1. Characteristics of XYD-3 crawler hydraulic water well drilling rig
XYD-3 crawler water well drilling rig is mainly used for geological general investigation and exploration,road and tall building foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,ect.
·The drilling rig is equipped with crawler chassis device, which is easy to move with fast speed.
·The crawler device is made of resistant steel mill.
·Hydraulic oil pressure feed device, which improves drilling efficiency.
·Pressure gauge displays the condition of the bottom of the drill hole.
·Drill mast controlled by hydraulic cyliner so it improves the efficiency.
·Diesel engine adopts the electric starter to reduce the labor usage.
2. Parameters of XYD-3 crawler hydraulic water well drilling rig
Drilling depth 600m
Max. open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90°-75°
Spindle
Spindle forward speed 30-1050r/min
Spindle reverse speed 29-137r/min
Spindle stroke 600mm
Spindle inner diameter 96mm
Main Winch
Single line lifting speed 0.5/0.9/1.4/1.9m/s
Diameter of wire rope 12.5mm
Brake width 90mm
Drum diameter 300mm
The biggest single rope hoisting capacity 30kn
Mud pump
Type Horizontal triples BW-250 Mud Pump
Displacement 250 l/min
Water inlet diameter 75mm
Water outlet diameter 50mm
Power
Diesel engine 38kw
Electric motor Y180L4 22KW
Weight 6500kg
Size 2500*900*1800mm
1.Main features of XYC-3 vehicle-mounted hydraulic water well drilling rig
XYC-3 is a multi-functional hydraulic vehicle-mounted water well drilling rig.The drilling rig transmission system and hoist, mud pump and other important accessories are all installed on the chassis. The layout is reasonable and compact. And the operation is simple.
The drilling rig is equipped with high pressure and large flowBW-250 pump, which ensures the drilling depth and borehole diameter.
2. Applications of XYC-3 vehicle-mounted hydraulic water well drilling rig
·geological survey and exploration
·road and high-rise building foundation exploration
·all kinds of concrete structure inspection holes
·river embankments
·subgrade grouting holes
·drilling and direct grouting
·civil use water wells
·ground temperature central air conditioners
3. Parameters of XYC-3 vehicle-mounted hydraulic water well drilling rig
XYC-3 vehicle-mounted hydraulic water well drilling rig
Drill depth 30-600
Drill hole diameter 300-75
Diameter of the end hole 75
Drill angle 90-75
Spindle forward core speed 30-1050
Spindle reverse core speed 29-137
Spindle stroke 600
Main winch lifting force
(with single line) 3000
Main winch rope capacity 65
Lifting speed 0.3-1.9
Rope diameter 12.5
Drill mast height 7000
Drill effective height 6500
Driving drilling rod 59*53ã??70*63ã??79*89
Drilling rod diameter 42/50/60
Weight 3500
Engine Model:Yunnei YN27
1. Characteristics of XY-44A hydraulic water well drilling rig
XY-44A is a water well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster water well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XY-44A hydraulic water well drilling rig
·water well drilling,
·engineering geology exploration,
·hydrology and water well drilling
·large diameter foundation piles construction
3.Parameters of XY-44A hydraulic water well drilling rig
XY-44A hydraulic water well drilling rig
Drilling depth 600-1400m
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
Spindle
1. Characteristics of XYX-44A wheeled hydraulic water well drilling rig
XY-44A is wheeled water well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster water well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XYX-44A wheeled hydraulic water well drilling rig
·Water well drilling,
·engineering geology exploration,
·hydrology and water well drilling
·large diameter foundation piles construction
3.Parameters of XYX-44A wheeled hydraulic water well drilling rig
XYX-44A wheeled hydraulic water well drilling rig
Drilling depth 600-1400m
Max open hole caliber 300 mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
Spindle
1.Applications of HZ-130Y hydraulic water well drilling rig
·civil water well
·geological survey and exploration
·basic exploration for roads
·high-rise buildings
·inspection holes for various concrete structures
·river embankments
·grouting holes
·direct grouting,
·ground temperature central air conditioners.
