZ-3 diesel engine sampling drilling rig
Borehole diameter (mm) 46-110
1.Brief introductions of HDrillingZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage.
2.Applications of HZ-130YY hydraulic core drilling rig
·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes.
·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite.
·2-9 grades of sandy clay and rock.
3.Features of HZ-130YY hydraulic core drilling rig
·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers.
·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable.
·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact
·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on.
This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance.
4.Technical parameters of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig
Drill hole depth 130m
Maximum opening diameter 75-220mm
Final hole diameter 75mm
Take the initiative to drill pipe 53/59*4200mm
Drill pipe diameter 50mm
Borehole inclination 90°-75°
Power(diesel engine) 13.2kw 2200r/min
Size 850kg/2400*950*1400
Vertical shaft
Vertical spindle speed 142/285/570r/min
Vertical stroke 450mm
Hoist
Single rope lift 9.6kn
Single rope winding speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Diameter of wire rope 9.3mm
Wire rope capacity 27m
Derrick
Rated load 2t
Effective height 6m
Towerleg specifications 73mm
Mud pump
Model BW95
Flow 95l/min
Maximum pressure 1.2mpa
Reciprocating frequency 93r/min
Suction pipe diameter 51mm*4.5m
Diameter of high pressure pipe 32mm*6m
1.The features of XYD-130 crawler hydraulic core drilling rig
The drilling rig adopts the automatic Telescopic style with two high strength oil cylinder support, a set of hydraulic valve control rigs operating supine, which is time-saving, safe and reliable to maximize the benefits for users.
The chassis adopts rubber track, light weight and low life cycle cost, which can reduce noise of vehicle running mechanism, reduce car body vibration, and reduce fuel consumption greatly. It can walk on urban roads without hurting the road surface.
The chassis is equipped with four high strength threaded legs (or hydraulic high leg). The installation and adjustment is fast and convenient. It can be used for leveling of work plane, loading and unloading vehicle, which reduces the hoisting cost and improves efficiency and works as auxiliary support.
The drilling rig uses 48V electricty to start the diesel engine , which greatly reduces the labor usage, especially in the cold season. When the diesel engine has difficulty activiting, this starting mode shows greater advantages.
2.Technical parameters of XYD-130 crawler hydraulic core drilling rig
XYD-130 crawler hydraulic core drilling rig
Drilling depth 130m
Maximum opening diameter 220mm
Diameter of the end hole 75mm
Drilling rod caliber 50mm
Drilling angle 90°-75°
Drill weight (no include power) 2600kg
Spindle
Spindle speed 142/285/570 r/min
Spindle stroke 450mm
Windlass
Max single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64 m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 27m
Mud pump
Type horizontal single urn twin-action
Displacement 95 /77L/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
5760 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