2.Features of HZ-130Y hydraulic water well drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
3.Specifications of HZ-130Y hydraulic water well drilling rig
HZ-130Y hydraulic water well drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90-75°
Drill weight (Not include power) 750kg
Spindle
Spindle speed 142ã??285ã??570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
5754 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
1.Brief introductions of QZ-1A two phase electric sampling drilling rig
QZ-1A is a two phase electric sampling drilling rig produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for all kinds of geological exploration, like industrial and civil buildings, bridges, railways, roads and so on. QZ-1A two phase electric sampling drilling rig is only 80kg; height is less than 2 meters, and the drilling rig can been break down structure. Hence it is easy to move and operated.
2.Technical parameter s of QZ-1A two phase electric sampling drilling rig
QZ-1A two phase electric sampling drilling rig
Borehole diameter (mm) 32-46
Drilling depth (m) Soil layer: 20-25
Lithosphere: 15-20
Drilling pipe diameter (mm) 25
Rotate speedï¼?r/minï¼? 175
Torque (n.m) 80
Power (kw) 3
Dimensions (l*w*h) 600mm*450mm*1900mm
Weight (kg) 80
3.Configuration list of QZ-1A two phase electric sampling drilling rig
Item Parameters Unit Quantity
Two phase electric sampling drilling rig QZ-1A set 1
Drill pipe(mm) 25*1500 pc 6
Drill pipe(mm) 25*800 pc 8
Joint(mm) 32 pc 14
Core barrel(mm) 32*800 pc 1
Alloy bit(mm) 32 pc 1
Reducing nipple(mm) 45/32 pc 1
Core barrel(mm) 45*800 pc 1
Alloy bit(mm) 46 pc 1
Three-wing bit(mm) 60 pc 1
Safety clamp pc 1
Water seal Y Type 30*45*8 pc 4
Control wheel set 1
1.The features of SPJ-300 water well drilling rig
·SPJ-300 water well drilling rig is powered by electric motors.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc..
·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device
2.The specifications of SPJ-300 water well drilling rig
Borehole diameter 500mm-1500mm
Drilling depth 300m
Maximum output torque 18kn.m
Active drilling pipe 108*108*12mm
Drilling pipe 89mm
Main windlass lifting power 30kn
Assistantwindlass lifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
Height of the drilling tower 13m
Gross weight (excluding drill rod) 9t
External dimension 2200*6000*13000mm
Drilling tower Type A / hydraulic drill tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-600 water well drilling rig
SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers.
The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted.
2.The specifications of SPJ-600 water well drilling rig
Drilling depth 600m
Borehole diameter 500mm-2500mm
Rotary table latus rectum 605mm
Active drillingpipe 108*108*12mm
Drilling pipe 89mm
Rotary speed 42/75/134kn.m
Main windlass single rope lifting power 35kn
hook rated load 210kn
hook lifting speed 0.15-0.47m/s
pulley block model 3*3
wire-rope diameter 20-21.5mm
Assistant windlass single rope rated lifting power 15kn
maximum lifting power of a single rope 20kn
single rope rated lifting speed 0.58m/s
wire-rope diameter 9.8mm
Windlass power 37kw
Gross weight (excluding drillingpipe) 11t
1.The applications of KQZ-180D pneumatic water well drilling rig
KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use.
2.The specifications of KQZ-180D pneumatic water well drilling rig
Drilling hole diameter 100-219mm
Drilling depth 150m
Drilling angle ground to 45-90°
Feed stroke 1500mm
Motor power 7.5kw
Rotary speed 0-78rpm
Wind pressure 0.8-2.1mpa
Air consumption 13-21L/min
Gross weight 600kg
1.Features of KY-150 hydraulic exploration drilling rig for metal mine
KY-150 hydraulic exploration drilling rig for metal mine is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds.
KY-150 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling.
KY-150 hydraulic exploration drilling rig for metal mine uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling.
2.Components of KY-150 hydraulic exploration drilling rig for metal mine
The KY-150 hydraulic exploration drilling rig for metal mine adopts the structure of full hydraulic power head, and consists of three parts: main engine, pump station and operating floor.
3.Specifications of KY-150 hydraulic exploration drilling rig for metal mine
Borehole diameter 36.5mm/46.5mm
Drilling depth 150ï¼?Ï?33 steel drill pipeï¼?/120ï¼?Ï?43 steel drill pipeï¼?/150(Ï?43 aluminum alloy drill pipe)
Borehole angle 0°-360°
Spindle speed 400-1400 r/min
Spindle output torque 87-300 n.m
Rated pull force 30 kn
Rated pull speed > 0.3 m/s
Oil supply mode double gear pump
Hydraulic oil mode antiwear hydraulic oil YB-N46/YB-N32 (winter)
Motor model manual variable motor A6V55MA
Motor specifications Y180M-4/18.5 kw
Equipment weight main engine166kg/backbone 40kg/operation floor 86kg/power car 210kg
1.The brief introductions of KQZ-200D pneumatic water well drilling rig
KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area.
2.The specifications of KQZ-200D pneumatic water well drilling rig
KQZ-200D pneumatic water well drilling rig
Borehole diameter mm 100-254
Borehole depth m 200
Drilling angle ° 45-90
One-time feed stroke mm 1500
Motor power kw 11
Diesel engine power hp 8.5
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine
KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance.
2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine
Drilling diameter (mm) ø47
Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe)
Power 37kw (motor)
Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
1.Brief introductions of KHYD75 electric rock drilling rig
·electric rock drilling rig can be fitted with drilling stand, and can be drilled horizontally or inclined upward.
·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining.
·In drilling operations, we only need to operate the handwheel, and the electric motor rock drilling rig can advance and return quickly.
2.Specifications of KHYD75 electric rock drilling rig
Model Unit KHYD75
Rated output power of electric motor kw 3
Rated voltage of electric motor v 380/660
Rated frequency of electric motor hz 50
Rated current of electric motor a 6.8/3.9
Motor rotating speed r/min 1420
Working mode continuity
Drilling speed mm/min 320
Rig return speed m/min
Borehole diameter mm 42(rockï¼?
Hardness range protodikonov`s scale of hardness f
1.The applications of KQZ-180D pneumatic water well drilling rig
KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use.
2.The specifications of KQZ-180D pneumatic water well drilling rig
Drilling hole diameter 100-219mm
Drilling depth 150m
Drilling angle ground to 45-90°
Feed stroke 1500mm
Motor power 7.5kw
Rotary speed 0-78rpm
Wind pressure 0.8-2.1mpa
Air consumption 13-21L/min
Gross weight 600kg
1.Brief introductions of KY-250 hydraulic exploration drilling rig for metal mine
The KY250 hydraulic explortation drilling rig for metal mine is
·small in size
·light weight
·convenient to install and operate
·excellent linkage and adjustable speed range
·suitable for drilling at any angle in the tunnel or surface.
2.Specifications of KY-250 hydraulic exploration drilling rig for metal mine
Drilling diameter Φ36.5mm /Φ46.5mm
Drilling depth 250m�ø33 Steel drill pipe�/200m�ø43 Steel drill pipe�
Borehole angle 0°-360°
Spindle speed 400-1400r/min
Spindle output torque 150-400nm
Rated pulling force 40kn
Rated pulling speed ï¼?0.3m/s
Oil supply mode double gear pump
Rated system pressure 16mpa
Oil pump model CBF-F71/10
Hydraulic oil model antiwear hydraulic oil YB-N46/YB-N32 (winter)
Motor model manual variable motor A6V80MA
Motor specification 30kw
Weight main engine 275kg/backbone 40kg/operating floor86kg/power car 420kg
1.Applications of KY-6075 steel strand wire exploration drilling rig for metal mine
The fully hydraulic steel strand wire core drilling rig is suitable for the chamber with complete roof, no broken, no quicksand and no support.
·Horizontal drilling: the chamber requires the height is 2000mm and the width is 2000mm.
·Horizontal lateral drilling: the chamber requires the height 2000mm and the width is 4000mm.
·Vertical upper and lower angle drilling: the chamber requires the height is 4000mm and the width is 2000mm.
2.Features of KY-6075 steel strand wire exploration drilling rig for metal mine
·It is small in size, light in weight and easy to install. The steel strand wire coring can work in all direction and core without pulling out drill pipe.
·Three parts: the main engine, the pump station, the operating floor.
·It can work in the original transportation and prospecting tunnel, and play a protective role in the overall structure of the mine. It can also be used for 0-90 degree surface drilling.
·The drilling rig is arranged with great flexibility, mechanically screwing and unscrewing drill pipe, so it will reduce labour costs and improve work efficiency.
·With the box feeding frame, gripper tightening, power head rotary drilling, oil cylinder delivery tool, you can get rid of the heavy drilling tower..
·It has the function of linkage, centralized control through operating floor, simple and safe, and no speed regulation.
·Hollow shaft design, drill pipe length is not restricted by drilling rig feed stroke.
·It is easy to disassemble, and the relocation is convenient. Three kinds of drilling pipe, Φ49-Φ60-Φ75, can be used on the same machine. It takes only 15 minutes to replace it.
·Compact operating table; oil pump, water pump, power supply centralized .
·The drawing column is suitable for the high and low lanes.
·The imported oil meter line is subjected to high pressure and its softness will reduce the pressure pulse of high pressure oil, so that it can make the pointer of hydraulic oil table more stable, and can detect the formation and rock changes in time.
·The special custom oil temperature cooler, high pressure oil cooling soon and low temperature application can protect the service life of motor, oil pump and rubber seal.
1. Introduction of YN27A internal combustion rock drill
The YN27A internal combustion rock drill is widely used in an internal combustion type rock drill for mining, road construction, quarrying, national defense engineering, etc. The rock drill is easy to operate. The rock drill is suitable for areas with no power supply and no wind pressure equipment and temporary engineering with large fluidity. Especially suitable
2.Features of YN27A internal combustion rock drill
·It is not necessary to replace the internal parts of the machine head, just move the handle as required to operate.
·The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency.
·The machine has reached the first-class level of similar products and can be completely interchanged with international similar products.
·Drill holes in the rock, which can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters.
·The weight of the main unit is only 27 kg, which is convenient to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large fluidity.
·This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°.
3.Parameters of YN27A internal combustion rock drill
·Host weight: 27kg
·Engine type: Single cylinder air-cooled two-stroke gasoline engine
·Carburetor type: No float
·Ignition method: Thyristor contactless system
·Engine capacity:185 cm³
·Engine load speed:(Determined when chiseling five holesï¼?ï¼?â?¥2450 r/min
·Drill rod idle speedï¼?â?¥200r/min
·Shank size tailï¼?Hexagon 22|*108 mm
·Deepest hole penetration depthï¼?â?¥6 m
·Fuel tank capacityï¼?â?¥1.14 L
·Punching speedï¼?â?¥250mm/min
·Gasoline and lubricating oil mixing ratio:(By volumeï¼?ï¼?9:1
·Spark plug electrode gap:0.5-0.7 mm
·Fuel consumption rate:(Determined when chiseling five holes):â?¤0.12L/M
·Impact energy:â?¥20J
Shandong Master Machinery Group specializes in supplying internal combustion rock drill. The main models are YN27A, YN27P, YN27C.
1.Introduction of YN27C internal combustion rock drill
The YN27C internal combustion rock drill has various functions such as mining, drilling, building construction, geological exploration, cement pavement, asphalt pavement and other functions such as splitting, crushing, compacting and shovel. It is widely used in mining, road construction, quarrying, construction, railway tamping, geological survey, national defense engineering, etc.
2.Features of YN27C internal combustion rock drill
You only need to move the handle as required to complete the drilling or crushing operation.
The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency.
The machine has reached the first-class level of similar products and can be completely interchanged with international similar products.
The drilling can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters.
The weight of the main machine is only 27 kg. Only one person can operate it. It is easy to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large mobility.
This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°.
This machine adopts export packaging, and all the indicators meet the export standards. This product is exempt from inspection and does not require commodity inspection for export. Since only gasoline needs to be added to work, no other auxiliary equipment is needed.
This machine is suitable for mining of various mines such as iron ore, copper mine, nickel mine, lead-zinc mine, gold mine, gemstone mine, granite, bluestone and jade.
3.Parameters of YN27C internal combustion rock drill
Host weight: 27kg
Engine type: single cylinder air-cooled two-stroke gasoline engine
Carburetor type: no float
Ignition method: thermistor contactless system
Engine displacement: 185 cm³
Engine load speed (measured when chiseling five holes): â?¥2450r/min
Drill rod idle speed: â?¥200r/min
Shank size drill rod tail: hexagon 22*108mm
Deepest hole drilling depth: â?¥6m
Fuel tank volume: â?¥1.14L
Punching speed: â?¥250mm/min
Gasoline and lubricating oil mixing ratio (by volume): 12:1
Spark plug electrode gap: 0.5-0.7mm
Fuel consumption rate (measured when chiseling five holes: â?¤0.12L/M
Impact energy: â?¥25J
Shandong Master Machinery Group specializes in supplying internal combustion rock drills. The main models are YN27A, YN27P and YN27C.
5754 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
